ABB Module
ABB YPG110E YT204001-FD 10.1 Inch Touch Control Panel for ACS880 DCS-800 Drives
10.1-inch capacitive multi-touch HMI with 1280x800 resolution, IP66 front, SIL 3 emergency stop, and built-in Ethernet/USB. Optimized for ABB ACS880, DCS-800 drives and PLCs. CE, UL, ABS certified. Ideal for cranes, mills, and marine applications.
ABB DATX 130 3ASC25H214 Analog Input Module 16 Channel 14 Bit 10 ms Advant OCS
High-density 16-channel analog input module for ABB Advant OCS. Converts ±10 V, 4-20 mA signals with 14-bit resolution, 0.1% accuracy, and 10 ms scan time. Features galvanic isolation, hot-swap capability, and on-board 24 VDC supply. CE, UL 508, ABS marine certified. Ideal for mills, power plants, and marine vessels.
ABB QHFT200F YL681001-AF 200A High Speed DC Fuse Holder Touch Safe 690V
200A, 690V DC high-speed fuse holder with touch-safe IP20 design. Ultra-rapid arc-quenching under 1ms protects IGBT bridges. Visual striker indicator, lockable holder, and low 18W power loss. CE, UL 248-13, IEC 60269-4 approved for ABB drives.
ABB R100.30-ZS 8-Channel 24VDC 0.5A Source Output Module for R100 I/O System
The R100.30-ZS is an ultra-slim 12mm 8-channel source output module delivering 24VDC at 0.5A per channel with 1ms update time. Features short-circuit protection, galvanic isolation, and hot-swap capability. Ideal for conveyor, packaging, and HVAC applications. CE, UL 508, cULus certified.
ABB SDCS-IOE-2 61208097 DCS-800 I/O Extension Module 16 Digital Inputs 8 Digital Outputs
Adds 32 mixed I/O to DCS-800 DC converters: 16 DI, 8 DO, 4 AI, 2 AO. On-board 24V sensor supply, galvanic isolation, hot-swap capability. CE, UL 508, ABS certified. Cuts panel wiring by over 30% for paper, metals, crane, and marine drives.
ABB SDCS-IOE-2 61208097 DCS-800 DC Drive I/O Extension Board 24V 32 I/O Galvanic Isolation
Adds 16 digital inputs, 8 digital outputs, 4 analog inputs and 2 analog outputs to DCS-800 drives. Features 24 VDC on-board supply, 1500 V galvanic isolation, and LED diagnostics. Reduces panel wiring by over 30%. CE, UL 508, ABS certified.
ABB Advant OCS SNAT 607MCI 61027769F Multi Channel Interface Board 8 Differential Inputs 250 kHz
Multi-channel pulse and communication interface board for Advant OCS racks. Features 8 differential inputs up to 250 kHz, isolated RS-485/RS-422 serial port, and 24 V push-pull outputs. Reduces wiring by over 30%. CE, UL 508, ABS marine certified. Plug-and-play DIN-rail installation.
ABB SAFT112POW 57411431 Advant OCS Power Supply Module 150W 24VDC 5A
Triple-output power supply module for Advant OCS racks. Converts 100-240VAC to regulated 24VDC/5A, 5VDC/10A, 12VDC/1A. Features hot-swap, built-in redundancy with OR-ing diodes, 91% efficiency, and comprehensive diagnostics. CE, UL 508, ABS marine certified. Ideal for paper, metals, power, and marine control systems.
ABB SNAT617CHC 61037136D Pulse Amplifier Communication Board 200 kHz 24 VDC
Plug-in pulse amplifier and serial communication board for ABB DC drives and inverters. Supports up to 200 kHz encoder pulses, isolated RS-485/RS-422, and 6 push-pull outputs. Reduces cabinet wiring by over 30%. CE, UL 508 certified. DIN-rail mount, 24 VDC supply.
ABB 07EB61R1 Digital I/O Module - 16 Inputs 16 Outputs 24VDC for AC31 Industrial Automation
Genuine ABB Advant Controller 31 digital I/O module with 16 isolated inputs and 16 relay outputs. Features 24 VDC operation, 0.2 ms response time, hot-swap capability, and SIL 2 safety certification. Ideal for turbine control, compressor systems, and industrial automation applications requiring reliable performance.
ABB 086339-501 Smart Platform Power Supply 120W 24VDC Input Hot-Swap Redundant
Genuine ABB 086339-501 switch-mode PSU delivers 120W with 92% efficiency. Converts 24VDC to 5V, 3.3V, ±12V rails. Features hot-swap redundancy, OR-ing diodes, ISA G3 coating, and SIL 2 certification for reliable operation in paper, metals, and safety-critical process applications.
ABB 086348-001 ECF Control Board 400 MHz for Smart Platform DCS
Genuine ABB 086348-001 ECF control board with 400 MHz PowerQUICC-II processor, 256 MB RAM, dual Ethernet, and ISA G3 coating. Supports hot-swap, SIL 2 safety, and real-time VxWorks. Ideal for paper, metals, and process control.
ABB YPQ110A 10.1 Inch Industrial Touch HMI Panel 3ASD573001A5 IP65 12-24 VDC
Genuine ABB 10.1-inch WXGA multi-touch HMI with IP65 front, rugged aluminum housing, and wide 12-24 VDC supply. Supports SIL 2, CE, UL 508, ATEX Zone 2. Ideal for machine control and process automation.
ABB YPQ201A YT204001-KA 15.6 Inch Industrial Touch HMI Panel 12-24 VDC IP65
Genuine ABB 15.6" WXGA multi-touch HMI with 10-point PCAP, IP65 front, and rugged aluminum housing. Supports 12-24 VDC, dual Gigabit Ethernet, and SIL 2 safety. Ideal for large machines and process control.
ABB YPR201A YT204001-KE 10.4 Inch Industrial Touch HMI Panel IP65 12-24 VDC
Genuine ABB 10.4-inch SVGA HMI with projected-capacitive multi-touch, IP65 front, and rugged aluminum housing. Supports AC 500/800M systems, dual Gigabit Ethernet, and SIL 2 safety. Ideal for machine control, chemical skids, and marine applications.
ABB YXE152A YT204001-AF 5 Inch Industrial Touch HMI Panel 800x480 IP65
Genuine ABB 5-inch WVGA HMI with 10-point multi-touch, IP65 front, and wide 12-24 VDC input. Certified SIL 2, ATEX Zone 2, and CE. Ideal for compact machines and harsh environments. Includes Ethernet, RS-232/485, USB, and micro-SD slot.
ABB 086318-001 Central Memory Daughter PCA Module 0.25 kg SIL 2 Vibration Resistant
Genuine ABB Smart Platform daughter PCA with high-speed data buffering and ISA-bus interface for MPRC and ECF boards. Lightweight 0.25 kg design for vibration-resistant mounting. Operates from -40°C to +85°C with SIL 2, CE, UL, and ISA G3 certifications. Plug-on format saves rack space.
ABB 81AA03A-E GJR2394100R1210 8-Channel Universal Analog Input Module 16-Bit
Genuine ABB 8-channel universal analog input module for Symphony Plus and AC 800M systems. Accepts RTD, TC, voltage, and current signals with 16-bit resolution and ±0.1% accuracy. Features auto cold-junction compensation, sensor diagnostics, hot-swappable design, and SIL 2 certification. Ideal for power, process, and marine applications.
ABB 83SR04E-E GJR2390200R1211 4-Channel Relay Output Module 24 VDC 5 A
Genuine ABB 4-channel relay output module with 5 A SPDT contacts, 24 VDC coils, and MOV suppression. Hot-swappable on DIN-rail or S800 rack. SIL 2, CE, UL 508, ATEX, IECEx certified. Ideal for motor, valve, and alarm control in AC 500 and AC 800M systems.
ABB SDCS-IOE-2C 64018019 S800 I/O Extension Module 16 Channel 24 VDC
Genuine ABB S800 I/O extension module with 16 configurable digital channels, 24 VDC operation, and 1 ms scan time. Features hot-swap capability, short-circuit protection, and SIL 2 certification for demanding industrial environments.