Fire Testing Equipment
High Quality NF P92-503 Electrical Burner Test Equipment
NF P92-503 Electrical Burner Test Equipment Brief Introduction: The NF P92-503 Electrical Burner Test Equipment, in accordance with NF P 92-503, is designed to measure the fire retardant level and reaction to fire of flexible materials such as drapes, curtains, tight fitting decorative fabrics or wall covering. And also measure the burning behavior of materials which is possible to make an essential contribution to preventative fire safety and reduce the risk of fire in
GWT Plastic Glow Wire Tester, Insulating Material Glow Wire Test Chamber
Insulating Material Glow Wire Tester ---- Model GWT Introduction: Electrical components or parts may reach very high temperature or even light the material nearby under failure or overload condition. Glow wire testing simulates thermal stress caused by glowing elements or overloaded resistors in short time, to evaluate the risk of fire. Glow wire test applies to electrical and electronic products, household appliance parts, plastic and non-metallic parts of insulating
HFT Polymeric Materials ASTM D5132 HFT Horizontal Fire Tester
HFT ASTM D5132 Polymeric Materials Horizontal Burning Rate Tester Introduction: EC Directive 95/28/EC relates to the burning behavior of materials used in the interior construction of certain categories of motor vehicles, and is intended to ensure that they meet fire safety standards. 95/28/EC fire test to interior material of motor vehicle to determine the Characteristic of Burning: Horizontal Burning Behavior, Vertical Burning Behavior and Burning Dropping. It can be used
SIT Hot Sale Building Material En ISO11925-2 Ignitability Tester
Hot Sale Building Material En ISO11925-2 Ignitability Tester Introduction: Hot Sale Building Material En ISO11925-2 Ignitability Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The tester also
SIT Single Flame Source Test Ignitability Apparatus En ISO 11925-2 DIN 53438
Sit Single Flame Source Test Ignitability Apparatus En ISO 11925-2 DIN 53438 Introduction: ISO 11925-2 Standard Ignitability Apparatus is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The tester also
NF P92-505 Flame Test Equipment Thermal Radiation Dripping Test Apparatus for Melting Materials
NF505 Flame Test Equipment Thermal Radiation Dripping Test Apparatus Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in
Building Material Thermal Radiant Melt Drop Tester by NF P92-505
Building Material Thermal Radiant Melt Drop Tester by NF P92-505 Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in order
NF P92-505 Fire Test Dripping Tester to Building Material
NF P92-505 Fire Test Dripping Tester to Building Material Introduction: The Dripping Tester, in accordance with NF P92-505/ECE R118, is used to determine the melting behaviour of materials under a 500W radiant heat source. Working Principle: During the NF P92-505 test, a specimen is placed horizontal and exposed to an electric radiator above. A receptacle is positioned under the specimen to collect the resultant drops. Some cotton wool is put in the receptacle in order to
Ncf Non Combustible Building Material Flammability Test ISO 1182 and BS476-4 Test Machine
Ncf Non Combustible Building Material Flammability Test ISO 1182 and BS476-4 Test Machine NCF Non Combustion Test Equipment is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF Non Combustion Test Equipment is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF Non Combustion Test Equipment is also
Ncf BS 8414 Building Material Smoldering Combustion Test Furnace
Ncf BS 8414 Building Material Smoldering Combustion Test Furnace Ncf BS 8414 Building Material Smoldering Combustion Tester is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. Ncf BS 8414 Building Material Smoldering Combustion Tester is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. Ncf BS 8414 Building
NCF PC Control ISO 1182 Non Combustion Test Equipment for Construction Materials
Ncf PC Control ISO 1182 Non Combustion Test Equipment for Construction Materials NCF Non Combustion Test Equipment is designed and manufactured in accordance with EN ISO1182 standard , it is mainly for building products testing. NCF Non Combustion Test Equipment is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials. NCF Non Combustion Test Equipment is also comply to BS
SBI Building Materials Flame Retardant Properties Testing Sbi En13823 Tester
SBI Building Materials Flame Retardant Properties Testing Sbi En13823 Tester Introduction: The Single Burning Item (SBI) is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single burning item (a sand-box burner supplied with propane). The specimen is mounted on a trolley that is positioned in a frame beneath an exhaust system. The reaction of the specimen to the burner is
LOI-A ASTM D 2863, ISO 4589-2 Limited Oxygen Index LOI Analyzer
LOI-A ASTM D2863, ISO4589-2 Limited Oxygen Index LOI Analyzer Introduction: LOI-A LOI Analyzer is designed to test combustibility by oxygen concentration, letting user know minimum oxygen concentration as necessary for combustion. The working principle is: Place the specimen into the testing chimney, filling with oxygen and nitrogen into the chimney, ignite the specimen, then measure the min concentration of oxygen to support continuous combustion. Standards: ASTM: ASTM D2863
CCT High Quality ISO5660 ASTM E1354 Horizontal Cone Calorimeter
ISO5660 ASTM E1354 Horizontal Cone Calorimeter ---- Model CCT Introduction: The CCT Horizontal Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Horizontal Cone Calorimeter can be moved, it can be used for cone calorimeter test, and CCT Horizontal Cone Calorimeter can also be used in the large heat release rate test system such as Single Burning Item
SDB ISO5659 ASTM E662 Plastic Nbs Smoke Optical Density Tester
SDB ISO5659 ASTM E662 Nbs Smoke Optical Density Tester Introduction: The SDB ISO5659 ASTM E662 Nbs Smoke Optical Density Tester has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. SDB ISO5659 ASTM E662 Nbs Smoke Optical Density Tester is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions. It is also used for the
Sbi BS En13823 Single Burning Item for Flame Retardant Testing
SBI BS En13823 Single Burning Item for Flame Retardant Testing Introduction: The Single Burning Item (SBI) is a method of test for determining the reaction to fire behavior of building products (excluding floorings) when exposed to the thermal attack by a single burning item (a sand-box burner supplied with propane). The specimen is mounted on a trolley that is positioned in a frame beneath an exhaust system. The reaction of the specimen to the burner is monitored instrumenta
ISO1716 ASTM D5856 ISO18125 Biomass Oxygen Bomb Calorimeter Coal Calorific Value Tester
CVT Biomass Oxygen Bomb Calorimeter Coal Calorific Value Tester Introduction: Gross heat of combustion of materials is an important parameter to evaluate building materials heat release and fire base data; CVT Building Material Calorific Value Testing ISO1716 Tester is the most common device for measuring the heat of combustion or calorific value of material by putting the specimen into the oxygen cell. Our CVT is designed and manufactured as per GB/T14402-2007 and ISO1716
FPT BS476 Part 6 Fire Propagation Index BS476-6 Test Apparatus
FPT BS476 Part 6 Fire Propagation Index BS476-6 Test Apparatus Introduction: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater was adjusted
SIT En ISO11925-2 Direct Single Flame Source Testing Flammability Tester
`SIT En ISO11925-2 Direct Single Flame Source Testing Flammability Tester Introduction: SIT Direct Single Flame Source Testing Flammability Tester is designed and manufactured by DIN 53438 & ISO 11925-2 standards. SIT Direct Single Flame Source Testing Flammability Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C,
Ncf Non-Combustibility Tester En ISO1182 Vertical Tube Furnace
NCF Non-Combustibility Tester En ISO1182 Vertical Tube Furnace Introduction: NCF Non-Combustibility Tester En ISO1182 Vertical Tube Furnace is designed and manufactured in accordance with EN ISO1182 standard, it is mainly for building products testing. NCF Non-Combustibility Tester En ISO1182 Vertical Tube Furnace is mainly used in the non-combustibility test for building materials, and is suitable for classification of combustion performance of Class A fireproof materials.