Lab Testing Equipment
Adhesive Tape Lab Test Equipment Tape Retention Adhesion Tester Adhesive Tape Holding Force Test Machine
Adhesive Tape Holding Force Test Machine to do static load test for the adhesion of the tape Product introduction Adhesive Tape - Holding Force Test Machine made a static load test, load and temperature at a certain timing belt can automatically maintain the time, such as falling halfway, then record the time, to confirm the tape adhesive limitation, trial hold time of its stalemate. Test Principle The adhesive specimen attached to the test plate hanging vertically in the
ASTM D1424 Tearing Strength Tester Of Fabrics By Falling Pendulum Type Elmendorf Test Apparatus
Tear Tester Paper Strength Tester Product information The tear strength tester can mainly measure the tensile force, tear, peeling, adhesion of various materials... resistance properties. Print test date, time and The display value set by the display. The tear strength tester can be equipped with a variety of fixtures and elongation test devices, or assembled according to customer needs. Suitable for various food packaging, textile, rubber, plastic, synthetic leather and
ISO 2759 ASTM D3786 Cardboard & Paper Bursting Strength Tester
Automatical Paperboard Burst Strength Testing Equipment Product information Automatic Bursting Strength Tester is fit for products which are packaged by corrugated paper such as electronic instruments, electric ware, hardwares, bike, valise, food, shoe, furniture etc, to test the bursting-resistance strength of paper box; it can also test cloth and synthetic leather. The bursting strength tester is adapted with signal output of pressure. While specimen is breaking, the max.
ASTM D1709 AB Method Plastic Film Dart Impact Testing Machine Falling Dart Impact Tester
ASTM D1709 AB method Plastic film Drop Dart Tester Introductions Falling darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged. Standards GB/T 9639.1-2008, ASTM D1709, IS0 7765-1-1988, JIS K7124-1 Configuration of the host computer, A method (B method optional) dart head, foot switch Working Principle When trial is
Air Flow Test For Writing Instruments ISO 11540 Pen-Cap Air Flow Tester
ISO 11540 Air Flow Test For Writing Instruments Introductions This machine is based on the "GB21027-2020 General Requirements for the Safety of Student Products" standard (i.e., under the pressure of 1.33KPa, the air ventilation of the pen cap must reach 8L/min), which is a special testing instrument customised for pen cap air permeability testing. (i.e. under 1.33KPa pressure, the air ventilation of the pen cap must reach 8L/min), and it is a special testing instrument
Manual 500KN Wire Crimp Pull Testers
Wire Tensile Testing Machine Wire Harness Tester Tensile Test Instrument Pull-off Testing Machine Product Introduction Of Terminal Pull Tester Terminal tension tester is a testing equipment developed by our company for the wire harness and electronics industry.Designed to detect the pull-out force of various harness terminals. Configurable NK, HF push-pull gauges and special fixtures The instrument has the characteristics of compact equipment, accurate control, high
Compact Wire Tensile Testing Machine / Wire Harness Tester Accurate Control
Wire Tensile Testing Machine Wire Harness Tester Tensile Test Instrument Pull-off Testing Machine Product Introduction Of Terminal Pull Tester Terminal tension tester is a testing equipment developed by our company for the wire harness and electronics industry.Designed to detect the pull-out force of various harness terminals. Configurable NK, HF push-pull gauges and special fixtures The instrument has the characteristics of compact equipment, accurate control, high
Rock Double CE Abrasive Grinding Machine 1400rpm
Introductions Double-end grinding machine is suitable for the departments of water conservancy and hydropower, geology and minerals, transportation, construction and so on in colleges and universities. Through the abrasive value determination to evaluate the anti-abrasive performance of not stone and artificial aggregate, to provide a basis for the auxiliary construction of different friction coefficient requirements of the road surface. Structure composition It is composed
Iso 3036 Cardboard Puncture Strength Tester AC220V
Puncture Strength Tester Cardboard Puncture Strength Tester Product use overview Computer Intelligent Corrugated Cardboard Puncture Strength Tester is a special testing instrument for corrugated cardboard puncture resistance (puncture strength). This instrument has a fast compression, automatic reset of the operating handle and reliable safety protection, with liquid crystal display, Thermal printer and other characteristics, applicable to a wide range of cardboard, cardboard
Industrial Cobb Tester Paper Cardboard Water Absorption Test
Description Cobb Absorption Tester is a special instrument for determination of water absorption of the paper and paperboard, the main technical indexes and performance parameters is according with the relevant provisions of ISO535 Paper and Paperboard - Determination of Water Absorption -- Cobb law and QB/T1668 Cobb Absorption Determination Instrument. This instrument is mainly used to determinate the surface water absorption of the sized paper and paperboard under the
SL-C50A Edge Crush Corrugated Sample Cutter Lab Testing Equipment
Description ECT Edge Crush Corrugated paper sample cutter is an indispensable special sampling instrument for edge crush test and adhesive strength test of corrugated boards, can quickly and accurately cut the sample of given size, and is an ideal auxiliary appliance for departments of production, scientific research and quality supervision and inspection of corrugated boards and cartons. Test Standards BS EN ISO 3037 ISO 3037, Fefco T8, Tappi T 839, T 838 T 811 and so on.
AC220V 15A Bicycle Pedal Hub Abrasion Tester EN 14764
Bicycle Pedal Hub Abrasion Tester EN 14764 Test principles According to EN14764:2005 , ISO4210-2014 Application Of Bicycle Pedal Hub Abrasion Tester The machine is designed and manufactured according to the standard, the foot pedal or hub is installed on the rotating axis of the instrument, and the load is applied and the set speed is selected according to the specification. The machine is designed and manufactured according to the standard, and the foot pedal or hub is
Bicycle Crank Sprocket Combination Parts Fatigue Tester EN 14764
Bicycle Crank Sprocket Combination Parts Fatigue Tester EN 14764 Test principles According to EN14764:2005 , ISO4210-2014 Application Of Bicycle Crank Sprocket Combination Parts Fatigue Tester This machine is used to simulate the actual use of the bicycle sprocket crank. A certain force is applied to the left and right footpegs at the use position. After a certain number of times, the wear and tear is detected. Technical parameters Capacity 5000kgf*1set Resolution 5‰ Electric
50HZ 5.5KW Bicycle / Bike Wheel Holding Force Disengagement Tester ISO 4210
ISO 4210 Bicycle/Bike Wheel Holding Force Disengagement Tester Test principles According to EN14764:2005 , ISO4210-2014 Application Of Bicycle/Bike Wheel Holding Force Disengagement Tester With a large wheel as the active wheel to drive the wheel rim under test, it can be used for "dynamic walking test", "brake performance test" and "wheel static pressure test", which can be applied to It can be applied to "carbon fiber frame" for brake test; it is control
ISO 4210 Universal Material Testing Machine 0.01 - 500mm/Min
ISO 4210 Universal Material Testing Machine Test principles According to EN14764:2005 , ISO4210-2014 Application Of Universal Material Testing Machine Suitable for bicycle parts and materials, into the car of the tensile, compressive, torsion and other strength testing, full-featured, versatile. Technical parameters Load Capacity 5,000kgf Unit Switching N/kN/g/kg/ton/lb ,Shift:mm/cm/inch Load Breakdown Degree 1/20,0000 Test Width 1200mm Joint plate stroke 1400mm Test Stroke
ISO 4210 Bicycle / Bike Wheel Holding Force Disengagement Tester PLC
ISO 4210 Bicycle/Bike Wheel Holding Force Disengagement Tester Test principles According to EN14764:2005 , ISO4210-2014 Application Of Bicycle/Bike Wheel Holding Force Disengagement Tester Fasten the wheel to the frame and fork with nuts, test the front wheel clamping force by applying a force of 500N symmetrically on both sides of the front axle in the direction of front wheel disassembly, and hold for 30s to check the relative displacement between the front axle and the
Bicycle / Bike Axial Static Load Tester 178N 200N 250N 370N
Test principles According to GB 14746 3.10,EN 14765 4.13.5, ISO4210-2014-7/4.2 Application Of Bicycle/Bike Axial Static Load Tester It is used to measure the combination of frame, pedals, transmission system and rear wheel of a bicycle. If there is a shifting mechanism also included in the test range, gradually apply a certain force to the center of the left and right pedals, respectively. After 15 seconds, check if there is any damage. Test method 1. fix the front and rear
Bicycle / Bike Wheel Rotation Progress Tester 700 Mm Diameter
Test principles According to EN14764:2005 , ISO4210-2014-7/4.1 Application Of Bicycle/Bike Wheel Rotation Progress Tester The equipment is commonly used in bicycle wheel rotation accuracy. Used to measure the radial runout and axial runout of the wheel, equipped with measuring wheel to radial, axial and tire with its auxiliary parts between the measurement tool, measuring tool accuracy of 0.01mm; and automatically record the maximum amount of runout and the maximum clearance
1 - 5Hz Bicycle Module Dynamic Fatigue Tester AC220V 15A
Test principles Bicycle Module Dynamic Fatigue Tester This instrument is manufactured in accordance with ISO 9001 international quality certification standards. The force calibration is in accordance with ISO 7500/1, EN 1002-2, BS 1610, DIN 5122, ASTM E4, JIS B7721/ B7733, CNS 9471/9470, JJG 475-88, ISO 4210 and other national standards. It is suitable for bicycle parts and materials, and the fatigue test of finished bicycle, with complete functions and wide application, and
Bicycle / Bike Fork Bending Fatigue Backward Impact Tester EN Standard
Bicycle/Bike Fork Bending Fatigue Tester And Backward Impact Tester EN Standard Bicycle/Bike Fork Bending Fatigue Tester and Backward Impact Tester Test principles A full alternating, cyclic dynamic load Fo, in the plane of the wheel and perpendicular to the axis of the fork riser, was applied to a load carrying device that rotated on the pivot of the fork joint. The test cycle is 100,000 cycles and the test force values are shown in Table 9. The maximum test frequency is