Open Loop Hall Effect Current Sensor 1000-20000A for Frequency Converter AC Measurement
Non-contact open loop hall sensor for AC/DC current measurement from 1000A to 20000A. Features galvanic isolation, ±15V supply, fast response ≤10μs, and high linearity ≤1%FS. Ideal for variable speed drives, UPS, and welding machines. UL94-V0 certified.
1000-20000A Open Loop Hall Effect Current Sensor For Frequency Converter
A hall effect current sensor allows non-contact detection of direct and alternating currents, using a hall element, a magnet-electric converting element. This minimizes power loss of the target current circuit and has a simple structure with high reliability.
Characteristics chart
The TKC-HB series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
| Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
|
Type |
TKC 1000HB |
TKC 2000HB |
TKC 3000HB |
TKC 5000HB |
TKC 8000HB |
TKC 15000HB |
TKC 20000HB |
Unit |
|
Rated current(Ipn) |
±1000 | ±2000 | ±3000 | ±5000 | ±8000 | ±10000 | ±20000 | A |
|
Measuring range(Ip) |
±2000 | ±6000 | ±9000 | ±10000 | ±16000 | ±20000 | ±30000 | A |
| Rated output | @Ip=±Ipn ±4±1% | V | ||||||
| Supply voltage | ±15 ±5% | V | ||||||
|
Power Consumption |
+45,-15 | mA | ||||||
|
Offset voltage |
@Ip=0 ±20 | mV | ||||||
|
Magnetic offset |
@Ip=±Ipn-0 ±30 | mV | ||||||
|
Offset drift |
@ -40～+85℃ ≤±0.5 | mV/℃ | ||||||
| output drift | @ -40～+85℃ ≤±0.5 | mV/℃ | ||||||
|
Linearity |
@Ip=0-±Ipn ≤1 | %FS | ||||||
|
Response time |
@50A/μS, 10%-90% ≤10 | μS | ||||||
| Galvanic isolation | @ 50HZ,AC,1min 6 | KV | ||||||
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use
Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
The primary conductor should be≤120℃.
The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
Standards
- UL94-V0.
- EN60947-1:2004
- IEC60950-1:2001
- EN50178:1998
- SJ 20790-2000
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to+125 | ºC | TS |
| Mass(approx) | 1.25 | kg | M |
Characteristics chart
Recommended Products
