Integrated Circuit Components
LT1792CS8 JFET Op Amp 5.6MHz 3.4V/µs Low Noise 6nV/√Hz SO-8
High precision JFET operational amplifier with ultra-low 4.2nV/√Hz voltage noise and 600µV offset. Features 5.6MHz gain bandwidth, 3.4V/µs slew rate, and 1.2 million min voltage gain. Ideal for photocurrent and hydrophone amplifiers. 100% tested, ROHS compliant, surface mount SO-8 package.
LP2951CN LDO Voltage Regulator 5V Adjustable 150mA 3V-30V Input TO-220 DIP-8
Micropower LDO regulator with 75µA quiescent current and 50mV dropout at 100µA. Offers 5V/3.3V/3.0V fixed or adjustable output from 1.25V to 29V. Features error output, shutdown, thermal protection. Ideal for battery-powered industrial equipment. RoHS compliant.
LAN8720A Ethernet PHY Transceiver 10/100Mbps RMII 3.3V -40°C to +85°C 24-QFN
Single-chip 10/100Mbps Ethernet PHY with HP Auto-MDIX and flexPWR technology. Supports RMII interface, low power modes, and 25MHz crystal. Industrial temp range. RoHS compliant 4x4mm QFN package. Ideal for embedded networking applications.
LM317D2T Adjustable Voltage Regulator 1.5A 1.2-37V Output TO-263-3 D2PAK
Positive adjustable voltage regulator delivering 1.5A output over 1.2-37V range. Features thermal shutdown, current limiting, and SOA protection. ±1% accuracy, -40°C to +125°C. Ideal for B2B industrial applications requiring reliable power management.
IRFHM9331TRPBF 30V Dual N+P MOSFET 5.3A/3.7A 0.045Ω/0.075Ω Rds(on) DFN-10 175°C AEC-Q101
IRFHM9331TRPBF is a 30V dual N+P MOSFET in a compact DFN-10 package. It features low Rds(on) of 0.045Ω/0.075Ω, high current handling up to 5.3A/3.7A, and operates at 175°C. AEC-Q101 qualified, RoHS compliant, and ideal for automotive and industrial power management applications.
IRF4905PBF P-Channel MOSFET 55V 74A TO-220AB 20mOhm Avalanche Rated
Infineon HEXFET P-Channel MOSFET with ultra-low on-resistance (20mOhm) and 175°C max junction temperature. Ideal for high-efficiency switching. 100% original, RoHS compliant, and available from stock for fast delivery.
IR2110PBF 600V High Low Side Driver 2A Peak Current 10V-20V Logic 14-DIP IC
High voltage 600V half-bridge driver for IGBT/MOSFET. Features 2A peak output, 3.3V logic compatible, undervoltage lockout, and matched propagation delays. Ideal for bootstrap operation. 100% original, ROHS compliant.
Infineon FM24CL64B-GTR 64Kb FRAM I2C 1MHz 10^14 Endurance 151yr Retention 3.6V SOIC-8
64Kb nonvolatile FRAM with 10^14 read/write cycles and 151-year data retention. I2C interface up to 1MHz, no write delays. Low power, 2.7V-3.65V operation, industrial temp range. RoHS compliant, ideal for data logging and industrial controls.
ATTINY24A-MUR 8-bit MCU 2KB Flash 128B SRAM 20MHz 12 I/O 1.8-5.5V
High-performance, low-power AVR 8-bit microcontroller with 2KB Flash, 128B SRAM, and 12 I/O pins. Features SPI, UART, 10-bit ADC, and operates at 20MHz. Industrial temp range -40°C to +85°C. Ideal for embedded control applications.
ADUM3160BRWZ 2.5kV USB Isolator 12Mbps SOIC-16 -40°C to +105°C
USB 2.0 compatible isolator with bidirectional communication, 12Mbps data rate, and 2.5kV isolation. Supports 3V-5.5V supply, high temperature operation up to 105°C, and RoHS compliance. Ideal for industrial and automotive applications.
ADT6501SRJZP085RL7 85°C Thermal Switch ±1°C Accuracy 2.7V-5.5V SOT-23-5 10μA Low Power AEC-Q100
Factory-set 85°C trip point thermal switch with ±1°C accuracy and 10μA low power consumption. Features open-drain output, pin-selectable hysteresis, and AEC-Q100 qualification. Ideal for automotive and industrial temperature monitoring. 100% original, ROHS compliant.
ADR02ARZ 5.0V Precision Voltage Reference ±0.1% Accuracy 10mA Output SOIC-8 -40°C to +125°C
High accuracy 5.0V band gap voltage reference with ±0.1% initial tolerance and 3ppm/°C typical drift. Features 10mA output, wide 7V-36V input range, and no external capacitor needed. SOIC-8 package, -40°C to +125°C. Ideal for precision industrial and automotive applications.
ADM3491ARZ 3.3V RS-485 Transceiver 10Mbps Full Duplex SOIC-14 -40C to +85C
3.3V RS-485/RS-422 transceiver with 10Mbps data rate, full duplex, and ±15kV ESD protection. Supports up to 32 nodes on bus. Ideal for industrial control, HVAC, and telecom. 100% original, ROHS compliant.
AD8052AR 300MHz Dual Op Amp 170V/µs Slew Rate Rail-to-Rail Output SOIC-8
High-speed dual voltage feedback amplifier with 110MHz bandwidth and 170V/µs slew rate. Features rail-to-rail output, low distortion, and drives 45mA load. Ideal for video, active filters, and ADC drivers. Available in SOIC-8 package, -40°C to +125°C.
AD7712ARZ 24-Bit Sigma-Delta ADC 1kSPS Low Noise SPI Interface ±5V Supply
High-precision 24-bit Σ-Δ ADC with 1kSPS output rate, low noise (1.5μV), and programmable gain. Features SPI interface, dual analog inputs, and internal/external reference. Ideal for process control and portable instruments. 100% original, ROHS compliant.
AD820AN JFET Precision Op Amp 1.8MHz Rail-to-Rail DIP-8 -40°C to +85°C
High precision JFET op amp with rail-to-rail output, 1.8MHz bandwidth, and 3V/µs slew rate. Supports single 5V to 30V or dual ±2.5V to ±15V supplies. Ideal for battery-powered instrumentation, filters, and data acquisition. 100% original, ROHS compliant.
SWPA4018S680MT 68μH Shielded Power Inductor 4x4.8mm 3.2A Saturation Current 90mΩ DCR
Magnetic-resin shielded construction reduces buzz noise. Closed magnetic circuit minimizes EMI. 30% higher current rating than conventional inductors. Operating temperature -40°C to +125°C. Ideal for smartphones, notebooks, VR, and LED lighting.
Murata LQP03TN2N7B02D 2.7nH High-Q Inductor 0201 500mA 200mOhm DCR
High-Q thick film inductor from Murata, 2.7nH ±0.1nH tolerance, 500mA rated current, 200mOhm max DCR. Ideal for RF circuits up to 10GHz. Operating temperature -55°C to +125°C. 100% original, ROHS compliant, fast delivery.
Murata NCP18XH103F03RB 10kΩ NTC Thermistor 0603 ±1% AEC-Q200
High stability NTC thermistor with 10kΩ resistance, ±1% tolerance, and 3380K B25/50. AEC-Q200 qualified, UL/cUL certified, and RoHS compliant. Ideal for temperature sensing in automotive and industrial applications. Available in tape and reel packaging.
Murata BLM31PG601SN1L 600Ω Ferrite Bead 1206 1.5A AEC-Q200 Power Line Filter
High impedance 600Ω at 100MHz ferrite bead in 1206 package. Rated 1.5A with 80mΩ DCR. AEC-Q200 qualified, operates -55°C to +125°C. Ideal for power line noise suppression in industrial, automotive, and consumer electronics. 100% original, ROHS compliant.