Environmental Test Chamber
35db Bacteria Disinfection Door
Face Recognition Infrared Temperature Measurement Bacteria Disinfection Door 35db Face Recognition Infrared Temperature Measurement Bacteria Disinfection Door 700W Description: The intelligent atomization disinfection door has many advantages. It can be full-process, fully automatic, and fully intelligent. This device is powerful. It adopts plasma, ultraviolet, light wave disinfection, 720 ° sterilization and anti-virus technology. The whole body disinfection of the dead
16L Atomization Disinfection Door
Intelligent Atomization Disinfect Door for Hotel and School and Factory Intelligent 16L Atomization Disinfect Door for Hotel and School and Factory 0.5-1m Description: The unit integrates face punching, temperature measurement, mask recognition, and automatic disinfection. It has the advantages of high degree of automation, compact structure, beautiful appearance, convenient operation and maintenance, safety and reliability, etc. It is an ideal whole body disinfection
0-60℃ / Min High Temperature Muffle Furnace For Heat Treatment 1800℃
High Temperature Muffle Furnace Introduction: The equipment is suitable for all kinds of small parts, springs, molds for less oxidation, no decarburization heat treatment.It is also suitable for powder roasting, ceramic sintering, high temperature experiment, chemical analysis, material processing, quality testing and other metal parts heat treatment. Features: 1. Chamber material adopts imported high purity alumina ceramic fiber,which has the advantage of no powder drops off
EN 200 Sanitary Tapwares Flow Test Chamber , EN 817 Water Tap Flow Test Machine
EN 200 Sanitary Tapwares Flow Test Chamber, EN 817 Water Tap Flow Test Machine Applicable: It’s used for water tape, sprinklers, hoses, angle valves, and etc. The flow is not more than 35L/min, dynamic pressure less than 0.6MPa. Parameters: 1. The frame is made of aluminum material, the water for flow test can be recycled to water tank; 2. Water supply: stainless steel water tank, stainless steel multi-stage pump, pipeline; 3. Pressure adjustment: frequency converter to
0-20 m/min Environmental Test Chamber / Industrial Automatic Control UV Curing Machine 2-80 mm
Industrial Automatic Control UV Curing Machine 0-20 m/min Industrial Automatic Control UV Curing Machine 2-80 mm Product Description: The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify. Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed
80 Times / Min Mechanical Shock Impact Tester Equipment For Material Testing 1500mm
Mechanical Shock Impact Tester Equipment for Material Testing 80 times/min Mechanical Shock Impact Tester Equipment for Material Testing 1500mm Application Mechanical acceleration shock impact tester is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products under real environment shock conditions, thus improve and perfect products package structure.
UL1642 Battery Safety Tester / Projectile Burning Testing Equipment AC 220V 50HZ
UL1642 Battery Safety Tester Projectile Burning Testing Equipment Application Battery Burning Tester is suitable for lithium battery , battery pack, mobile phone, notebook computer and other small electronic consumer products battery fire resistance/flammability testing. The main function is to observe a series changes and the impact force size produced by exploding after being heated by flames. Test description: 1. Place the test lithium battery or battery pack on a wire
Blue Environmental Test Chamber , Rubber Plastic Low Temperature Brittleness Test Instrument -80℃~0℃
Rubber Plastic Low Temperature Brittleness Test Instrument 2 m/s±0.2 m/s Rubber Plastic Low Temperature Brittleness Test Instrument -80℃~0℃ Application: The Rubber Plastic Low Temperature Brittleness Test Instrument is the highest temperature when the specimen is damaged under the specified conditions, that is, the brittle temperature. It can be used to compare the performance of the plastic and other elastic materials at low temperature. The brittleness and low temperature
0~30A Environmental Test Chamber , 0～20N Car Universal Windshield Windscreen Wiping Test Equipment Wiper 0～400KPa
Car Accessories Universal Windshield Windscreen Wiping Test Equipment / Wiper Blade Test Machine Application: It is sued for testing the performance and durability of audtormobile wiper and assembly. The test bench can test wiper's wier area, wiper frequency,automatic return, wiper rod's compression force, braking force,wiper effect,system strength and durability. It can simulate ice and snow working condition and durability test. Standard: GB15085-1994,QC/T44-2009,QC/T44
ASTM D4714 Digital Display Environmental Test Chamber / Concrete Carbonization Tester
Digital Display Concrete Carbonation Test Chamber / Concrete Carbonization Test Chamber ASTM D4714 Digital Display Concrete Carbonation Test Chamber /Concrete Carbonization Test Chamber Product Description The concrete carbonization test chamber adopts the original imported carbon dioxide sensor, which adopts the infrared detection principle and combines with the advanced digital instrument, and has the characteristics of high precision and long life.This product has the
Crushing Safety Battery Testing Equipment Ac 380v ± 10% With 300mm Stroke
±1%FS Battery Crushing Safety Extrusion Machine AC 380V ±10% , 50/60Hz Product Description: The battery is to be crushed between two flat surfaces. The force for the crushing is to be applied by a hydraulic ram with a 32mm diameter piston. The crushing is to be continued until a pressure reading of 17.2 Mpa is reached on the hydraulic ram, resulting in an applied force of 13KN.Once the maximum pressure has been obtained it is to be released. A cylindrical or prismatic battery
Li Ion Battery Safety Nail Penetration Test Equipment 150kg - 200kg
150kg-200kg Li-ion Battery Safety Performacne Nail Penetration Test Equipment Application: The machine use for testing the safety performance through the nail Penetration test. After testing, the battery should not catch fire,smoke or explode. It is also an essential testing device for every battery manufacturer and Research Institute. Features: 1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process. 2.Lighting system
6kw Environmental Test Chamber Laptop / Touch Control For Lithium Battery Pack
± 2 ℃ Laptop / Touch Control Lithium Battery Pack Washing Testing Machine 6kw Product description: Lithium-ion battery stack washing up tester, battery lavation tester is suitable for the following batteries or battery packs 1, hand-held electronic products with lithium-ion battery pack 2, may be placed in the pocket to carry or use of portable electronic products with lithium-ion battery pack 3, other portable electronic products can be placed in the pocket to carry the
150mm Environmental Test Chamber Digital Squeezing Battery Test Equipment
150mm Providing Digital Battery Squeezing Test Machine 0.1~ 900mm/Min(Adjustable) Application: Through the extrusion test, The machine use for testing the safety performance through the extrusion/crushing/squeezing test. After testing, the battery should not catch fire,smoke or explode. It is also an essential testing device for every battery manufacturer and Research Institute. Features: 1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame
High Altitude Simulation Climatic Test Chamber Rt - 0.5kpa Pressure -65℃ To +150℃
RT~0.5Kpa Battery high altitude climate simulation chamber -65℃~ +150℃ Product Description: Battery high altitude climate simulation chamber simulates reliable storage and transportation climate of high altitude, sky, plateau area and low pressure high low temperature, it is applied to defense industry, aerospace industry automation components, auto parts, electronics, electrical components, plastic, chemical industry, pharmaceutical industry, food industry and other related
Dustproof Environmental Test Chamber , Motor Vehicle Sand Dust Test Chamber
35~90% R.H Motor Vehicle Environmental Floating Dustproof Sand Dust Test Chamber 50um Product Description: Lab Equipment Motor Vehicle Environmental Floating Dustproof Sand Dust Test Chamber is mainly used for testing control cabinet, household appliances, low voltage electric appliance, automobile, lamps and lanterns, motorcycle parts,ect outer shells. Test chamber pressure can be constant and changed, suitable for indoor low concentration dust pollution test, assessment
Pottery Thermal Stability Testing Chamber For Ceramic Plate 0 - 180 Minutes
0 ~ 180 minutes Daily-use ceramic plate pottery thermal stability testing chamber Daily-use ceramic thermal stability tester is the thermal stability of ceramics for daily use professional testing equipment meets the standard method GB3298-1999.SQ005 daily-use ceramic thermal stability instrument can also test thermal stability for glass products and other silicate products. The main technical parameters: 1. Furnace maximum working temperature: 200oC ; 2.Temperature
Walk In Environmental Test Chamber , Condition Temperature And Humidity Test Chamber
Walk In Environmental test chamber Condition Temperature And Humidity Test Chamber Product Description: Used to test various types of materials for their tolerances under condition of heat, cold, dry, humidity. Application: For all types of electronic products quality inspection , electric appliance, and communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries products. Purpose: This chamber is suitable for
Plc Touch Screen Thermal Test Chamber 3kw With ± 0.5℃ Control Accuracy
(5±2)°C/min Environmental Testing Temperature thermal shock abuse chamber ±0.5℃ Product Description The temperature rises at the predetermined rate to the testing temperature and hold on for some time. Use the hot wind circle to ensure the uniformity of the working temperature. Testing Method: Put the battery sample into the test box with the original temperature of 20±5℃ , then rise the temperature to 130±2℃ at the rate of (5±2℃) per minute. Keep the temperature for 10 min.
-70℃ To +150℃ Climate Control Chamber Ramp Rate Test 304 Stainless Steel Plate
-70℃~+150℃ Capacity Climate Control Chamber Ramp Rate Test Chamber 20%HR ---98%HR Product Description: Ess high ramp rate chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for all types of electronic products,electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical,building materials, medical and aerospace industries. Specification: 1. Circulation: Sirocco fan