Flash Memory IC Chip
DS90CR216A LVDS Receiver IC 3.3V 20-66MHz 48-Pin TSSOP
High-speed LVDS receiver converting 3 LVDS data streams to 21-bit parallel output. Supports 20-66 MHz clock, 7 kV. Ideal for automotive infotainment and industrial imaging. AEC-Q100 qualified.
DS125DF111 Dual Channel Retimer IC 9.8-12.5 Gbps 24-Pin WQFN Signal Buffer Repeater
The DS125DF111 is a dual channel retimer with adaptive CTLE and 5-tap DFE, supporting data rates from 9.8 to 12.5 Gbps. Low power consumption at 220 mW per channel. Ideal for 10G Ethernet and CPRI. Operating temp -40°C to 85°C. Available in 4x4 mm WQFN package.
TRS213CDBR RS-232 Interface IC 5V Multichannel Line Driver Receiver 120 kbit/s
The TRS213CDBR is a 5V multichannel RS-232 interface IC with 4 drivers and 5 receivers. Features ±15-kV ESD protection, operates up to 120 kbit/s, and meets TIA/EIA-232-F standards. Ideal for battery-powered systems, PDAs, and notebooks. Low shutdown current of 15 μA typical.
TPS65983B USB Type-C PD Controller IC 3A 20V BGA96 USB Power Delivery Interface
Standalone USB Type-C and Power Delivery controller supporting PD2.0/PD3.0, Fast Role Swap, and BMC. Features integrated 5V-20V 3A bidirectional power switch, overcurrent protection, and alternate mode support for Thunderbolt 3. Available in 0.5mm pitch BGA package.
TPD12S521DBTR HDMI Receiver Port Protection IC 0.8pF Capacitance 55mA
The TPD12S521DBTR is a single-chip ESD protection IC for HDMI transmitter ports, offering IEC 61000-4-2 Level 4 protection. With 0.8pF capacitance on TMDS lines and a 55mA current regulator, it supports HDMI 1.4 data rates. The 38-pin TSSOP package matches HDMI connector pitch for seamless layout.
TLV320AIC3104IRHBR Low Power Stereo Audio Codec 32-Pin QFN 5mm x 5mm
Low-power stereo audio codec with 102-dBA SNR DAC and 92-dBA SNR ADC. Supports 8 kHz to 96 kHz sample rates, I2C control, and flexible power modes. Ideal for portable audio and telephony applications.
TCAN1042HDR TCAN1042HVDR CAN Transceiver IC ISO 11898-2 2Mbps 5Mbps SOIC-8
Industrial CAN transceiver supporting classic CAN and CAN FD up to 5 Mbps. Meets ISO 11898-2:2016 with ±70V bus fault protection, ±16kV HBM ESD, and wide -55°C to 150°C operation. Ideal for heavy machinery, automation, and ISOBUS applications.
TCA9517DGKR I2C Bus Repeater Level-Translating Buffer 0.9V to 5.5V
The TCA9517DGKR is a bidirectional I2C bus repeater with voltage-level translation from 0.9V to 5.5V. It supports standard and fast mode I2C, extends bus capacitance up to 400 pF, and features ESD protection. Ideal for servers, routers, and industrial equipment.
SN75DP159RSBR DisplayPort to HDMI Retimer 6 Gbps 40-Pin WQFN
Dual-mode DisplayPort to HDMI 2.0a retimer supporting up to 6 Gbps per lane for Ultra HD 4K video. Features adaptive equalization, CDR, and I2C programmability. Low power consumption at 435 mW active. Available in 40-pin WQFN package. Ideal for notebooks, docking stations, and AV equipment.
SN75176BDR RS-485 RS-422 Differential Bus Transceiver IC 5V 60mA SOIC-8
Bidirectional transceiver IC for multipoint data communication on long bus lines. Meets TIA/EIA-422-B and 485-A standards. Features 60mA driver output, ±200mV receiver sensitivity, thermal shutdown, and 3-state outputs. Operates from single 5V supply. Ideal for industrial motor controls, HMI, and telecom applications.
MAX3386ECPWR RS-232 Interface IC 3V 25kV ESD Protection TSSOP
The MAX3386ECPWR is a 3-driver, 2-receiver RS-232 interface IC with ±15kV ESD protection. It operates at 250 kbps from a 3.3V supply using four 0.1μF capacitors. Features a VL pin for mixed-logic voltage systems. Ideal for handheld devices, PDAs, and battery-powered equipment.
MAX3243ECDBR RS-232 Interface IC 3-5.5V MultiChannel Line Driver Receiver 500kbps
Single-chip RS-232 interface IC operating from 3V to 5.5V supply. Features ±15kV ESD protection, 500kbps data rate, and ultra-low 1μA standby current. Ideal for battery-powered systems, notebooks, and handheld equipment.
MAX232DWR RS-232 Interface IC Dual Driver Receiver 5V 120 kbit/s SOIC-16
Dual RS-232 driver/receiver IC operating from a single 5V supply. Supports up to 120 kbit/s data rate with ±30V input tolerance. Features low 8 mA typical supply current and ESD protection. Ideal for battery-powered systems, terminals, and modems.
SN65HVD231DR CAN Transceiver IC 3.3V 1Mbps UART Interface Sleep Mode SOP-8
High-input impedance CAN transceiver IC supporting up to 120 nodes per bus. Operates at 3.3V with data rates up to 1 Mbps. Features ±16 kV HBM ESD protection, adjustable driver transition times, and low-power sleep mode. Ideal for industrial automation, motor control, and HVAC systems.
SN65HVD485EDR RS-485 Transceiver Half Duplex 10 Mbps Serial Converter Chip
Half-duplex RS-485 transceiver with 10 Mbps data rate, 5V supply, and low current draw. Supports up to 64 nodes, features bus-open-failsafe, ESD protection, and thermal shutdown. Ideal for industrial automation, motor control, and telecom equipment.
PCA9538PWR 8-Bit I2C SMBus I/O Expander 2.3V to 5.5V TSSOP-16
The PCA9538PWR is a low-power 8-bit I/O expander with I2C/SMBus interface, operating from 2.3V to 5.5V. Features 1μA standby current, open-drain interrupt, and 5V-tolerant I/O. Ideal for remote GPIO expansion in industrial and embedded systems.
PC16552DVX/NOPB Dual UART IC with 16-Byte FIFO for Bluetooth and Serial Communication
The PC16552DVX/NOPB is a dual UART IC with independent serial channels and 16-byte FIFO buffers, reducing CPU overhead. It supports programmable baud rates, DMA signaling, and MODEM control. Ideal for Bluetooth and industrial serial applications, it offers reliable data transfer and error detection.
GD75232PWR RS-232 Interface IC UART 3 Driver 5 Receiver 120 kbit/s TSSOP-20
Combines 3 drivers and 5 receivers for RS-232 communication. Supports data rates up to 120 kbit/s. Compliant with TIA/EIA-232-F and ITU V.28 standards. Rugged bipolar design reduces board space. Ideal for UART to serial-port interconnection in PC/AT systems.
ISO3086TDWR Isolated RS-485 Transceiver 20 Mbps 4242 VPK SOIC-16
Full-duplex isolated RS-485/RS-422 transceiver with 20 Mbps signaling rate and 4242 VPK isolation. Features thermal shutdown, fail-safe receiver, and 50 kV/μs transient immunity. Ideal for factory automation and motor control. Operating temperature -40°C to 85°C.
ISO7641FMDWR UART Level Shifter IC 6kVpk Quad Channel 150Mbps Digital Isolator
High-speed quad-channel digital isolator with 150 Mbps data rate and 6kVpk isolation. Low power consumption, 7ns propagation delay, and wide temperature range. Certified to UL, VDE, CSA, TUV, and CQC standards. Ideal for industrial fieldbus, motor control, and power supplies.