Copper Based Alloys
Manganin Strip Copper Based Alloys
Resistance Manganin Strip Copper Based Alloys 0.2mm×35mm used For Shunt Resistor Manganin strip/foil BMn3-12 CuNi resistance Alloy Very good resistance to corrosion Very good malleability Very good solder ability Manganin strip/foil BMn3-12 CuNi alloy grade: Constantan, CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuMu12Ni, CuNi34, CuNi40 (6J40), CuNi44. Manganin is the electric resistance alloy with the copper nickel as the essential component. It has the low
C7521 Nickel Silver Strip Copper Alloys 0.2mm x 300mm 1/2 Hard Bright UNS.C75200
C7521 Nickel Silver Strip Size 0.2mmx300mm 1/2 Hard Brigt UNS.C75200 Same Name GB: Bzn18-18 UNS C752000 EN CuNi18Zn20 JIS C7521 Nickel Silver Alloys, also called Copper - Nickel - Zinc alloys, 65 - 18 - 18 respectively.which has good formability, good corrosion and tarnish - resistance performance, and this alloy has the pleasing silver - like color. Chemical Composition Cu% 62~66 Ni%6.5~19.5 Zn% Re Mechanical properties Mechanical properties State Hardness HV Tension test
Strain Gauge Copper Nickel Alloys , Precision Resistance Constantan Foil 0.005 x 100 mm
Strain Gauge Copper Nickel Alloys , Precision Resistance Constantan Foil 0.005 x 100 mm OhmAlloy49(Resistance heating wire and resistance wire) (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) Grade: Constantan Resistance Alloy (Ohmalloy49) Chemical Composition: Ni:44% Cu: Rest% Max. continuous service temp. of element(C) :400degrees Resistivity at 20C(μΩm)
Bright Nickel Silver Strip C7701 C7521 Copper Nickel Zinc Alloy Strip
Bright Nickel Silver Strip C7701 C7521 Copper Nickel Zinc Alloy Strip Copper-Nickel-Zinc alloy, also called nickel silver, German silver, new silver, nickel brass, albata, or electrum, is a copper alloy with nickel and often zinc. Nickel silver is named for its silvery appearance, but it contains no elemental silver unless plated. Features: 1) Good color 2) High toughness 3) High strength 4) High stability 5) Excellent elasticity with fine silver gloss 6) Good fatigue 7) Rust
CuNi44 Resistance Strip / Foil Copper Based Alloys 0.02mm Thickness
Product Details 0.02mm thickness CuNi44(constantan) Resistance Foil,low resistance alloy CuNi44(constantan) Resistance Strip/Foil Grade: Constantan Resistance Alloy (Ohmalloy49) Chemical Composition: Ni:44% Cu: Rest% Max. continuous service temp. of element(°C) :400degrees Resistivity at 20ºC(μΩ·m):0.49 ohm mm2/m Density(g/cm3): 8.9 NiCr series: CuNi1;CuNi2;CuNi6;CuNi8;CuNi10;CuNi14;CuNi19; CuNi23;CuNi30;CuNi34;CuNi40(Constantan);Manganin Chemical Composition and Main
Nickel Silver Strip / CuNi18Zn20 / C75200 / CW409J / NS106 For Decoration
C7521(CuNi18Zn20) UNS.C75200 Nickel Silver Alloys, also called Copper - Nickel - Zinc alloys, 65 - 18 - 18 respectively.which has good formability, good corrosion and tarnish - resistance performance, and this alloy has the pleasing silver - like color. Chemical composition Articles Chemical composition GB UNS EN JIS Cu% Ni% Zn% BZn18-18 C75200 CuNi18Zn20 C7521 62-66 16.5-19.5 Rem Physical properties,fabrication properties Physical properties fabrication properties density g
0.01mm Copper Based Alloys CuMn12Ni4 Manganin Foil For Resistance Shunt
6J13 Foil thickness 0.01mm CuMn12Ni4 Manganin foil for Precision Resistance Shunt (Common Name: Manganin 43,CuMn12Ni4,Manganin ) Shunt Manganin 43 is a copper-manganese-nickel alloy (CuMnNi alloy) for use at room temperature. The alloy is characterized by very low thermal electromotive force (emf) compared to copper. Shunt Manganin43 widely used for Shunt resistor with the highest requirements, shunt manganin43 has been used in precision built electrical components such as
XHM(TM06) /XHMS(TM08) Harden Copper alloy Strip Beryllium Copper Tape C17200 QBe2 Strip
XHM(TM06) /XHMS(TM08) Harden Copper alloy Strip Beryllium Copper Tape C17200 QBe2 Strip Ohmalloy Material Co.,Ltd is the leader in the manufacture of beryllium-copper alloys. We actively participate in all environmental studies made on all substances used in our products. Our priority is to comply with all legal regulations in force to ensure the continued existence of our products to our clients. Beryllium-Copper-alloys are mainly based on copper with a beryllium addition.
Beryllium Copper Based Alloys C17200 Medical Apparatus Cell Phone Shielding Case Material
C17200 Beryllium Copper Becu Strip / Bar Beryllium copper is a supersaturated solid solution copper-based alloy, a copper alloy with bismuth as the main alloying element, also known as beryllium bronze. Features:Beryllium copper is an alloy with good mechanical, physical and chemical properties. After quenching, it has high strength, elasticity, wear resistance, fatigue resistance and heat resistance, with feature of high conductivity,thermal conductivity, cold resistance and
CuNi2 / CuNi6 / CuNi10 Copper Based Alloys 25% Elongation High Resistance Wire
CuNi40 Constantan Copper Based Alloys 25% Elongation High Resistance Wire OhmAlloy49(Resistance heating wire and resistance wire) (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) OhmAlloy49 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures
36 × 0.193 mm 420Mpa Copper Based Alloys CuNi10 Wire For Heating Mat
36 × 0.193 mm 420Mpa Copper Based Alloys CuNi10 Wire For Heating Mat OhmAlloy15(Resistance heating wire and resistance wire) (Common Name:CuNi10,Curpothal 15,NC15) OhmAlloy15 is a copper-nickel alloy (Cu90Ni10 alloy) with low resistivity for use at temperatures up to 250C. Curpothal 15 is typically used for applications such as heating cables, fuses, shunts, resistors and various types of controllers. Normal composition% Nickel 10 Manganese - Copper Bal. Typical Mechanical
Low Voltage Copper Alloys Constantan Ribbon / Flat Wire 8.9 g / cm3 Density
Low Voltage Copper Alloys Constantan Ribbon / Flat Wire 8.9 g / cm3 Density OhmAlloy49(Resistance heating wire and resistance wire) (Common Name:CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,constantan.) Grade: Constantan Resistance Alloy (Ohmalloy49) Chemical Composition: Ni:44% Cu: Rest% Max. continuous service temp. of element(°C) :400degrees Resistivity at 20ºC(μΩ·m):0.49 ohm
C7541 Copper Based Alloys 1.5mm Copper Nickel Alloy Wire
1.5mm Copper Nickel alloy wire Bzn 15-20 wire/ Nickel Silver wire/Germany Silver wire/C7541 wire nickel silver alloy wire C7541 Grade:C7541 C7521 C7701 Form: sheet / plate / strip / bar / rod / wire Cu-Ni-Zn alloy Excellent corrosion resistance good mechanical strength Parameter for Nickel Silver Strips/Copper Nickel Zinc Wires: Alloy No. Chemical Composition Cu Mn Ni Zn C7521 62.0-66 0-0.5 16.5-19.5 Remainder C7541 60.0-64 0-0.5 12.5-15.5 Remainder C7701 54.0-58 0-0.5 16.5
CuNi44 Constantan Strip Copper Nickel Alloy For Resistor
0.08*0.8mm Constantan flat wire/Copper Nickel Ribbon /Cuprothal 294 Tape/CuNi44 Alloy Constantan( Ohmalloy 049) (Common Name: CuNi44,.Cuprothal49, Alloy 2 94, Cuprothal 294, Alloy 49, CuNi 102, Cu-Ni 44, Konstantan, Constantan.) OhmAlloy049 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 400°C Typical applications for OhmAlloy49 are temperature
0.3mmx4mm T2 C11000 Copper Based Alloys For Mobile Phone
0.3mmx4mm T2 C11000 pure copper soft strip for mobile phone Pure copper, as the name suggests, is the copper with the highest copper content, because the color purple red is also known as red copper, the main component is copper plus silver, the content is 99.5 ~ 99.95%; Main impurity elements: phosphorus, bismuth, antimony, arsenic, iron, nickel, lead, tin, sulfur, zinc, oxygen, etc. Used for making conductive equipment, high - grade copper alloy, copper - based alloy pure
ASTM B122 C7521 C75200 CuNi18Zn20 Copper Nickel Zinc Alloy Bright Surface Cold Rolling
Nickel Silver Bzn 18-18 Copper-Nickel-Zinc Alloy C7521 Rod GB Bzn18-18 Bar Product Description C7521(CuNi18Zn20) UNS.C75200 Nickel Silver Alloys, also called Copper - Nickel - Zinc alloys, 65 - 18 - 18 respectively.which has good formability, good corrosion and tarnish - resistance performance, and this alloy has the pleasing silver - like color. Chemical composition Articles Chemical composition GB UNS EN JIS Cu% Ni% Zn% BZn18-18 C75200 CuNi18Zn20 C7521 62-66 16.5-19.5 Rem
1.8mm Width C26800 Copper Alloy Wire For Electronic Connectors
1.8mm copper based alloy brass H62 /C26800 wire Yellow Brass, as it is commonly known, is among the highest zinc-containing brasses available to designers. Exhibiting a handsome yellow color associated with brasses this alloy finds use in many of the same applications as other high brasses. C2680 offers similar mechanical and physical properties to that of other brasses and is often found in applications requiring an economical copper-based alloy. Designers considering
Beryllium C17200 Copper Based Alloys DIN 2.1247 Wire For Elasticity Spring
Beryllium Copper C17200 Alloy25 CuBe2 DIN 2.1247 Wire for Elasticity Spring Material XHM State Product brief introduction Common Name: C17200, alloy25, CuBe2, QBe2.0, DIN 2.1247 CuBe2--C17200 Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness
0.25mm Bright Soft Monel 400 Wire Ni Based Alloy Anti Corrosion
0.25mm bright and soft Monel 400 wire Ni-based alloy wire Monel is a group of nickel alloys, primarily composed of nickel and copper, with small amounts of iron, manganese, carbon, and silicon. Monel have a good ability on anti-corrssion, especially can be used in seawater. Also the Monel is easy to be fabricated, it can be hot- and cold-working, machining as well as good welding ability. * OHMALLOY can make the monel 400 wire from dia 0.05mm to 8mm. The rod diameter from 8mm
CuNi44 Constantan Flat Wire High Electrical Resistance
0.08mm*0.8mm CuNi44 Constantan flat wire high electrical resistance flat wire The combination of negligible temperature coefficient and high resistivity makes the alloy particulary suitable for the winding of precision resistors. OhmAlloy049 is manufactured from electrolytic copper and pure nickel.In finer wire sizes the alloy is designated as OhmAlloy49TC(Thermocouple). OhmAlloy049 is a copper-nickel alloy (Cu56Ni44 alloy) characterized by high electrical resistance, high