CISCO Compatible Transceivers
Compatible 2 Channel TX1490nm / RX1310nm 10km Cisco GLC-2BX-D CSFP Transceiver
Cisco GLC-2BX-D Compatible1.25Gbps BiDi CSFP 2-Channel Transceiver Module TX1490nm/RX1310nm 10km DOM Duplex LC SMF Description Of Cisco GLC-2BX-D Compatible 2-channel CSFP Transceivers The Cisco GLC-2BX-D compatible 2-channel CSFP transceivers are small form factor pluggable modules for Gigabit Ethernet 1000BASE-BX and Fiber Channel single fiber applications by using a 1490nm transmitter and 1310nm receiver. It is with the SFP 20-pin connector to allow hot plug capability.
850nm Cisco DS-SFP-FC8G-SW Compatible 8GFC Fiber Transceiver 150m MMF
850nm Cisco DS-SFP-FC8G-SW Compatible 8GFC Fiber Transceiver 150m MMF Description Of Cisco DS-SFP-FC8G-SW Compatible 8GFC Fiber Transceiver This Cisco DS-SFP-FC8G-SW Compatible 8GFC-SW transceiver is designed for 8Gbps short wave fibre channel connectivity applications, which provides link up to 300m over multi-mode fiber(MMF) via duplex LC receptacle. This 8GFC-SW transceiver uses top quality 850nm VSCEL Laser transmitter and PIN Photodiode receiver. It is fully compliant
850nm 10GFC-SW Fiber Transceiver 300m MMF For Cisco DS-SFP-FC10G-SW
850nm 10GFC-SW Fiber Transceiver 300m MMF For Cisco DS-SFP-FC10G-SW Description Of Cisco DS-SFP-FC10G-SW compatible 10GFC-SW transceiver The Cisco DS-SFP-FC10G-SW compatible 10GFC-SW transceiver supports 1.0625-10.518Gbps data rate and applications such as 10G Fiber Channel (10.52Gbps),8G Fiber Channel (8.5Gbps),4G Fiber Channel (4.25Gbps),2G Fiber Channel (2.125Gbps),1G Fiber Channel (1.0625Gbps).It is multi-purpose module used in number of different places of today’s
850nm 16GFC Fiber Channel Transceiver MMF 100m For Cisco DS-SFP-FC16G-SW
850nm Fiber Channel 16GFC Transceiver MMF 100m For Cisco DS-SFP-FC16G-SW Description Of Cisco DS-SFP-FC16G-SW Compatible 16GFC SW Fiber Transceiver This Cisco DS-SFP-FC16G-SW compatible optical transceiver is designed to support 4G/8G/16G Fibre Channel (FC), suitable for storage area network (SAN) links up to 100m over multi-mode fiber. This Cisco DS-SFP-FC16G-SW compatible module features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into a duplex LC
1310nm 16GFC-LW Fiber Channel Transceiver 10km SMF For Cisco DS-SFP-FC16G-LW
1310nm 16GFC-LW Fiber Channel Transceiver 10km SMF For Cisco DS-SFP-FC16G-LW Description Of Cisco DS-SFP-FC16G-SW compatible 16GFC Optical Transceiver This hot pluggable Cisco DS-SFP-FC16G-LW compatible 16GFC-LW transceiver modules are designed to support 4G/8G/16G Fibre Channel (FC), suitable for storage area network (SAN) links up to 10km over single mode fiber. It complies with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) SFF-8431 Rev. 4.1 and SFF-8472 Rev.11
850nm Cisco DS-SFP-FC32G-SW Compatible 32GFC-SW 100m Transceiver For Fiber Channel
850nm Cisco DS-SFP-FC32G-SW Compatible 32GFC-SW 100m Transceiver For Fiber Channel Description Of Cisco DS-SFP-FC32G-SW Compatible 32GFC-SW Transceiver The Cisco DS-SFP-FC32G-SW compatible 32GFC-SW transceiver provides 28Gb/s throughput up to 70 meters over OM3 or 100 meters over OM4 multi-mode fiber (MMF) with host FEC using 850nm wavelength. This 32GFC-SW transceiver is fully compliant with SFP28 Multi-Source Agreement (MSA) and FCIA FC-PI-6 3200-M5F-SN-I standard. Digital
1310nm Cisco Fiber Channel Transceiver 32G SFP28 10km For DS-SFP-FC32G-LW
1310nm Cisco Fiber Channel Transceiver 32G SFP28 10km For DS-SFP-FC32G-LW Description Of DS-SFP-FC32G-LW Compatible Cisco Fiber Channel Transceiver This DS-SFP-FC32G-LW Compatible Cisco Fiber Channel Transceiver is a single channel, hot-pluggable transceiver for 32GFC and 25G Ethernet applications. It operates at a nominal wavelength of 1310nm and supports 8G/16G/32G Fibre Channel (FC) and 25G Ethernet, suitable for storage area network (SAN), data center links up to 10km
SFP28 25GBASE TX-1330nm RX-1270nm 10km Simplex LC SMF Optical Transceiver Module DOM
SFP28 25GBASE SFP-25GBX-D-10 1330nm/1270nm 10KM OEM Single Mode Optical Transceiver DOM Description The Cisco SFP-25GBX-D-10 compatible module provides 25GBase throughput up to 10km over single mode fiber (SMF) using a wavelength of 1330nm-TX/1270nm-RX via an LC simplex connector. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standards. This Cisco SFP-25GBX-D-10 compatible optical transceiver is factory pre-programmed with all the necessary configuration data for
SFP-25GBX-U-10 Cisco Compatible Transceivers TX1270nm / RX1330nm 10km SMF LC
Cisco SFP-25GBX-U-10 Compatible Transceiver TX1270nm/RX1330nm 10km SMF LC Description Of Cisco SFP-25GBX-U-10 Compatible Transceiver This Cisco SFP-25GBX-U-10 compatible transceiver provides 25GBase throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1270nm-TX/1330nm-RX via an LC simplex connector. It is fully compliant with the SFP28 MSA, CPRI and eCPRI standards.SFF-8472 digital diagnostics functions are available via an I2C interface. This Cisco SFP
100GHz C17-C61 1000BASE-DWDM SFP 40km SMF For Cisco DWDM-SFP-xxxx-40
100GHz C17~C61 1000BASE-DWDM SFP 40km SMF For Cisco DWDM-SFP-xxxx-40 Description Of Cisco DWDM-SFP-xx.xx-40 Compatible Optical Transceiver The Cisco DWDM-SFP-xx.xx-40 compatible optical transceiver series is designed for single-mode fiber and operates at a nominal DWDM wavelength from 1528.77nm to 1565.50nm as specified by the ITU-T. It is designed to deploy in the DWDM networking equipment in metropolitan access and core networks. The transceivers are compatible with SFP
1000BASE-CWDM SFP Transceiver 40km SMF For Cisco CWDM-SFP-xxxx
1000BASE-CWDM SFP Transceiver 40km SMF For Cisco CWDM-SFP-xxxx Description Of Cisco CWDM-SFP-xxxx compatible transceiver The Cisco CWDM-SFP-xxxx compatible transceiver module is designed to support a data rate of 1.25Gbps and 40km transmission distance with single-mode fiber (SMF) via an LC connector. There are 18 center wavelengths available from 1270nm to 1610nm with each step 20nm. This transceiver is fully compliant with SFP Multi-Source Agreement (MSA), 1000BASE-CWDM and
1270-1610nm 1000BASE-CWDM SFP Transceiver SMF 20km For Cisco CWDM-SFP-xxxx-20
1000BASE-CWDM SFP 1270~1610nm Transceiver SMF 20km For Cisco CWDM-SFP-xxxx-20 Description Of Cisco CWDM-SFP-xxxx-20 compatible transceiver The Cisco CWDM-SFP-xxxx-20 compatible transceiver is high performance and cost-effective CWDM(Coarse Wavelength-Division Multiplexing) SFP module for 1000BASE Gigabit Ethernet and 1G Fiber Channel application, providing 1Gb/s throughput up to 20km link lengths over single-mode fiber (SMF) via an LC duplex connector. There are 18 center
1000BASE-CWDM Cisco Compatible Transceivers 100km SMF For CWDM-SFP-xxxx-100
1000BASE-CWDM Cisco Compatible Transceiver 100km SMF For CWDM-SFP-xxxx-100 Description Of Cisco CWDM-SFP-xxxx-100 Compatible Transceiver The Cisco CWDM-SFP-xxxx-100 compatible transceiver series is dual fiber 1000Mbps Small Form-factor Pluggable SFP CWDM modules for use in 1000BASE Ethernet and 1G Fiber Channel. The SFP transceivers are designed to be optically interoperable with IEEE 1000Base-CWDM reaching up to 100km over single-mode fiber (SMF) using an LC duplex connector
CWDM-SFP-1610-120 Cisco Compatible SFP 120km Duplex LC Transceiver Module
Cisco CWDM-SFP-1610-120 Compatible 120km SFP Transceiver Module Description Of Cisco CWDM-SFP-1610-120 Compatible SFP This hot-pluggable Cisco CWDM-SFP-1610-120 Compatible SFP Transceiver Module provides 1000Base-CWDM throughput up to 120km over single-mode fiber (SMF) via an LC connector at a nominal wavelength of 1610nm wavelength. There are eight center wavelengths available from 1470nm to 1610nm, with each step 20nm. This Cisco CWDM SFP transceiver series is fully
Single Lambda QSFP28 Optical Transceiver Module 500m LC For Cisco QSFP-100G-DR-S
1310nm Single Lambda QSFP28 Optical Transceiver Module 500m LC For Cisco QSFP-100G-DR-S Description Of Cisco QSFP-100G-DR-S Compatible Optical Transceiver The Cisco QSFP-100G-DR-S compatible optical transceiver is a Single Lambda 106.25Gbps Quad Small Form-factor Pluggable QSFP28 module for use in 100GBASE Ethernet. This 100GBASE-DR provides 100Gb/s throughput up to 500 meters over single-mode fiber (SMF) with built-in FEC using 1310nm wavelength via a duplex LC connector.
100G LR4 QSFP28 Transceiver Module 10km For Cisco QSFP-100G-LR4-I Industrial
100G LR4 SMF Transceiver Module 10km LC DOM Industrial Operating Temperature from -40 to 85°C For Cisco QSFP-100G-LR4-I Description Of 100G LR4 Industrial Transceiver Module For Cisco QSFP-100G-LR4-I The hot pluggable QSFP28 100G LR4 transceiver modules operate at four LAN WDM wavelengths of 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm, max links up to 10km over single-mode fiber (SMF) with duplex LC connectors under the Industrial Temperature Range (-40 to 85°C /-40 to 185
1310nm LWDM Fiber Transceiver Module For Cisco QSFP-100G-ER4L-X
Cisco QSFP-100G-ER4L-X Compatible 100GBASE-ER4 40km SMF Fiber Transceiver Extended Temperature Duplex LC DOM Description Of Cisco QSFP-100G-ER4L-X Compatible 100G ER4 Extended Transceivers Featuring high-quality cooled LAN WDM EML transmitters and high-sensitivity APD receivers, this Cisco QSFP-100G-ER4L-X compatible fiber transceiver is designed for outside plant applications with an extended temperature range (-20 to 85°C). This 100G ER4 extended transceiver is compliant
1310nm LAN WDM QSFP28 100GBASE-ZR4 Optical Transceiver For Cisco QSFP-100G-ZR4-S
Cisco QSFP-100G-ZR4-S Compatible 80 km, λ1296-1309nm LAN WDM, LC-Duplex, Single Mode For 100GBASE-ZR4 Links Description Of Cisco QSFP-100G-ZR4-S Compatible 100GBASE ZR4 Transceivers The 100GBASE-ZR4 transceiver support 100Gbps speed and 80km link distance over single-mode fiber. It is suitable for fiber connectivity in data centers, high-performance computing networks, enterprise cores, distribution layers, and service provider applications. This 100Gbase ZR4 transceiver
QSFP28 40km SMF LC Optical Transceiver Module For Cisco QSFP-100G-ER4L-S
Cisco QSFP-100G-ER4L-S Compatible 100GBASE ER4 Transceiver 40km SMF Module Description Of Cisco QSFP-100G-ER4L-S Compatible 100GBASE ER4 Transceiver The 100GBASE-ER4 optical transceiver is designed for use in 100GBASE Ethernet throughput up to 40km (with host FEC) over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-ER4 Lite standard. Digital diagnostics functions are also available via
QSFP28 CWDM4 Cisco Compatible Transceiver SMF 10km For QSFP-100G-4WDM-S
Cisco QSFP-100G-4WDM-S Compatible 100Gbps CWDM4 10km QSFP28 1310nm SMF Fiber Module Transceiver Description Of Cisco QSFP-100G-4WDM-S Compatible 100G CWDM4 Transceiver The Cisco QSFP-100G-4WDM-S Compatible optical transceiver Module is designed for use in 100GBASE Ethernet throughput to 10km over dual-strand single-mode fiber (SMF) via duplex LC connector. The 100G CWDM4 module converts 4 input channels of 25.78Gb/s electrical data to 4 channels of CWDM4 optical signals and