CARBON PASTE
Carbon hot SIC paste/Silicon carbide furnace carbon hot paste /COLD LINING PASTE TYPE-K cold ramming paste
hot SiC paste is developed for maintenance of the Tap-hole Are to avid Oxidization. Specification: The permeability of the final product is very low, 0.1 nP. At 900-1000°C the paste gives a SiC/C material with high density and excellent mechanical strength. At 1400-1500°C the paste converts to 100% SiC. Email:[email protected]; [email protected] Skype:lin.eileen37; Website: http://www.carbonvalley.net
Carbon hot SIC paste/carbon hot paste /COLD LINING PASTE TYPE-K cold ramming paste
hot SiC paste is developed for maintenance of the Tap-hole Are to avid Oxidization. Specification: The permeability of the final product is very low, 0.1 nP. At 900-1000°C the paste gives a SiC/C material with high density and excellent mechanical strength. At 1400-1500°C the paste converts to 100% SiC. Email:[email protected]; [email protected] Skype:lin.eileen37; Website: http://www.carbonvalley.net
carbon hot paste /COLD LINING PASTE TYPE-K cold ramming paste
Cold ramming paste, also known as thick and thin seam paste, is made of calcining anthracite, graphite powder and metallurgical coke at high temperature as the main raw materials, with the addition of coal pitch and coal tar as the binder, used as the bottom of the furnace coal ramming layer, filling the gap between the carbon block products. Use of Cold Lining Paste Type-K provides a monolithic carbon lining. The paste is easy to install. Installation has been simplified and