Fire Testing Equipment
DX8359F Maximum Temperature Tester For Thermal Insulation Materials
1. Scope of application: It is suitable for the evaluation of the maximum use temperature of insulation products such as loosely filled insulation materials, felts, blankets, blocks, plates and prefabricated insulation tube shells. 2. Conform to the standard: In line with GB/T17430-1998 "Evaluation Method for the Maximum Service Temperature of Thermal Insulation Materials" relevant standards are not equivalent: ASTM C411-82 "Test Method for Hot Surface Performance of High
DX8359A Maximum Temperature Test Device For Thermal Insulation Materials
1. Scope of application: It is suitable for the evaluation of the maximum use temperature of thermal insulation products such as loosely filled insulation materials, felts, blankets, blocks, plates and prefabricated insulation tube shells. 2. Conform to the standard: in accordance with GB/T17430-2015 "Evaluation Method for the Maximum Service Temperature of Thermal Insulation Materials" relevant standards Non-equivalent: ASTM C411-82 "Test Method for Hot Surface Performance
DX8349 Wire & Cable Bundle Combustion Tester
Scope of application: It is used to evaluate the ability of vertically installed bundled wires and cables or optical cables to inhibit the vertical spread of flames under specified conditions, and the use process needs to cooperate with smoke dust removal towers. The whole machine is composed of several parts, such as a test chamber, an air source, a steel ladder, an emission purification system, and an ignition source. Conform to the standard: in accordance with GB/T18380.31
Highly Accurate DX8348A Cone Calorimeter For Fire Resistance Testing
1. Equipment standards: It conforms to the test methods specified in GB/T16172-2007 "Test method for heat release rate of building materials" and ISO5660-1:2002 "Test method for heat release rate of building materials". 2. The scope of use: The oxygen consumption calculated by the oxygen concentration in the gas flow of the combustion product and the heat release rate of the combustion product during combustion, the heat release rate of the material is also the most important
DX8342A Fire Resistance Tester For Building Components
Scope of application: It is suitable for the fire resistance test of building components, and the fire resistance of load-bearing vertical separation components. Operating voltage: AC 380V±10% 50NZ. Furnace body: The test furnace is composed of bricks, steel structure and fireproof and thermal insulation materials. Specimen size: width 300mm× height 300mm (can be customized). The dimensions of the furnace are approximately: Vertical furnace: L3.2m× W2.2m× H4.0m Horizontal
Electric Wire Bend Fire Testing Equipment For Metal Wires Steel Aluminum
Electric Wire Bending Resistance Testing Machine for Metal Wires Technical Parameters: 1. The sample diameter Φ0.3-φ10mm 2. The length of the sample 150-200mm 3. Bending angle ±90° 4. Bending speed < 60 times / min 5. Count range 0-9999 6. Motor power 1.1kw 7. The size of 1000*600*330mm 8. Test machine weight 110Kg Test method: It is suitable for repeated bending test of metal wire with diameter or thickness of 0.3mm-10mm. Repeated bending test is to fix one end of test piece
Horizontal Fire Testing Equipment , Foam Vertical Flammability Chamber
ISO 3582 and UL94 Foam Vertical Horizontal Burning Flammability Testing Equipment Scope of application: Applicable to evaluate the relative burning performance of small samples of foam (foam rubber) under laboratory conditions. Compliance with the standards: The HBF, HF-1, and HF-2 test standards comply with GB8332, GB8333, ISO 3582, and UL94. The main parameters: 1. Test chamber size: length 600mm, width 300mm, height 760mm 2. Timer: 0 ~ 99.99S arbitrary settings. 3.
Wire Cable Fire Testing Machine , Vertical Flame Test Chamber Fiber Cable
Vertical Single Cable Burning Fire Resistance Test Equipment , Wire Cable Testing Machine Scope of application: Applicable to the flame retardation test of a single wire or cable or fiber cable under the specified flame conditions. At the same time, it can be used to test the burning of drip objects under flame conditions. Comply with the standards: in line with GB/T18380.11-2008, GB/T18380.12-2008, GB/T18380.13-2008, IEC60332-1-1:2004, IEC60332-1-2:2004, IEC60332-1-3: 2004
Rock Wool Thermal Load Testing Equipment PLC Touch Screen Control
PLC Touch Screen Control Thermal Insulation Rock Wool Thermal Load Testing Equipment Application: Suitable for rock wool, slag wool and glass wool and products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage. Through calculation, the shrinkage temperature of the heat load is determined by interpolation. Meet the standards: in line with GB/T11835 standards. Technical parameters The heat load test device consists
Electrical Plastic Testing Equipment Combustion Performance Hot Rod Method
Hot Rod Method Plastic Combustion Performance Testing Equipment Applicable standard: GB/T 2407-2008 Plastics combustion performance test methods. Main application: It is suitable for the determination of plastic burning performance test with hot rods. Test method: Using a hot rod with a diameter of 8mm and a length of 100mm and a temperature of 950-960°C as the ignition source, make contact with the end face of the sample for 3min, and then hold the hotrod away from the
Automatic Fire Testing Equipment , Oxygen Index Test For ISO4589 Standard
Oxygen Index Tester , OI Testing Machine for ISO4589 standard Application: It is the difficulty of determining the burning of materials in contact with a flame in the air. Suitable for homogeneous solid materials, laminates, films and film materials. This machine is designed according to GB/T2406 "Plastic combustion performance test methods - oxygen index method" standard. Compliance with the standard: Compliance with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589, GB/T2406
ISO11925-2 Ignitability of Building Material Direct Impingement of Flame Single-Flame Source Testing Equipment
ISO 11925-2 Single-flame Source Test Apparatus Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: GB/ T 8626-2007 GB/ T 10801.2-2002 EN ISO 11925-2 DIN 4102 Technical parameters: Inner dimensions of the combustion chamber 700 x 400 x 810mm Material mirror stainless steel Open area 25 * 25mm, height: 50mm Burner burner by the aperture of ¢0.17 mm of nozzle and regulating valve,
Textiles Damaged Length, Afterglow Time And Afterflame Time Flame-retardant Test Machine
EN 1103 ISO 6941 Textile Vertical Flame-retardant Performance Testing Equipment Application: It is mainly used for testing the flame retardant performance of flame retardant clothing and other flame retardant textiles. It is widely used in special labor protection supplies supervision and inspection stations, safety production research institutes, product quality inspection institutes, and flame retardant clothing production enterprises. Main features: 1. Combustion test box:
Resistance Materials Fire Testing Equipment , Fire Test Chamber For Conveyor Belt Alcohol Burner
Conveyor Belt Alcohol Burner Burning Test Chamber , Materials Flame Resistance Testing Machine Main application: Mainly used for idler, conveyor belt, fire-retardant conveyor belt for coal mines, polymer products for coal mines, plastic pipes for coal mines, rubber pipes for coal mines, hoses and hoses for hydraulic supports, and coal mines. Wire rope traction conveyor belts, steel wire rope conveyor belts for coal mines, rubber buffer rollers for coal belt conveyors, and
Fire Safety Helmet Flame Retardant Performance Tester
Fire Safety Helmet Flame Retardant Performance Tester Scope of application: It is widely used in safety helmet production enterprises, major quality inspection units and construction engineering testing stations. Performance characteristics: 1. Electronic ignition; automatic timing positioning of burner. 2. Ignition time: 0-999.9 seconds, arbitrary setting, afterburning time, smoldering time are automatically recorded, digital display. 3. Flame height: adjustable, with flame
Digital Fire Test Chamber , Mask Resistance Flame Test Equipment EN137
EN137 Mask Flame Resistance Testing Machine , Fire Testing Chamber Features: Automatic timing, digital display Comply to standard: GB/T16556, EN137:2002 Parameters: 1. Ambient temperature: -5 °C -30 °C 2. Relative humidity: ≤85% 3. Supply voltage and power: 220V ± 10%, 50HZ, 100W; 4. The burner flame 250mm temperature of 950 °C ± 50 °C 5. Adjustable flame time steplessly adjustable 6. Air source: propane 7. Test sample: mask. Test steps: 1 Turn on the instrument's power
DX8342 Flammability Testing Machine For Fireproof Building Materials
Executive standard: in line with GB/T8626-2007 "Test Methods for Flammability of Building Materials’ GB/T10801.2-2002"Extruded Polystyrene foam for Heat insulation (XPS)" 适用范围:主要适用于在规定条件下判断建筑材料是否具有可燃性试验方法. Scope of application: It is mainly applicable to the test method for judging whether building materials have flammability under specified conditions Technical Parameters: 1. The inner size of the combustion box: width 700× depth 400× height 810mm 2. Material: mirror
DX8341 Building Material Flame Retardancy Tester
Conform to the standard: meet the requirements of GB8625 and DIN4102 "Test Methods for the Flame Retardancy of Building Materials". Scope of application: It is mainly applicable to determine whether the building materials are flammable under the specified conditions, and all materials that have passed the combustion shaft furnace test and can pass the flammability test of building materials can be determined as flammable building materials. Technical Parameters: Combustion
DX8339 Fire Retardant Coating Combustion Tester Daban Method
Scope of application: Under specified conditions, the test method for testing the flame resistance characteristics of the facing fire retardant coating coated on the surface of the combustible substrate is also suitable for the determination of the flame resistance time of the facing fire retardant coating Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix A) test standard. Test station: 1 station Temperature uniformity: ±2.5°C Specimen size: L900
DX8337 Automotive Interior Material Combustion Tester
Meet the standards: in line with GB8410, American Standard FMVSS571.302, DIN7520 "Combustion Characteristics of Automotive Interior Materials". Test method: the specimen is clamped horizontally on the U-shaped support, and after igniting the free end of the specimen with a flame of the specified height in the combustion chamber for 15S, determine whether the flame on the specimen is extinguished, as well as the distance of the specimen burning and the time taken to burn the