Fire Testing Equipment
LOI-A Automatic Flammability Test Equipment Limited Oxygen Index Tester ASTM D 2863
LOI-A Automatic ASTM D2863 Limited Oxygen Index Tester Introduction: LOI-A Automatic ASTM D2863 Limited Oxygen Index Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion
CCT Electrical Cable ASTM E1354 Cone Calorimeter, Cone Calorimeter ASTM E1354
CCT Electrical Cable ASTM E1354 Cone Calorimeter Introduction: The CCT ASTM E1354 Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application
CCT Solid Materials Heat Testing Oxygen Consumption Calorimeter
CCT Solid Materials Heat Testing Oxygen Consumption Calorimeter Introduction: The CCT Oxygen Consumption Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter tests, and it can also be used in large heat release rate test systems such as Single Burning Item(SBI), cable burning test systems, etc.
SIT ISO 11925-2 Single Flame Source Tester for Building Products
` SIT ISO11925-2 Single Flame Source Tester Introduction: SIT ISO11925-2 Single Flame Source Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925-2 Single Flame Source Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. SIT ISO11925
Fire Resistance Construction Materials Testing Equipment ISO5660 Cone Calorimeter
CCT ISO5660 Cone Calorimeter Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Cone Calorimeter can be moved, it can be used for cone calorimeter test, and it can also be used in the large heat release rate test system such as Single Burning Item(SBI), cable burning test system, etc. Application Field: Building products; Railway
RFP ASTM E648 Floorings Critical Radiant Flux Testing ASTM E648 Tester
RFP Flooring Critical Radiant Flux Testing ASTM E648 Tester Introduction: The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent room or corridor. RFP Flooring Critical Radiant Flux Testing ASTM E648 Tester can also be used for tests to standards ASTM E648 and DIN 4102; Part 14.
LOI-A Automatic LOI Cable Testing Machine Computer Control Oxygen Concentration
Automatic Computer Control Oxygen Index Testing Machine Introduction: LOI-A Automatic Computer Control Oxygen Index Testing Machine is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous
XP-2 Computer Control ASTM D2843 Building Products Smoke Density Chamber
XP-2 ASTM D2843 Building Products Smoke Density Chamber Introduction: XP-2 ASTM D2843 Building Products Smoke Density Chamber is designed and manufactured in accordance with ASTM D2843 standard, it is mainly for building products testing. By detecting the loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during the test. Features: The test chamber is Teflon coating, to resist the corrosion of smoke
Rapid Speed Coal Calorific Value Testing Automatic Coal Calorimeter
CVT Coal Calorific Value Testing Automatic Coal Calorimeter Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; CVT Coal Calorific Value Testing Coal Calorimeter is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our CVT is designed and manufactured as per GB/T14402-2007 and ISO1716 standards, which
EN ISO 9239-1 Construction Flammability testing Flooring Radiant Panel
FRP EN ISO9239-1 Flooring Radiant Panel Tester Introduction: The ISO9239-1 Flooring Radiant Panel Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. ISO9239-1 Flooring Radiant Panel Tester measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an
ISO1716 Combustion Calorimeter for Building Products Reaction to Fire Test
CVT Building Products ISO1716 Combustion Calorimeter Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; CVT Building Products ISO1716 Combustion Calorimeter is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our CVT Building Products ISO1716 Combustion Calorimeter is designed and manufactured as
SIT Combustible Materials Edge Ignition ISO11925 Small Flame Tester
SIT ISO11925-2 Small Flame Tester Introduction: SIT ISO11925 Small Flame Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925 Small Flame Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. SIT ISO11925 Small Flame Tester also meets
Building Material Thermal Radiant Melt Drop Tester by NF P92-505
NCF BS476-4 Non-combustibility Apparatus Introduction: NCF BS476-4 Non-combustibility Apparatus is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF BS476-4 Non-combustibility Apparatus is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF BS476-4 Non-combustibility Apparatus is also comply to BS 476
BS EN 13823 Building Materials FIGRA SMOGRA Single Burning Item SBI
Single Burning Item SBI Introduction: The Single Burning Item SBI is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single burning item (a sand-box burner supplied with propane). The specimen is mounted on a trolley that is positioned in a frame beneath an exhaust system. The reaction of the specimen to the burner is monitored instrumentally and visually. Heat and smoke release
XP-2 Plastic Building Material ASTM D2843 Smoke Density Test Chamber
XP-2 Plastic Building Material ASTM D2843 Smoke Density Test Chamber Introduction: XP-2 Plastic Building Material ASTM D2843 Smoke Density Test Chamber is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building products testing. By detecting the loss of light transmission in test chamber, XP-2 Plastic Building Material ASTM D2843 Smoke Density Test Chamber can measure smoke density of burning and decomposition of building material during
Perfect Design ISO5660 Building Material Heat Release Rate HHR Machine
CCT ISO5660 Heat Release Rate HHR Machine Introduction: The CCT ISO5660 Heat Release Rate HHR Machine is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT ISO5660 Heat Release Rate HHR Machine can be moved, it can be used for cone calorimeter test, and CCT ISO5660 Heat Release Rate HHR Machine can also be used in the large heat release rate test system such as Single
LOI-A Fully Automatic ASTM D 2863 Plastic Limited Oxygen Index Tester
LOI-A Fully Automatic ASTM D2863 Limited Oxygen Index Tester Introduction: LOI-A ASTM D2863 Limited Oxygen Index Tester is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion.
FPT Building Materials BS476 Part 6 Fire Propagation Tester BS476-6
Building Material BS476 Part 6 Fire Propagation Tester Introduction: Building Material BS476 Part 6 Fire Propagation Tester is for measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two
Solid Material or Liquid Petroleum Burning Calorific Value Tester
CVT Solid Material Calorific Value Tester Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; CVT Solid Material Calorific Value Tester is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our CVT Solid Material Calorific Value Tester is designed and manufactured as per GB/T14402-2007 and ISO1716
Touch Screen Automatic Calorimeter ISO1716 Oxygen Bomb Calorimeter
CVT Automatic ISO1716 Oxygen Bomb Calorimeter Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; ISO1716 Oxygen Bomb Calorimeter is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our CVT ISO1716 Oxygen Bomb Calorimeter is designed and manufactured as per GB/T14402-2007 and ISO1716 standards, which