SFP+ Transceiver Module
1310nm 10km LR Cisco Compatible SFP+ Transceiver Module , 10Gigabit Ethernet SFP+
1310nm 10KM LR Cisco Compatible SFP+ Transceiver Module , 10 Gigabit Ethernet SFP+ Quick Detail: SFP-10G-LR CISCO compatible transceiver module 1. Form: SFP+ 2. Data Rate: 10Gb/s 3. Reach: 10km SMF 4. Wavelenth: 1310nm 5. Connector: LC Dulplex 6. Appliactions: 10GBASE-LR 10G Ethernet 7.DDM/DOM: Yes Product Details Item No. SFP-10G-LR Vendor Name Hilink Form Type SFP+ Max Data Rate 10Gbps Wavelength 1310nm Max Cable Distance 10KM Interface LC duplex Optical Components
SR Cisco Optical 10Gigabit Ethernet SFP Fiber Module , Multi Mode SFP Module
SR Cisco Optical Gigabit Ethernet SFP Fiber Module , Multi Mode 10G SFP SFP-10G-SR Cisco Compatible 10G SFP SR 850nm SFP Transceiver module This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125 μm or 62.5/125 μm multimode optical fiber . The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally
10GBASE-SR 10 gig Juniper SFP Modules 850nm Wavelength MMF 300 Meter LC Duplex
Hilink 10Gb/s SFP 10G SR serial optical interface compliant to 802.3ae 10GBASE-SR, with Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “SFP+” 850nm VCSEL transmitter, PIN photo-detector Product Features: ♦ Optical interface compliant to IEEE 802.3ae ♦ Electrical interface compliant to SFF-8431 ♦ Hot-Pluggable ♦ 850nm VCSEL transmitter,PIN photo-detector ♦ Low power consumption, below 1W ♦ Applicable
2.5GBASE - T Copper SFP Transceiver Module RJ - 45 100M CAT5 2.5G / 1000 / 100Base-T
2.5GBASE-T Copper SFP Transceiver RJ-45 100M CAT5 2.5G/1000/100Base-T Auto Negotiation Hilink SFP-2.5GBASE-T-A Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 2.5Gbase-T / 1000base-T/100base-T standards as specified in IEEE Std 802.3 . SFP-2.5GBASE-T-A uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset. Features
GPON SFP OLT C+ Module 20KM SC/UPC 1490nm / 1310nm SFP 2.5Gbps/1.25Gbps GPON OLT
GPON SFP OLT C+ Module 20KM SC/UPC 1490nm/1310nm SFP 2.5Gbps/1.25Gbps GPON OLT General GPON OLT SFP is designed for OLT side in GPON network. OLT is a equipment integrating L2/L3 switch function, which is located in central office (CO). The main function is to control the information float in both directions: upstream and downstream. The GPON OLT module plays an inevitable role in the upstream and downstream transmission. In order to put across the transmission process, the
10GBase LR SFP+ Transceiver 1310nm 10KM Duplex LC 10G 1310 SMF Optical Module
10GBase LR SFP+ Transceiver 1310nm 10KM Duplex LC 10G 1310 SMF Optical Module Hilink's HLSP311XL-C(I)D10 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single-Mode fiber, and it can support data- rate from 9.95Gb/s to 11.1Gb/s. Digital diagnostics are available via I2C interface as specified in the SFP+ MSA. They are compliant with SFF-843 1 ,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver
10G LR SFP+ Transceiver Module 10KM 1310nm J9151 Compatible SMF DOM LC
10G LR 10KM 1310nm J9151 Compatible SMF SFP+ SFP Transceiver DOM LC General HILINK HLSP311XL-C(I)D10 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over SingleMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication. Features Supports 9.95 to
100GHZ C Band 10G DWDM 100KM Optical Transceiver Module For Long Haul Transmission
100GHZ C-Band 10G DWDM 100KM CH17-61 DW-SFP10G-100 for Long-haul Transmission Hilink 10G DWDM SFP+ ZR optical transceivers are designed for use in 10-Gigabit Ethernet links up to 100km over Single Mode fiber. Features Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection C-band DWDM 100GHz channel spacing EML Transmitter and APD Receiver Max link length up to 100Km on SMF RoHS Compliant and Lead-Free Digital diagnostic compatible with SFF
Industrial Grade 25G BIDI 1270/1310nm 40KM APD+TIA Optical Module Single-Fiber Simplex LC DOM
Industrial Grade 25G BIDI 1270/1310nm 40KM APD+TIA Optical Module Single-Fiber Simplex LC DOM Transceiver The HL-SFP28-25G-UD-40KM Transceiver is designed for 40km reach service from 24.33Gb/s to 25.78Gb/s bi-directional single mode high-speed communications equipment where exceptional performance, reliability, and cost-effectiveness are essential. This low-power module operates on a 3.3V DC power supply and is available in industrial temperature ranges. Compliant with SFP28
10G SFP+ Optical Module 60km BiDi SFP+ Transceiver with 1270nm/1330nm Wavelength and DOM LC Connector
10GBASE SFP Transceiver 60KM BIDI SFP+ SMF 1270nm/1330nm DOM LC Optical Module General The HL-SFP10G-UD-60 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HL-SFP10G-UD-60 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm; CBP-32192-L6 C module is designed for
25GBASE SFP28 25G BIDI 10KM 1270/1330nm DML+PIN LC Optical Module Transceiver DOM
25GBASE SFP28 25G BIDI 10KM 1270/1330nm DML+PIN LC Optical Module Transceiver DOM The 25G BIDI SFP Transceiver is designed for 10km reach service from 24.33Gb/s to 25.78Gb/s bi-directional single mode high-speed communications equipment where exceptional performance, reliability, and cost-effectiveness are essential. This low-power transceiver operates on a 3.3V DC power supply and is available in industrial temperature ranges. Compliant with SFP28 MSA, SFF-8431, and SFF-8432
25Gb/s 50Km SFP28 BIDI Transceivers APD+PIN LC Connector SFP28 Optical Module DOM
25Gb/s 50Km SFP28 BIDI Transceivers APD+PIN LC Connector SFP28 Optical Module DOM The HL-SFP28-BXU-L50/HL-SFP28-BXD-L50 Transceiver is designed for 50km reach service from 24.33Gb/s to 25.78Gb/s bi-directional single mode high-speed communications equipment. This optical module delivers exceptional performance and reliability with low power consumption, operating on a 3.3V DC power supply and available in industrial temperature ranges. Compliant with SFP28 MSA, SFF-8431, and
25Gbps BIDI 40KM 1270/1310nm 40KM APD LC DOM Transceiver 25G Ethernet Fiber Optic Transceivers
25Gbps BIDI 40KM 1270/1310nm 40KM APD LC DOM Transceiver 25G Ethernet Fiber Optic Transceivers Product Specifications Attribute Value Data transfer rate 25G Max Distance 600km Wavelength 1 1270nm/1310nm Connector LC Simplex Warranty 3 Years CE FCC Rohs Support Product Description The HL25G40x-xxTransceiver is intended for 40km reach service from 24.33Gb/s to 25.78Gb/s BI-direction single mode high-speed communications equipment where low-cost, extraordinary performance and
25Gb/s SFP28 BIDI 60km 1295/1309nm LC DDM Transceiver
25Gb/s SFP28 BIDI 60km 1295/1309nm LC DDM Transceiver Product Specifications Attribute Value Data transfer rate 25G Max Distance 600km Wavelength 1 1295nm/1309nm Connector LC Simplex Warranty 3 Years CE FCC Rohs Support Product Description The SFP28-25G-UD-60 series single mode transceiver is small form factor pluggable module for duplex optical data communications. The SFP28-25G-UD-60 module is designed for single mode fiber and operates at a nominal wavelength of 1295.56nm
HL-SFP-BX-10KM 10G SFP+ Transceiver Module BIDI 20km 1270nm 1330nm LC Connector RoHS
HL-SFP-BX-10KM 10G SFP+ Transceiver Module BIDI 20km 1270nm 1330nm LC Connector RoHS Compliant P roduct F eatures Supports 9.95 to 10. 3 Gb/s bit rates Simplex LC Connector Hot pluggable SFP+ footprint Uncooled 1 27 0nm DFB transmitter, 1330nm PIN photo-detector Uncooled 1 33 0nm DFB transmitter, 1270nm PIN photo-detector Applicable for 10km SMF connection Low power consumption , < 1W Digital Diagnostic Monitor Interface Optical interface compliant to IEEE 802.3ae 10GBASE-LR
10G-ZR4-80KM 10G BIDI Transceiver Module 80KM 1490nm/1550nm SFP+ STM-64 WDM 8SFP+ SMF
10G-ZR4-80KM 10G BIDI 80KM 1490nm/1550nm SFP+ STM-64 WDM 8SFP+ SMF General 10G BIDI 80KM series single mode transceiver is small form factor pluggable module for optical data communications such as 10G Ethernet. It is with the SFP+ 20-pin connector to allow hot plug capability. The transmitter section uses a EML laser, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section consists of a APD photodiode integrated with a TIA.
SFP-10G-LR SFP+ Transceiver 1310nm 20KM Duplex LC 10G SMF Optical Module
SFP-10G-LR SFP+ Transceiver 1310nm 20KM Duplex LC 10G SMF Optical Module Hilink's HLSP311XL-C(I)D10 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single-Mode fiber, and it can support data- rate from 9.95Gb/s to 11.1Gb/s. Digital diagnostics are available via I2C interface as specified in the SFP+ MSA. They are compliant with SFF-843 1 ,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs
10G SFP+ BIDI 100KM Tx1490nm/Rx1550nm LC Fiber Optic Transceiver SFP-10G-BX-100KM
10G SFP+ BIDI 100KM Tx1490nm/Rx1550nm LC Fiber Optic Transceiver SFP-10G-BX-100KM Features Supports 9.95 to 11.3Gb/s bit rates Simplex LC Connector Hot-pluggable XFP footprint Applicable for 100km SMF connection Low power consumption, < 2.0 W Digital Diagnostic Monitor Interface XFP MSA package Operating case temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C Specifications Item No. HL-SFP-BX-100 Vendor Name Hilink Form Type FP Max Data Rate 11.3Gb/s Wavelength 1490
80KM Distance SFP 10G SMF 1550nm ZR Duplex LC DDM Optical Module with EML Transmitter
SFP+ 10G SMF 1550nm ZR 80KM Duplex LC DDM Optical Module SFP-10G-ZR Hilink's HLSP551XL-C(I)D80 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 80km over Single-Mode fiber, and it can support data rate from 9.95Gb/s to 11.1Gb/s. Digital diagnostics are available via I2C interface as specified in the SFP+ MSA. They are compliant with SFF-8431 ,SFF-8432 and IEEE 802.3ae 10GBASE-ZR/ZW. The transceiver designs are
SFP+ 10Gig Ethernet Module 10G SR 850nm 300M LC Duplex DDM Fiber Optic Transceiver for 4G Network WDM Function for FTTH SFP-10G-SR
SFP+ 10Gig Ethernet Module 10G SR 850nm 300M LC Duplex DDM Fiber Optic Transceiver for 4G Network WDM Function for FTTH SFP-10G-SR Hilink's HLSP85 lXL-C()DS3 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over MultiMode fiber. SFP-10G-SR(Short Range) is a very common sfp module, which can links up to 300 meters in multimode fiber. In general, SR modules are almost multimode and operating in 850nm wavelength. They are