Cable Testing Equipment
Wire Core Circular Insulation Cable Testing Equipment Cold Bend Test Machine
IEC60540 Wire Core Circular Insulation Cable Testing Equipment Cold Bending Test Machine Product information: This test conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the
IEC540 Standard Low Temperature Test Chamber 0.70C～1.00C Cooling Rate
Low Temperature Test Chamber Product information: The low temperature test chamber conforms to IEC540 standard which is applicable for the low temperature test of the electric wire and electrical accessories. Technical parameters: 1, Using temperature range:-10℃ ～ -70℃ 2, Temperature uniformity:≤2℃ 3, Cooling time:≤50 minutes(empty case) 4, Cooling rate:0.70C～1.00C 5, External dimension:1230X680X930MM 6, Internal dimension:150 litre 7, Power supply:220V±5%,50Hz 8, Input power
PVC Wire / Cable Testing Equipment Winding Test Apparatus GB/T2951.31.9-2008
PVC Wire / Cable Cracking Resistance Winding Test Apparatus GB/T2951.31.9-2008 Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. It is the auxiliary means for the split test. It is also used for the winding test of the soft wire of other industries. Technical parameters: 1, Maximum diameter of coiling:
100MΩ / 200MΩ Cable Testing Equipment Multifunctional Tester For Plug Cords
100MΩ / 200MΩ Cable Testing Equipment Multifunctional Tester For Plug Cords Product information: This test device is a multifunctional tester for plug cords or power cables. It is used for a comprehensive test of electrical characteristics including the performance of breakover, polarity, insulation resistance; withstand voltage, copper exposed or electric leakage of the shuck and so on. The operation is easy and the testing speed is fast(900～1500 lines can be tested per hour
Anti - Interference Cable Testing Equipment For Spark / Ignition Spark Test
Wire Cable Spark Tester , Electrical Wire Spark Tester Product information: Wire Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of electric wire and cable. These series of testers have good humidity resistance and Strong ability of anti-interference. Thus to make sure the transformer can work reliably for a long term in the
220V Oxygen Air Bomb Aging Test Chamber With Intelligent Control GB/T2951.12-2008
220V Oxygen Air Bomb Aging Test Chamber With Intelligent Control GB/T2951.12-2008 Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 and GB/T5013－2008 as well as VDE. It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber ( plastic,artificial leather) as well as other high polymer materials under the action of required pressure and temperature in the medium of oxygen and compressed
IEC61032 IEC60529 IEC60335 IEC61029 Electric Shock Test Probe B IP2X
IEC61032 IEC60529 IEC60335 IEC61029 Electric Shock Test Probe B IP2X Bending test IEC61032 IEC60529 IEC60335 (Test probe B) is the necessary implement in protection against electric shock test for household and other have similar matter electrical appliances This is the “International” test finger required by most IEC61032 test probe B, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements with integral palm simulator.
UL Test Probes
UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of persons and equipment by enclosure – Probes for verification Applications: To verify protection of persons against access to hazardous live parts or hazardous mechanical parts To verify protection of equipment against ingress of solid foreign objects parts To verify protection of persons against
Cord Anchorage Tester for IEC 60335-1 Clause 25.15 and IEC 62368-AnnexG.7.3.2.1 with 20N and 30N Pull Weight
Cord Anchorage Tester IEC 60335-1 Clause 25.15 / IEC 62368-AnnexG.7.3.2.1 The test machine is based on IEC 60601-1, IEC 62368-1, and IEC 60335-1 standards. It is designed for testing washing machines and other household appliances to assess the solidity of power cord clamping devices. The machine performs both tension and torque tests, featuring easy operation, a reasonable structure, and an attractive appearance. Technical Parameters Working power: AC220V 50/60HZ Tension:
IEC 60335-2-64 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 56 Mm
IEC 60335-2-64 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 56 Mm Parameter: 1,Jointed Finger Length:120mm(30/30/60mm); 2,Dam-board Diameter:56mm; 3,Standard:IEC60335-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14
IEC 60601-1- Clause 15.5.2 Dielectric Strength , Transformer Induction Withstand Voltage Tester
IEC 60601-1- clause 15.5.2 Dielectric strength , Transformer Induction Withstand Voltage Tester Technical parameters: Output voltage: 100V~3000Vac Accuracy ± (1%+1V) Test current: 0.1mA~150.0mA Output power: 450VA Test time: 0,0.3~999.9s Accuracy: ± (0.5%+50ms) Output frequency: 40.0Hz~600.0Hz TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performanc
IEC 60601-1 Hand Transmitted Vibration Meter with 100mV/g Sensor Sensitivity and 0.5Hz ~ 400Hz Frequency Range
IEC 60601-1 Hand Transmitted Vibration Meter With 100mV/g Sensor Sensitivity Product Overview Professional IEC 60601-1 compliant hand-transmitted vibration meter designed for medical electrical equipment testing and measurement applications. Technical Specifications Compliance: IEC 60601-1 clause 9.6.3 Channels: 3 Frequency Range: 0.5Hz ~ 400Hz Measuring Range: 60 dB ~ 180 dB Sensor Weight: 300g Sensor Sensitivity: 100mV/g Frequency Options: Line, Wd, Wk, Wm, Wh, VLz, Wb, Wc,
4mm Diameter IEC 60601-1-Test Rod for Electrical Safety Testing
IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and frequency Supply: 1 phase
IEC 60601-1-Unjointed Test Finger with 80mm Length Insulated Portion
IEC 60601-1-Figure 6 Unjointed test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power
Test probe,IEC 60601-2-3-Figure 201. 102- Test probe
IEC 60601-2-3-Figure 201. 102- Test probe
IEC 60601-1 Figure 6 Standard test finger
IEC 60601-1-Figure 6 Standard test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and
CSA C22.2 No. 178-20 Figure 3 Steel Test Probe Calibration Certificate
CSA C22.2 No. 178-20, Figure 3 steel test probe
EN 60335-2-30 60mm Test Rod IEC 60335-2-30 Clause 11 75mm With Hemispherical End
EN 60335-2-30 60mm 60mm Test Rod: Probe diameter:60mm Probe length: 80mm Material: stainless steel Hollow with wall thickness of 5 – 10 mm IEC 60335-2-30 Clause 11 75mm Test Rod Probe diameter:75mm Probe length: 80mm Baffle plate diameter:95mm Baffle plate thickness:10mm Handle:Φ20mm *80mm
Omega Insulated Thermocouple Wire Surface Temperature Measuring Probe IEC 60335-2
Surface Temperature Measuring Probe with Omega insulated thermocouple wire Standard: IEC 60335-2-9,IEC 60335-2-14 Parameters: Key A adhesive B thermocouple wires 0,3 mm diameter to IEC 60584-1 Type K (chrome alumel) C handle arrangement permitting a contact force of 4 N ± 1 N D polycarbonate tube: inside diameter 3 mm, outside diameter 5 mm E flat tinned copper disc: 5 mm diameter, 0,5 mm thick Packing:
IEC 60335-2-90 Test Rod for Door Interlock Concealment with 100mm Probe Length 3mm Diameter and M6 Thread Connection
IEC 60335-2-90 Test Rod for Door Interlock Concealment Product Overview IEC 60335-2-90-Figure101 Test rod designed for door interlock concealment testing applications. Technical Specifications Probe Length: 100±0.2mm Probe Diameter: 3 mm Handle Length: 20 mm Handle Diameter: 10 mm M6 thread at the tail for connecting push-pull force gauge Packaging and Shipping Secure packaging in aluminium and carton boxes to ensure product arrives intact and undamaged Shipping via DHL,