Flash Memory IC Chip
LM1117MPX-ADJ/NOPB LDO Voltage Regulator 800mA Adjustable 1.25V to 13.8V SOT-223
Low dropout voltage regulator with 1.2V dropout at 800mA. Adjustable output from 1.25V to 13.8V. Features current limiting, thermal shutdown, and ±1% accuracy. Ideal for post-regulation, battery chargers, and portable instrumentation.
LM317DCYR Adjustable Linear Voltage Regulator 1.25V to 37V 1.5A SOT-223
The LM317DCYR is a three-terminal adjustable positive voltage regulator delivering over 1.5A from 1.25V to 37V. Features include current limiting, thermal overload protection, and 0.01% line regulation. Ideal for power management in industrial and consumer electronics.
BQ24232RGTR Li-Ion Battery Charger IC 28V Input 500mA QFN-16
Highly integrated linear charger with dynamic power-path management for portable devices. Supports 25-500mA charge current, 28V input with OVP, and USB-IF compliance. Ideal for Bluetooth and low-power handheld applications.
HT7133-1 SOT89 Holtek 30V High Input Voltage Regulator 3 Pin Power Management IC
CMOS low power high voltage regulator with 30V max input, ±3% accuracy, and low dropout. Ideal for battery checkers, power failure detectors, and microcomputer reset. Available in SOT89, TO92, and SOT23 packages.
LM321MFX NOPB Low Power Operational Amplifier IC 1MHz SOT-23-5 3V to 32V
Single-channel op amp with 430 µA supply current and 1 MHz gain-bandwidth. Stable with high capacitive loads, wide 3V to 32V range. Ideal for chargers, power supplies, and industrial controls. Available in SOT-23-5 package.
AD694ARZ-REEL Mono Current Transmitter 4-20mA Amplifier IC Chip SOIC-16 Single Circuit
The AD694ARZ-REEL is a precision mono current transmitter for 4-20mA loops, ideal for industrial process control. Features precalibrated 0-2V/0-10V inputs, wide 4.5V-36V supply, open-loop alarm, and 0.002% nonlinearity. Available in SOIC-16, supports -40°C to +85°C operation.
AD620ARZ-REEL7 Low Power Instrumentation Amplifier IC 1 Circuit 8-SOIC Gain 1 to 10000
Low drift, low power, high accuracy instrumentation amplifier. Gain set from 1 to 10000 with one external resistor. Features 1.3 mA max supply current, 50 µV max offset voltage, and 0.6 µV/°C drift. Ideal for precision data acquisition, medical ECG, and battery-powered industrial applications.
AD620AN Low Power Instrumentation Amplifier IC 8-Lead PDIP Gain 1 to 10000
Low cost, high accuracy instrumentation amplifier with 1.3 mA max supply current. Features 50 μV max offset voltage, 0.6 μV/°C drift, and 120 kHz bandwidth. Ideal for weigh scales, ECG, and transducer interfaces. Available in 8-lead PDIP and SOIC packages.
AD8552ARZ Dual Rail-to-Rail Zero-Drift Amplifier IC 8-SOIC 1uV Offset
The AD8552ARZ is a dual zero-drift amplifier with rail-to-rail I/O, 1 μV offset, and 0.005 μV/°C drift. Ideal for precision sensors and medical instruments. Operates from 2.7V to 5V. No external capacitors needed. Extended temp range -40°C to +125°C.
LM2904DR2G SOP8 Single Supply Dual Operational Amplifier IC 3V to 32V Low Power
Low power dual operational amplifier IC in SOP8 package. Operates from 3V to 32V single supply. Features short circuit protection, true differential input, and low input bias current. Ideal for industrial and automotive applications. Pb-free and NCV options available.
LM258DR SOP8 Dual Channel Operational Amplifier IC 3V to 36V High Gain
Industry-standard dual op amp with wide 3V to 36V supply range, low 300 µA quiescent current, and 1.2 MHz bandwidth. Features low offset voltage, EMI filtering, and high ESD for rugged applications. Ideal for power supplies, motor control, and industrial systems.
AD8221ARZ-R7 Instrumentation Amplifier IC Gain 1-1000 MSOP-8 High CMRR 80dB
High precision instrumentation amplifier with programmable gain from 1 to 1000. Features 80dB min CMRR at 10kHz, low offset drift, and wide ±2.3V to ±18V supply range. Ideal for weigh scales, medical instrumentation, and industrial process controls.
TI Original TL072CP DIP8 Operational Amplifier IC for Motor Integrated Systems 13 V/us Slew Rate
JFET-input op amp with low noise 18 nV/√Hz, low THD 0.003%, and high slew rate 13 V/μs. Ideal for motor drives, UPS, and audio pre-amplifiers. Available in multiple packages with custom options.
ADM3485EARZ-REEL7 Half Duplex RS-485 Transceiver IC 3.3 V 12 Mbps for Power Metering
ADI original ADM3485EARZ-REEL7 half-duplex transceiver IC with ±15 kV ESD protection. Supports 12 Mbps data rate, 3.3 V operation, and up to 32 nodes. Ideal for power/energy metering, industrial control, and EMI-sensitive systems. Available in stock.
SN74HC08DR Quad 2-Input Positive-AND Gate IC 2V to 6V SOIC-14 SMD
The SN74HC08DR is a quadruple 2-input Positive-AND Gate IC in SOIC-14 package. Operates from 2V to 6V with low power consumption (20µA max ICC) and fast 8ns typical propagation delay. Drives up to 10 LSTTL loads. Green product, RoHS compliant, ideal for industrial logic applications.
SN74HC245PWR Octal Bus Transceiver 3-State Outputs TSSOP-20 12ns
High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads. Low power consumption 80µA max ICC, 12ns typical propagation delay. Green product, no Sb/Br. Ideal for industrial automation, signal processing, and communications.
CD4069 CMOS IC DIP-14 Six Inverter Circuits High Noise Immunity 3V to 15V
The UTC CD4069 is a CMOS IC featuring six inverter circuits with wide supply voltage range (3V-15V) and high noise immunity (0.45 VDD typ). Ideal for low power consumption, ESD protection, and TTL compatibility. Available in DIP-14 and SOP-14 packages.
CD4013BM96 CMOS Dual D-Type Flip Flop IC SOIC-14 16 MHz Clock Toggle Rate
The CD4013BM96 is a dual-channel D-type flip-flop IC in SOIC-14 package. Features asynchronous set-reset, static operation, and 16 MHz typical clock toggle rate at 10 V. Ideal for shift registers, counters, and toggle applications. RoHS compliant.
74HCT245D SOIC-20 8 Bit Transceiver 3 State Outputs Programmable IC Chip 2.0-6.0V
The 74HCT245D is an 8-bit transceiver with 3-state outputs, featuring output enable and direction control. Compliant with JEDEC JESD7A, it offers ESD protection up to 2000V HBM. Ideal for bidirectional bus interfaces, it operates from -40°C to +125°C with multiple package options.
NE555P Precision Timer IC DIP-8 Adjustable Duty Cycle 5V to 15V Clock Chip
The NE555P precision timer IC operates from 5V to 15V, offering adjustable duty cycle and timing from microseconds to hours. Supports astable or monostable modes with TTL-compatible output sinking or sourcing up to 200 mA. Ideal for precision timing and oscillation circuits.