Electrical Appliance Tester
IEC60335-2-4 Spillage 30MM Manual Test Apparatus For Checking Refrigerating Appliances Electrical Insulation Performance
IEC60335-2-4 Spillage 30MM Manual Test Apparatus For Checking Refrigerating Appliances’ Electrical Insulation Performance Products Introduction This device meets the standard of IEC 60335-2-24 clause 15.101 & 15.102 and figure 101. Household and similar electrical appliances-safety-Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers. It is used to check the refrigerating appliances’ electrical insulation performance after the
Defrosting Electrical Appliance Tester Digital Display Adjustable Voltage Apparatus IEC 60335-2-24
IEC 60335-2-24 Defrosting Test Digital Display Adjustable Voltage Apparatus Product Introduction The device is designed for in accordance with Conforms to IEC 60335-2-24 clause 11.102 and Annex BB:Household and similar electrical appliances-safety-Part 2-24:Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers. it is used for water evaporation for accumulation of frost. Application: It is use to test the defrost time and water evaporation
IEC60335 Electrical Appliance Tester 2 Stations Washing Machine Door Endurance Tester
IEC60335 Tumble And Wave-Wheel Washing Machine 2 Stations Door Performance Endurance Tester Standard: IEC 60335-2-7 household and similar electrical appliances – safety: part 2-7:particular requirements for washing machines, clause 20.101; IEC 60335-2-11 household and similar electrical appliances – safety: part 2-11:particular requirements for tumble dryers, clause 20.101. Application: The device is used for mechanical endurance test to doors of washing machine and tumble
PLC Electrical Appliance Tester Refrigerator Plc Two Open Sides Door Performance And Drawer Endurance Tester IEC 62552
IEC 62552 And IEC 60335-2-24 Refrigerator Plc Two Open Sides Door Performance And Drawer Endurance Tester Product information: The integrated door endurance tester is special designed and manufactured as per IEC 60335-2-24 clause 22.112, IEC 62552 clause 11.2,clause 11.3 and etc. Suitable for refrigerator door test. It is a special equipment for durability and structural testing of refrigerator doors. The equipment adopts advanced PLC intelligent control system, touch screen
1 Station Electrical Appliance Tester 220V Label Marking Abrasion IEC60730-1
1 Station Electrical Appliance Tester 220V Label Marking Abrasion IEC60730-1 Production introduction: This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional
IEC60745 Electrical Appliance Tester Supply Cord Flexing PLC Control 4KW With Safety Cage Tester
IEC60335 and IEC60745 Household Appliance Supply Cord Flexing PLC Control 4KW With Safety Cage Tester Description: The power cord flexibility performance tester is special designed and manufactured according to IEC60335-1 clause 25.14. Figure 8, 24.12 of IEC60745-1 Figure 9. 25.101 and 11.101 of IEC60335-2-23 and etc., it is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as coffee pot / electric iron), applicable
LCD Touch Screen Electrical Appliance Tester , Water - Tap With Sensor Switch Endurance 2 Station Tester EN15091
PLC Water-Tap With Sensor Switch Endurance 2 Station Tester EN15091 Product information : It is designed and manufactured according to EN15091:2013 Sanitary tapware-Electronic opening and closing sanitary tapware, the test sample is Water-tap with sensor switch, It is used for endurance testing of the sensor switch of the water-tap to verify its reliability. Test principle The robot arm is driven by the servo motor to drive the human body analog sensing resistor to repeatedly
Dishwasher Internal Wiring Single Station Flexible Tester Load Voltage IEC60335 Adjustable
IEC60335-2-5 Dishwasher Internal Wiring PLC Control Single Station Flexible Tester With Load Voltage Adjustable Product information The tester is designed and manufactured according to IEC 60335-2-5 household and similar electrical appliances – safety: part 2-5: particular requirements for dishwashers, clause 23.3; EN 60335-2-7 clause 23.3; IEC 60335-1 clause 23.3, It is used to test whether the internal wiring of the dishwasher door has sufficient bending resistance under
Cord Flexing Test 0-360 ° Single Station Machine IEC60335 For Household Appliance
IEC60335 PLC Control Cord Flexing Test 0-360 ° Single Station Machine For Household Appliance Product Introduction The Household Appliance Supply Cord Flexing Test Apparatus is special designed and manufactured according to IEC60335-1, GB4706-1, IEC60335-2-14, GB4706-30 clause 23.3 and 25.14 and etc., it is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for
Portable Microwave Survey Instrument 0.9G - 12.4GHZ LED Digital Display With Measuring Range Of 0.2uw/Cm2-20mw/Cm2
Portable Microwave Survey Instrument 0.9G - 12.4GHZ LED Digital Display Meter Products Introduction It is a portable instrument for measuring the leakage of various microwave equipment in space energy. Working frequency band is 0.9-12.4GHz. It is especially suitable for microwave leakage detection of microwave ovens, microwave band radar, microwave relay, satellite communication, microwave medical instruments, industrial microwave equipment, widely used in medical and health,
4KW Flexing Test Apparatus Household Appliance Supply Cord IEC60335 PLC Control
4KW Household Appliance Supply Cord IEC60335 PLC Control Flexing Test Apparatus Standard: Clause 23.3 and 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC60335-2-14 and etc. Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance. Test sample: Small household
Automatic Kettle Life - Span Single Station Tester 0-16A Load Current Adjustable IEC60335-2-15
IEC60335-2-15 Automatic Kettle Life-Span Single Station Tester 0-16A Load Current Adjustable Product Introduction This test equipment confirms to IEC60335-2-15 clause 19.3 and clause 22.103 standard requirements. It is used for the kettles’ dry heating test, water boiling test and insertion & withdraw with or without current test, it can be widely used in production line detection and laboratory measurement. Technical Parameters 1. Input voltage: Single-phase 220V / 50HZ. 2.
IEC60255-5 Electrical Appliance Tester High Voltage Impulse Generator Output Voltage Waveform Peak From 500V To 15 kV
IEC60255-5 High Voltage Impulse Generator Application High Voltage Impulse Generator HS0255 is manufactured in accordance with the IEC60255-5 "Insulation Test of Electrical Relays" promulgated by the International Electrotechnical Commission (IEC), measuring the insulation coordination of relays and protective devices, and performing impulse voltage tests. High Voltage Impulse Generator Introduction 1. Main Specifications Test pulse output waveform:Voltage wave: 1.2/50 μs
IEC60669-1 Clause 19.3 Electrical Appliance Tester Self Ballast Lamp Load Box 3 Channel
IEC60669-1 clause 19.3 Self Ballast Lamp Load Box Standard IEC60669-1:2017 clause 19.3 Application This device is suitable for breaking capacity and normal operation life test to fixed switches for house held and similar purpose, especially suitable for self ballast lamp switch electric stress and thermal stress test when control the LED circuit. To verify whether the switch can withstand normal use, any mechanical damage or electrical fatigue failure under normal operation,
Ceramic Material Fuchsine And Methylated Spirit Pressure Testing Machine 0.5 - 20MPa ± 0.5MPa IEC60335-1
IEC60335-1 Ceramic Material Fuchsine And Methylated Spirit Pressure Test Apparatus Description The test apparatus is designed and manufactured according to general requirements of IEC60335-1, 22.32,22.47 ceramics tightness testing device, and 22.47 for storaged water heater water pressure test. It consists of two parts: magenta test vessel and pressure boosting device. Specifications No. Item Parameter 1 Power source AC380V,50Hz 2 Power 3KW 3 Test pressuer 0.5-20MPa±0.5MPa 4
Cord Anchorage Strain and Twisting Test Equipment Torque Arm 20mm IEC60335-1 Clause 25.15
IEC60335-1 Clause 25.15 Cord Anchorage Strain and Twisting Test Equipment Product information: The test appliance conforms to IEC60335-1 Clause 25.15. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Technical parameters: Power Supply AC220V, 50HZ Pull force weights 10N*2,20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved) Torque weights 5N*12.5N*17.5N*1(the torque
IEC 60335-1 Clause 22.16 Automatic Cord Reels Endurance Testing Machine Driven By Pneumatic
IEC 60335-1 Clause 22.16 Automatic Cord Reels Endurance Testing Equipment Drive By Pneumatic Standard: IEC 60335-1 Clause 22.16 Household and similar electrical appliances – Safety – Part 1: General requirements. Application: It is used to check the automatic cord reels shall be constructed so that they do not cause – undue abrasion or damage to the sheath of the flexible cord; – breakage of conductor strands; – undue wear of contacts. Test sample: Automatic cord reels of
IEC60335-1 clause 21.2 Abrasion Strength Resistance Testing Machine With Stepper Motor - driven
IEC60335-1 clause 21.2 Abrasion Strength Resistance Testing Machine Product information: The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. This device adopts a hardened steel pin for scratching. The end of the pin is form of a cone having a tip angle of 40°, its tip being rounded and polished,
1 Station Electrical Appliance Tester , Figure 8 Supply Cord Flexing & Swivel Connections Test Apparatus
Supply Cord Flexing & Swivel Connections Test Apparatus Product information: The power cord flexibility performance tester is special designed and manufactured according to IEC60335-1 clause 25.14. Figure 8, 24.12 of IEC60745-1 Figure 9. 25.101 and 11.101 of IEC60335-2-23 and etc., it is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron), applicable for power cord flexing endurance
IEC 60068 Electrical Appliance Tester , Programmable Temperature Humidity Chamber 150L
IEC 60068 Electrical Appliance Tester Programmable Temperature Humidity Chamber Working Volume 150L Product information This test device can simulate different environment condition.So it is appropriate to test material performance,such as resist heat,resist cold,resist humidity,resist dry. It is designed and manufactured in accordance with the standard requirement of IEC 60068-2-1.1990, IEC60068-2-2.1974 and ect. Technical parameters 1. Working volume: 150L 2. Temperature