Low Smoke Zero Halogen Cable
0.6/1kV Low Smoke Zero Halogen Cable CU/XLPE/LSZH ROHS CE Certified
0.6/1kV Low Smoke Zero Halogen Cable CU/XLPE/LSZH ROHS CE Certified . Application for Fire Resistive Power Cable, Fire Rated Power Cable This cable is specially designed for areas where integrity of electrical circuit is critical to maintain the power supply. Application usage can be found in:- emergency lightings, control and power circuits, fire alarm systems, communication systems, lifts and escalators, power stations, underground tunnels, sewage treatment plans, high-rise
Copper Tape Screen 0.6 / 1KV Low Smoke Zero Halogen Cable / Wire Size 1.5 - 400 SQ MM
Copper Tape Screen 0.6 / 1KV Low Smoke Zero Halogen Cable With Flame Retardant Construction Conductor:Compact stranded copper conductor, cl. 2 as per IEC 60228 Mica Tape Insulation:XLPE (cross-linked polyethylene) rated at 90℃ Filler Wrapping Tape:LSOH Bending Tape Sheath:LSOH,black or other colors, as per IEC60332,60502-1 Code Designation YJ:XLPE insulation Y:LSOH sheath Applications For laying indoors and outdoors. Able to bear certain traction during installation,but not
MultiCore 0.6 / 1KV Low Smoke Zero Halogen Cable 1.5 - 630 SQ MM Shanghai Shenghua
MultiCore 0.6 / 1KV Low Smoke Zero Halogen Cable 1.5 - 630 SQ MM Shanghai Shenghua Low Smoke Zero Halogen Cable The flame retardant cable is mainly featured in low liability of fire or that second combustion is only limited to a certain range, meets the IEC60332 combustion testing requirements, and is applicable to the places with flame retardant requirement. Product Category 1. Ordinary flame retardant cable: In the event of fire, the cable may produce a large amount of
N2XH IEC 60502-1 XLPE Insulation Cable FRNC 0.6/1kV LSZH Power Cable Low Corrosivity
N2XH IEC 60502-1 XLPE FRNC 0.6/1kV Cable Voltage (Uo/U) 600/1000V Product Category 1. Ordinary flame retardant cable: In the event of fire, the cable may produce a large amount of corrosive gases and smoke after combustion, and can be used in general occasions with low flame retardant requirement. Its flammability has A, B,C, D four categories, and its cable models are added with ZRA- (or ZA-), ZRB- (or ZB-), ZRC- (or ZC-), and ZRD- (or ZD-) before ordinary cable models,
Multi - Cores 0.6 / 1KV Low Smoke Zero Halogen Cable 1.5 - 400 SQ MM Flame Retardant
Muti-cores 0.6/1KV Low Smoke Zero Halogen Cable 1.5 - 400 SQ MM Low Smoke Zero Halogen Cable The flame retardant cable is mainly featured in low liability of fire or that second combustion is only limited to a certain range, meets the IEC60332 combustion testing requirements, and is applicable to the places with flame retardant requirement. Product Category 1. Ordinary flame retardant cable: In the event of fire, the cable may produce a large amount of corrosive gases and
0.6/1 KV FRC XLPE / LSHF Fire Resistant Low Smoke Halogen Free Cable
0.6/1KV FRC-XLPE/LSHF Fire Resistant Low Smoke Halogen Free Cable Scope of application: This item is applied for the alternating current circuitry with voltage (Uo/U) 0.6/1kV for the power supply. Working conditions: 1) This maximum working temperature of the conductor is 70°C. 2) During having a short(lasting less than 5 seconds)the maximum temperature of the cable conductor for shall not be above 160°C. 3) Environment temperature should be no lower than 0°C for laying the