Cable Testing Equipment
IEC60335-2-24 Clause 21.102 White Lamp Test Probe For Protection Test On The Lamps
IEC60335-2-24 Clause 21.102 White Lamp Test Probe for Protection Test on the Lamps Product information: This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for protection test on the lamps of household appliances. Test method: Use this sphere probe with diameter 75±0.5㎜ to touch the lamp which is equipped with a lampshade with inconspicuous force. The sphere probe should not be able to touch the lamp.
UL749 Figure 3 Knife Probe for Dishwasher Protective Testing
UL749 Figure 3 Knife Probe for Dishwasher Protective Testing Product details: It conforms to standard requirement of UL749 Fig 3. It is a dedicated instrument for household dishwasher protective testing. It is an essential test instrument to detect the safety performance of the relevant household appliance. The handle is made of Nylon and the probe is made of stainless steel. Standard:UL749 Fig 3 Application: It is a dedicated instrument for household dishwasher protective
UL Standard Articulated Jointed Test Finger Probe For Preventing The Finger From Approaching To The Hazardous Parts
UL Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL Articulated Finger Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. 1, According to : UL507 (PA100A), UL1017 figure 2, figure 6.5 UL1062, UL982 figure 7.1 and figure 1.2 UL474 figure 5.1 and figure 14, UL60065 UL6500 figure 14, Figure 7.2 and
UL 310 Table 3 ( Ninth Edition ) Test Tab For Safety For Electrical Quick - Connect Terminals
UL Standard for Safety for Electrical Quick-Connect Terminals, UL 310 Ninth Edition 5.2.2 Test tab 5.2.2.1 Test tabs for the insertion-withdrawal test described in Clause 6.4 shall be made of unplated brass, identified as CDA C26000 Alloy with a hardness of 62 ±7 on the Rockwell 30T scale. 5.2.2.2 Test tabs for the temperature and current cycling tests described in Clause 6.5 shall be made of tin-plated steel or corrosion resistant steel having a hardness of 68 ±5 on the
ISO 6533 Clause 7 Figure 3 / 4 / 5 For Testing Forestry Machinery Portable Chain - Saw Front Hand - Guard
ISO 6533 Figure 3 / 4 / 5 for Testing Forestry machinery Portable chain-saw front hand-guard 6.2 When the machine is designed in such a way that a type A gauge of 100 mm length cannot be inserted between the handle and the housing, and X0 cannot be determined using such a gauge, the gauge length can be shortened (though no more than necessary). Using this modified gauge, X0 shall be determined according to all other requirements of 6.1. 6.3 If no contact between the gauge,
ISO 6533 Gauge A B C For Testing Forestry Machinery Portable Chain - Saw Front Handguard
ISO 6533 Gauge A B C for Testing Forestry machinery Portable chain-saw front handguard General The dimensions of the front hand-guard and the clearances shall be in relation to the intended position of the left hand on the front handle during vertical cutting (bucking), determined using defined gauges (see Clause 5). Unless otherwise specified, the following is applicable when determining the dimensions and clearances. a) The chain-saw shall be kept in the upright position;
IEC60245-1 Clause 3.2 Static Flexibility Tester For Arc - Welding Electrode Cables And Lift Cables
Static Flexibility Tester For Checking Mechanical Strength of Completed Flexible Cables / Rubber Insulated Cables Product Introduction: This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking mechanical strength of completed flexible cables. This test
Wedge Probe For Testing Document Shredders
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The KP1105 is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The other probe now required in the standard is UL Articulated Finger Probe, Model
6 Groups Cable Testing Equipment For Plug Static Pull Test UL / IEC Standard
6 Groups Cable Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1. Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2. Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal and power cord.The tester can test 6pcs
GB3048 General Conductor Resistance Test Device High Accuracy Kingpo
GB3048 General Conductor Resistance Test Device Product information: This device is the special appliance used for measuring the conductor resistance. It is applicable not only for the electrical wire whose length is 1 meter, but also the length of thousands meters. The design principle and the measurement accuracy completely conform to the standard requirement of GB3048. Technical parameters: 1) Power supply:AC 220V 50Hz； 2) Resistance measurement range:0.001mΩ～20kΩ 3)
Electric Wire Abrasion Test Apparatus For Rubber Insulated Cables
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of IEC245-4. It is used for the abrasion test of the rubber insulated cables ( the power cables of the residential luminaire, household appliances such as electric cooker, electric kettle, electric iron.) Technical parameters: 1, Working power supply:AC220V 50Hz 2, Fixed shaft diameter:Φ40±0.3mm 3, Test rate:single trip 40±1 times
IEC60335-1 Stability Test Turn Table With Digital Inclinometer / Inclined Plane Device
IEC60335-1 Stability Test Turn Table With Digital Inclinometer / Inclined Plane Device Product information: This device is designed and manufactured in accordance with the IEC60335-1 clause 20.1.It is used to test the stability of an apparatus that requires a surface in order to work. The device consists of a surface and an angle adjusting device, with angles 0～15°adjustable. The appliance is placed in any normal position of use on a plane inclined at an angle of 10° to the
Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product
Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product Product information: The temperature measurement corner conforms to the standard requirement of IEC60950-1 : 2005. It is designed and manufactured to provide the required environment for the temperature rising test of all kinds of electrical, electrical products. It can be customized according to the different testing samples. The Black Test Corner for temperature measurement is conformed
IEC62262 Mechanical Strength Tester On Sheet Metal / Pendulum Impact Test Apparatus For Energy Impact Test
IEC62262 Mechanical Strength Tester On Sheet Metal / Pendulum Impact Test Apparatus For Energy Impact Test Product details: This testing device conforms to IEC62262. It is used for the mechanical strength test of the sheet metal like the substation ark and the metalloid electric energy metering cubicle. The mounting bracket and the angle of impact are adjustable. This device is for the energy impact test (the energy is more than 2J). Technical parameters: Pendulum: Length:
UL486 Rotary Tensile Strength Test On Clamping Screw Terminal For Checking Damage Degree Of Wire
UL486 Rotary Tensile Strength Test On Clamping Screw Terminal For Checking Damage Degree of Wire Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to UL486 standard. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw
IEC 60884-1 Figure 8 Arrangement For Compression Test Of 24.5 / 300N Manual Compression Test Apparatus
IEC 60884-1 Figure 8 Arrangement for Compression Test of 24.5 / 300N Manual Compression Test Apparatus Product details: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N. The specimens are first placed in position a), as shown in figure 8, and the force is applied for 1 min. They are then placed in position b), as shown in figure 8,
Electric Drive High Temperature Oil Bath for Cable Testing Equipment with 500×400×400MM Volume and 220V,9A Power
Electric Drive High Temperature Oil Bath For Wire Industry 500*400*400MM Cable Testing Equipment Thermostatic Control Oil Bath For Wire Industry Quick Details Alternative name High temperature oil bath Function Test capability of cables under high constant temperature Feature Electric drive Weight 87kg Volume 500*400*400(MM) Test standard JIS-C-3005 Equipment Description The constant temperature oil bath is used for testing properties of insulating materials of cable and
High Accuracy Plug Flexing Tester With Touch Screen / Alarm
Chapter one: introduction of the instrument 1.1 Characters and main use This tester is used to perform the fatigue test on the AC and DC power cord and power cords lead. This is the necessary equipment for the QC department and Lab of the related industry. The rotating speed and rotating angle can be preset freely, and it will alarm once the specimen was damaged, it has many good features, such as: high accuracy, stable, and high efficiency, which is a perfect tester for
15mm Length IEC 60601-1- Test Pin for Medical Equipment Testing
IEC 60601-1-Test Pin According to IEC 60601-1-figure 8 TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and frequency Supply: 1 phase and 3 phase variacs R 5.3 Ambient temperature,
IEC 60601-1 Figure 7 Test Hook with 8mm Width and 1mm Thickness
IEC 60601-1-figure 7 Test Hook TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and frequency Supply: 1 phase and 3 phase variacs R 5.3 Ambient temperature, humidity, atmospheric pressure