500A UL94-V0 Open Loop Hall Effect Current Sensor Black Hall Effect Current Transformer
The TKC-TG3 series open loop Hall effect current sensor provides accurate measurement of DC, AC, or pulsed currents from 20A to 500A. Features UL94-V0 flame retardant rating, galvanic isolation up to 2.5KV, and wide operating temperature range from -40°C to +125°C. Ideal for variable speed drives, UPS, and welding machines.
20-500A UL94-V0 Open Loop Programming Hall Effect Current Transformer
Standards
- UL94-V0.
- EN60947-1:2004
- IEC60950-1:2001
- EN50178:1998
- SJ 20790-2000
Characteristics chart
The TKC-TG3 series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of 3 phase DC, AC or pulsed currents.
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +125 | ºC | TA |
| Storage temperature | -40 to+150 | ºC | TS |
| Mass(approx) | 99 | g | M |
| Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
|
Type |
TKC 20TG352 |
TKC 50TG352 |
TKC 100TG352 |
TKC 200TG352 |
TKC 300TG352 |
TKC 400TG352 |
TKC 500TG352 |
Unit |
|
Rated current(Ipn) |
±20 | ±50 | ±100 | ±200 | ±300 | ±400 | ±500 | A |
|
Measuring range(Ip) |
±22 | ±55 | ±110 | ±220 | ±330 | ±440 | ±550 | A |
| Rated output | @Ip=±Ipn ±2±1% | V | ||||||
| Supply voltage | +5 ±5% | V | ||||||
|
Power Consumption |
≤15 | mA | ||||||
|
Offset voltage |
≤±20 | mV | ||||||
|
Magnetic offset |
±15 | mV | ||||||
|
Offset drift |
@ -40～+85℃ ≤±2.0 | mV/℃ | ||||||
| output drift | ±1.0 | mV/℃ | ||||||
|
Linearity |
@Ip=0-±Ipn ≤1 | %FS | ||||||
|
Response time |
@50A/μS, 10%-90% ≤8 | μS | ||||||
| Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | ||||||
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)Electrochemical
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use
Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
The primary conductor should be≤120℃.
The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
Characteristics chart
Recommended Products
