Display Driver ICs
MAX3232IDR RS-232 Line Driver Receiver 3V to 5.5V 250 kbit/s Dual Channel ESD Protection IC
MAX3232IDR is a multichannel RS-232 line driver/receiver with ±15kV ESD protection. Operates from 3V to 5.5V supply, supports up to 250 kbit/s. Ideal for battery-powered systems, PDAs, and notebooks. Meets TIA/EIA-232-F standards.
TLP250 TOSHIBA IGBT Gate Drive Optocoupler 8-DIP 1.5A Output 2500Vrms Isolation
The TLP250 is a high-speed optocoupler from Toshiba designed for IGBT and power MOSFET gate driving. Features 1.5A peak output, 2500Vrms isolation, and 10-35V supply range. UL1577 certified. Ideal for inverters, air conditioners, and industrial motor drives.
BD9486F-GE2 High Gain Voltage Comparator IC 2-36V for Automotive Industrial
The BD9486F-GE2 is a high reliability voltage comparator IC with wide operating voltage 2-36V. Features low supply current, wide input common-mode range, and automotive grade options. Suitable for industrial and automotive applications requiring precision and durability.
BD6775EFV-E2 Stepping Motor Driver IC 40V 800mA Bipolar PWM for OA Equipment
General-purpose bipolar stepping motor driver IC for OA equipment. Supports 2-phase, 1-2 phase, and W1-2 phase motors. Features synchronous rectifier drive for high efficiency, exposed pad package for thermal management, and adjustable OFF time via external RC. Operating temp -20 to +75°C.
DS90LT012ATMFX 3V LVDS Single CMOS Differential Line Receiver 400Mbps
Single CMOS differential line receiver supporting data rates over 400 Mbps. Features ultra low power, low noise, and input fail-safe for open/short/terminated conditions. Includes integrated line termination resistor for point-to-point applications. Ideal for high-speed interface designs.
CD4040BE CMOS Ripple-Carry Binary Counter Divider IC 20V 12-Stage High-Voltage
High-voltage CMOS ripple-carry binary counter/dividers rated at 20V. Features medium-speed fully static operation, buffered I/O, and common reset. 100% tested for quiescent current at 20V. Ideal for industrial timing and frequency division applications.
SN74LS90N Decade Counter 4-Bit Ripple Type 42 MHz Low Power IC for BCD Binary Counting
High-speed 4-bit ripple counter with divide-by-two and divide-by-five sections. Low power consumption at 45 mW typical, 42 MHz count rate. Supports BCD, bi-quinary, and modulo-12 modes. Includes gated Master Reset and Master Set. Ideal for industrial counting applications.
SN74LS240N Octal Buffer Line Driver 3-State Output Low Power Schottky IC
The SN74LS240N is a low power Schottky octal buffer and line driver with 3-state outputs. Features hysteresis inputs for improved noise margins and input clamp diodes. Ideal for memory address drivers, clock drivers, and bus-oriented transmitters/receivers.
HFBR-4531Z Crimpless Plastic Optical Fiber Connector 2.2mm
The HFBR-4531Z is a crimpless connector for plastic optical fiber, eliminating the need for crimping tools. Made of durable ULTEM plastic, it offers excellent retention force and operates from -40°C to +85°C. Ideal for industrial control, automotive, and medical applications.
IRF7311TRPBF Dual N Channel MOSFET 20V 6.6A HEXFET Power IC Chip
IRF7311TRPBF Dual N-Channel HEXFET Power MOSFET with ultra low on-resistance and fast switching. Rated 20V, 6.6A continuous drain current. Fully avalanche rated, surface mount SO-8 package. Ideal for efficient power management applications.
CA3046 NPN Transistor Array 5 General Purpose 15V 50mA Monolithic IC
General purpose NPN transistor array with 5 monolithic transistors, 15V VCEO, 50mA IC. Features matched pair, low noise 3.2dB, DC to 120MHz. Ideal for amplifiers and low power systems. Military temp range.
SI4835DDY-T1-GE3 TrenchFET Power MOSFET 30V 6A IC Chip for Load Switches
Halogen-free TrenchFET Power MOSFET, 100% Rg and UIS tested. Ideal for load switches in notebook and desktop PCs. Offers 30V VDS, 6A continuous current, and low on-resistance. Reliable and efficient for industrial power management.
SF64 6A 200V Super Fast Recovery Rectifier Diode Axial Lead Electronic IC Chip
High efficiency SF64 rectifier diode with 200V VRRM, 6A average forward current, and 35ns fast recovery. Features low reverse leakage, high surge capability, and UL94V-0 flame retardant epoxy. Ideal for industrial power supplies and switching applications.
Quad Darlington Switch L6221CD 60V 1.8A Non Inverting Inputs with Enable SO16
The L6221CD is a monolithic quad Darlington switch with four non-inverting inputs and a common enable. It supports output voltage up to 60V and current up to 1.8A, featuring low saturation voltage, TTL-compatible inputs, and integral fast recirculation diodes for inductive loads.
KSP2907A PNP General Purpose Transistor 60V 600mA 625mW
PNP epitaxial silicon transistor with VCEO of -60V, collector current up to -600mA, and 625mW power dissipation. Ideal for general purpose switching and amplification. Reliable performance with high durability.
ISO5852SQDWRQ1 Automotive Gate Driver IC 2.7A 5.5A Capacitive Coupling 5700Vrms 16-SOIC
AEC-Q100 qualified gate driver with 100kV/µs CMTI, 2.7A peak source and 5.5A peak sink currents. Features desaturation detection, soft turn-off, and active Miller clamp. Certified to UL, VDE, TUV, and CQC standards for reinforced isolation.
DRV8908QPWPRQ1 AEC-Q100 Half Bridge Driver IC 8 Outputs 6A 24-HTSSOP MOSFET
AEC-Q100 qualified automotive half-bridge driver IC with 8 outputs, 6A peak current, and 4.5V to 32V operating range. Features SPI diagnostics, PWM control, and integrated protection. Ideal for DC motors and general purpose loads.
Texas Instruments TCAN1044AVDRBRQ1 CAN Transceiver 8Mbps Half Duplex 8-SON 3x3
High-speed CAN transceiver from TI supporting 8Mbps data rate with 200mV receiver hysteresis. Operates from 4.5V to 5.5V supply over -40°C to 150°C. ROHS3 compliant, ideal for automotive and industrial networks. Original and new stock with BOM support.
AD7705BRUZ 16 Bit Sigma-Delta ADC 2 Input SPI 16TSSOP Analog to Digital Converter
High precision 16-bit sigma-delta ADC with 2 fully differential inputs and programmable gain up to 128. Features low power dissipation (1mW max at 3V), SPI/DSP interface, and wide operating temperature range. ROHS3 compliant, ideal for industrial and instrumentation applications.
CD4051BQPWRQ1 Analog Multiplexer Demultiplexer IC 8:1 240Ohm 16-TSSOP AEC-Q100
AEC-Q100 qualified automotive analog multiplexer/demultiplexer IC with 8:1 configuration, 240Ohm max on-resistance, and wide 3V to 20V supply range. Features low power dissipation, break-before-make switching, and 20MHz bandwidth. Ideal for automotive signal routing.