Oil Testing Equipment
ASTM D974 Gasoline and kerosene acidity detection SH108B reflux automatic acidity tester Automatic titration
SH108B Automatic Diesel Oil Acidity Tester is designed and manufactured in compliance with GB/T 264‑1983 Determination of Acid Value of Petroleum Products, GB/T 7599‑1987 Determination of Acid Value of In‑Service Transformer Oil and Turbine Oil (BTB), and GB/T 258 Test Method for Acidity of Gasoline, Kerosene and Diesel Oil. It also meets the requirements of GB/T 4945 and ASTM D974. Equipped with a true‑color LCD touch‑screen and full‑Chinese human‑machine dialogue interface,
SH126B LCD Foam Tester Dual Bath Oil Foam Characteristic Detector ASTM D892 Lubricant Foam Performance Test
SH126B LCD Foam Tester Dual Bath Oil Foam Characteristic Detector ASTM D892 Lubricant Foam Performance Test SH126B liquid crystal foam tester is designed according to GB/T12579-90 "Lubricating Foam Performance Determination Method" and ASTMD892. It is used to determine the foam characteristics of engine lubricating oil, gear oil, hydraulic oil and other oil products to evaluate the foam tendency of lubricating oil and the degree of foam stability. Lubricants Testing Equipment
ST-121C Digital Abbes Refractometer for Liquid & Solid Refractive Index and Brix Testing
ST-121C Digital Abbes Refractometer for Liquid & Solid Refractive Index and Brix Testing determination of the refractive index ND average dispersion (nF-nC) of liquid or solid and the mass fraction of dry solids in sugar and water solution, namely hammer Brix, which can be used for the detection and analysis of sugar, pharmaceutical, beverage, petroleum, food, chemical industry production, scientific research and teaching departments. Visual aiming, digital reading,
ST149 Oil Oxidation Stability Analyzer Measures Fat OSI Induction Period Meets GB ISO AOCS
ST149 Oil Oxidation Stability Analyzer Measures Fat OSI Induction Period Meets GB ISO AOCS ST149 automatic plant oil oxidation stability index (OSI) is designed and manufactured in strict accordance with GB/T 21121-2007 determination of oxidation stability of animal and vegetable oils (Accelerated oxidation test). It is controlled by a single chip microcomputer and displayed by a liquid crystal LCD. The results are automatically generated and printed. OSI (oxidative stability
Temp Range -40℃~ 600℃ Touch Screen Automatic Wax Precipitation Point Tester For Crude Oil
PRODUCT DESCRIPTION Temp Range: -40℃ ~ 600℃ | Touch Screen Automatic Crude Oil Wax Precipitation Point Tester The SH0545 Automatic Crude Oil Wax Appearance Temperature Tester is equipped with a touch screen. It supports a wide range of tests, such as glass transition temperature measurement, phase transition analysis, melting and thermal enthalpy testing, product stability evaluation, curing characteristic analysis, specific heat measurement and oxidation induction period
Plant Oil smoke point meter screen LCD display with working environment of temperature -10-40 deg C 220V, 50Hz
ST123 Vegetable Oil Smoke Point Tester LCD display screen; operating ambient temperature: -10 ℃ ~ 40 ℃; power supply: 220 V, 50 Hz The ST123 Vegetable Oil Smoke Point Tester is professional equipment designed to test the smoke point of vegetable oils. It complies with Item 5 "Second Method – Visual Determination Method" specified in GB/T 20795-2006 Determination of Smoke Point of Vegetable Oils and AOCS Cc 9a-48. It is widely applied in quality supervision, import & export
SH0175 Distillate Fuel Oxidation Stability Tester with 4-Channel High Precision Control ASTM D2274
SH0175 Distillate Fuel Oxidation Stability Tester with 4-Channel High Precision Control ASTM D2274 The SH0175 Distillate Fuel Oil Oxidation Stability Tester is engineered and built to comply with China’s industry standard SH/T 0175 Test Method for Oxidation Stability of Distillate Fuel Oils (Accelerated Method). It operates per the SH/T 0175 protocol to measure the inherent stability of middle distillate fuel oils through accelerated oxidation testing. This automated unit is
SH0209 Hydraulic Oil Thermal Stability Tester SH/T0209 Standard Hydraulic Fluid Test Oven
SH0209 Hydraulic Oil Thermal Stability Tester SH/T0209 Standard Hydraulic Fluid Test Oven Performance Features The SH0209 hydraulic oil thermal stability tester is built in strict compliance with SH/T0209 *Test Method for Thermal Stability of Hydraulic Fluids*, and is designed for testing mineral oil-based and formulated hydraulic fluids. This unit comes with an imported digital PID programmable temperature controller. It uses a dedicated high-speed 16-bit A/D converter,
SH7550 Crude Oil Wax Content Tester for Crude Wax & Asphaltene Test Following SY/T 7550
SH7550 Crude Oil Wax Content Tester for Crude Wax & Asphaltene Test Following SY/T 7550 This crude oil test unit delivers dependable performance for precise wax precipitation point measurement of crude oil samples. Backed by a 12-month warranty, it operates on AC220V/50Hz power, holds temperature precision within ±0.5℃, and measures 320×260×430mm overall. Its water bath supports adjustable heating from ambient temperature up to 90℃. The unit is fitted with a standard USB port
Plant Oil smoke point meter screen LCD display with working environment of temperature -10-40 deg C 220V, 50Hz
ST123 Vegetable Oil Smoke Point Tester Equipped with LCD screen; Operating environment temperature: -10℃ ~ 40℃, Power supply: 220V, 50HzProduct IntroductionThe ST123 Vegetable Oil Smoke Point Tester is professionally developed for testing the smoke point of vegetable oils. It complies with Clause 5 (Second Visual Test Method) of GB/T 20795-2006 Determination of Smoke Point of Vegetable Oils and AOCS Cc 9a-48 standards.This tester is widely applicable for quality inspection
Petroleum Product Mechanical Impurity Analyzer for Lab with Power and Temperature Control Accuracy
Petroleum Product Mechanical Impurity Analyzer for Lab with Power and Temperature Control Accuracy SH101 Mechanical Impurity Tester is developed in accordance with GB/T511, the standard test method for mechanical impurities in petroleum products and additives by gravimetric method. It applies to testing mechanical impurity content of light oil, heavy oil, lubricants and related additives. Equipped with a glass water bath capable of holding two beakers and dual control units,
SD261 70ml Sample Manual Closed Flash Point Tester ASTM D93 Heating Rate 1-12 ℃/Min
PRODUCT DESCRIPTION SD261 70ml Sample Manual Closed Flash Point Tester ASTM D93 Heating Rate 1-12 ℃/Min The SD261 Closed Flash Point Tester is designed and manufactured in strict accordance with GB/T 261-2008 (Pensky-Martens Closed Cup Method). It is used to determine the closed cup flash point of petroleum samples with a flash point above 40℃. The test result obtained by this closed cup method is defined as the closed flash point, measured in ℃. This instrument is widely
SD265D ASTM D445 Petroleum Kinematic Viscosity Tester Double Cylinder 100 Degree Viscosity
PRODUCT DESCRIPTION SD265D ASTM D445 Double-Cylinder Petroleum Kinematic Viscosity Tester (100°C) The SD265D petroleum kinematic viscosity tester is manufactured in full accordance with the Chinese industry standard SY/T5561. It is professionally designed to test the kinematic viscosity of liquid Newtonian petroleum products at constant temperature, complying with the test requirements of GB/T265 and ASTM D445 standard test methods. Main technical features and parameters
Crude Oil Moisture Sediment Analyzer Centrifuge 4000r/min ASTM D4007 touch panel
SH6533A Crude Oil Moisture and Sediment Analyzer adopts the centrifugal method to test moisture and sediment content in crude oil, fully complying with GB/T 6533-86, ASTM D4007 and ASTM D1796 standards. It applies centrifugal separation principle to determine moisture and sediment in crude oil, serving as ideal testing and separation equipment for oil production enterprises and scientific research institutes. Main Technical Specifications and Performance Features Microcompute
ASTM D323 Petroleum Testing Instruments SH8017 Gasoline Vapor Pressure Tester Reid Method
The SH8017 Vapor Pressure Tester for Petroleum Products is designed and manufactured in accordance with GB/T 8017 Determination of Vapor Pressure of Petroleum Products (Reid Method) of the People’s Republic of China. It is intended for the measurement of vapor pressure of gasoline, volatile crude oils, and other volatile petroleum products. It also conforms to ASTM D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method). This instrument is also
Fluorescence Spectral Sulfur Analyzer Diesel Fuel Sulfur Tester SH407 Lab Test Instruments
The SH407 X-ray Fluorescence Sulfur Analyzer utilizes the energy-dispersive principle with an electromechanical integrated microcomputer structure, enabling fast and accurate analysis. It complies with ASTM D4294, the standard test method for sulfur content in petroleum products by energy-dispersive X-ray fluorescence spectrometry. Its repeatability and reproducibility conform to the relevant specifications of national standards GB/T 17040-2008 Determination of Sulfur Content
SH12580 Room Temperature-200 C IEC 61125 Insulation Oil Oxidation Stability Tester With Timer
SH12580 Room Temperature-200 C IEC 61125 Insulation Oil Oxidation Stability Tester With Timer Product Description: Our petroleum testing instruments are fitted with four oxygen flow meters, delivering extensive testing versatility. The digital temperature controller ensures precise temperature maintenance during testing, further enhancing result accuracy and reliability. The instruments are also compatible with air pumps and purification systems, offering a complete solution
Uniform Temperature Control ASTM D1298 Density Tester for Crude and Liquid Petroleum Products
# ASTM D1298 Density Tester for Crude and Liquid Petroleum Products SH102 (Hydrometer Method) The SH102 petroleum density tester is designed and manufactured in full compliance with Chinese national standard **GB/T 1884: Petroleum and liquid petroleum products — Determination of density (Hydrometer method)**. Developed by our company, this instrument is specially used for measuring the density of crude oil and liquid petroleum products. **Standards complied with**: GB/T 1884,
SH8019A 5-Hole Actual Gum Tester Air Method 160-165℃ ASTM D381 special oil-free silent air compressor.
The SH8019A Existent Gum Tester (Jet Evaporation Method) is specifically engineered for determining the existent gum content in aviation gasoline and motor gasoline. Adhering to **ASTM D381** and the equivalent Chinese standard **GB/T 8019-2008: Determination of Fuel Gum Content by Jet Evaporation Method**, this instrument is exclusively used for testing existent gum in aviation gasoline and automotive gasoline. It is fitted with a dedicated oil-free silent air compressor. ##
SH7550 Crude Oil Wax Content Tester ASTM D6560 4-Hole Refrigeration High Precision Digital Thermostatic Control
SH7550 Crude Oil Wax Content Tester ASTM D6560 4-Hole Refrigeration High Precision Digital Thermostatic Control The SH7550 crude oil wax content tester is built and produced in full compliance with the Chinese industry standard SY/T 7550: Determination of Wax, Resin and Asphaltene Contents in Crude Oil. It is used to test the wax content in crude oil samples with a moisture content below 0.5% (mass fraction). Performance Features Adsorption Unit: Equipped with a stainless