Fire Testing Equipment
Rock / Slag Wool Thermal Insulation Testing Equipment GB/T11835 3500W
GB/T11835 Rock wool,slag wool and its products for thermal insulation Testing Equipment Product Description: Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated. Standard: GB/T11835 Model: DX8359
IEC60243-2 50kva Electrical Strength Test Machine For Solid Insulating Materials
50KV Electrical Strength Test Machine for Solid Insulating Materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: IEC60243-1:Test method for electrical strength of solid insulating materials -- test under power frequencytest standards. GB1408.1:Electrical dielectric
ISO 9151 Protective Clothing Heat Transmission Tester Electronic Power ASTM D 4108
ISO 9151 Protective Clothing Heat Transmission Tester BS EN 367 Product Description: Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index provides a method of grading materials which does not imply that the material tested will give any precise protective time under actual use conditions. Application: Safety
Single - Flame Source Testing Equipment Equipped With Manual Adjustable Damper Device
ISO 11925-2 Ignitability of Products Subjected to Direct Impingement of Flame Single-flame Source Testing Equipment Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standards: EN ISO 11925-2 GB/ T 8626-2007 GB/ T 10801.2-2002 DIN 4102 Technical parameters: Inner dimensions of the combustion chamber 700 x 400 x 810mm Material mirror stainless steel Open area 25 * 25mm, height: 50mm Burner
Silver Color Fire Testing Equipment IEC60332 Wire and Cable Bundle Combustion Tester
Inhibit Vertical Flame Spread Wire And Cable Bundle Combustion Tester Application: Used to evaluate the vertical installation of bundles of wire cables or optical cables under specified conditions to inhibit the vertical spread of flame.The whole machine is composed of test box, air source, steel ladder, emission purification system and ignition source. Product description: The machine is designed and manufactured according to standard requirements such as GB12666.5, GB18380
EN 1103 ISO 6941 Textile Fire Testing Equipment Vertical Flame Retardant Performance Testing
EN 1103 ISO 6941 Textile Vertical Flame-retardant Performance Testing Equipment Application: It is applicable to the determination of flame-retardant properties such as woven fabrics, knitted fabrics, apparel fabrics, decorative fabrics, tent fabrics, coated products, laminated products, etc. Meet the standards: GB/T5455 "vertical test of textile burning performance", ISO 6940 "textile fabrics. Combustion properties. Determination of vertical flammability of the sample", ISO
ISO 9239-1 Fire Testing Equipment Gas - Fired Radiant Panel ASTM E970
ISO 9239-1 Gas-Fired Radiant Panel ASTM E970 Gas-fired radiant panel -The source of radiant heat energy shall be a panel of porous refractory material mounted in a metal frame, with a radiation surface of (300±10)mm×(450±10)mm. -The panel shall be capable of withstanding temperatures up to 900ºC and use a fuel gas/air mixing system with suitable instrumentation (see Annex C) to ensure consistant and repeatable operation. -The radiant heat panel is placed over the test
ISO 1182 Fire Testing Equipment / Micro Computer Non Combustibility Tester Electronic Power BS 476-4
BS 476-4 Micro Computer Non-Combustibility for Material Application: When a certain amount of gas is supplied to the box and the standard ignition source is used to ignite the flame, this instrument can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed bundles of wire, cable or optical fiber cable. Standards: - BS 476-4 - EN IS01182 - GB/T 5464 - ASTM E136[3] Main parameters: The test
220V Fire Test Chamber , Ignitability Of Building Material Subjected To Direct Impingement Single - Flame Source Tester
ISO 11925-2 Flammability Tester For Fireproof Building Materials ISO 11925-2 Ignitability of Building Material Subjected to Direct Impingement of Flame Single-Flame Source Tester Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standards: GB/ T 8626-2007 GB/ T 10801.2-2002 EN ISO 11925-2 DIN 4102 Technical parameters: Inner dimensions of the combustion chamber 700 x 400 x 810mm Material
UL94 Plastics Horizontal And Vertical Burning Tester ASTM D65
UL94 Plastics Horizontal and Vertical Burning Testing Machine Introduction: It is suitable for testing the noncombustibility of plastics or films under the direct combustion of specified fire source to judge the fireproof grade of plastics. Stadards: UL94,ASTM D65,D4804,D3801,ISO1210,IEC60707, GB2408,GB13488 Main feature: Laboratory fume hood: inside volume 0.5m3 chamber permits observation of tests normal thermal circulation of air during burning inside surface should be
Dielectric Strength Test Machine For Insulating Materials IEC60243-1
Electrical Strength Test Machine for Solid Insulating Materials Electrical Strength Test Machine for Solid Insulating Materials IEC60243-1 Summary: The electrical dielectric strength tester main test the short-time electric strength of solid insulating materials at power frequencies between 48Hz and 62Hz. Standards: GB1408.1:Electrical dielectric strength test instrument IEC60243-1:Test method for electrical strength of solid insulating materials -- test under power
IEC60243-2 Electrical Strength Test Machine For Solid Insulating Materials
Electrical Strength Test Machine for Solid Insulating Materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB1408.1:Electrical dielectric strength test instrument IEC60243-1:Test method for electrical strength of solid insulating materials -- test under power
50Hz AC Contactor Life Test Device IEC60947-4-1-2000 White Color
AC Contactor Life Test Device IEC60947-4-1 Use of equipment: The equipment is used to test the action characteristics of AC contactors and detect the overrun, synchronization error, total stroke, current and voltage of AC contactors. Standards: - GB14048.4 - GB/T14048.1 - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can conduct electrical life test on single-phase ac contactor contacts; 2. 5 station work at the same time, at the same time in the same load
NF P 92-501 Building Material Radiation Test Machine 220V 50Hz 10A TB/T 2639.1
NF P 92-501 Building Material Radiation Test Machine TB/T 2639.1 Overview: Building material radiation test machine is professional designed to evaluate the M rating of rigid or flexible materials thickness more than 5mm in order to determine the reaction to fire of building materials. The test apparatus is designed according to requirement of NF P 92-501. This apparatus is to determine the flammability of M0-M4 and combustion developing speed of the samples which won’t melt
ASTM D2863 ISO 4589-3 Plastics Burning Behaviour Oxygen index Ambient Temperature Testing Equipment
ASTM D2863 ISO 4589-3 Limiting Oxygen Index Test Equipment Application: The minimum concentration of oxygen that will just support flaming combustion in a flowing mixture of oxygen and nitrogen. A specimen is positioned vertically in a transparent test column and a mixture of oxygen and nitrogen is forced upward through the column. The specimen is ignited at the top. The oxygen concentration is adjusted until the specimen just supports combustion. The concentration reported
Solid Insulating Materials Electrical Strength Test Machine IEC60243-1 1 Year Warranty
Electrical strength test machine for solid insulating materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB1408.1:Electrical dielectric strength test instrument IEC60243-1:Test method for electrical strength of solid insulating materials -- test under power
ASTM E 1537 Heat Release Rate Tester / Large Calorimeter ISO 9705
China ASTM E 1537 Heat Release Rate Tester/Large Calorimeter Scope of application: 10MW Heat Release Rate Tester applicable to buildings and large complexes (including locomotives, vehicles, furniture, warehouses and construction methods), as well as extensive testing and verification of fire performance of raw materials, buildings and solid models. Standards: - ISO 9705 - ISO 13784-1 - ASTM E 1537 - EN 14390 - ISO5660-1 Structures: - The equipment consists of an ignition
ISO 1182 Micro Computer Non Combustibility Tester Electronic Power BS 476-4
EN IS01182 Micro Computer Non-Combustibility for Material BS 476-4 Application: When a certain amount of gas is supplied to the box and the standard ignition source is used to ignite the flame, this instrument can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed bundles of wire, cable or optical fiber cable. Standards: - BS 476-4 - EN IS01182 - GB/T 5464 - ASTM E136[3] Main parameters: The
EN13381-8 Horizontal Construction Materials Testing Equipment For Building Component BS 476
EN13381-8 Horizontal Building Component Fire Resistance Test Furnace Scope of application: Applicable to all kinds of structural components such as walls, doors, sliding doors, no doors, windows, columns, shutter doors, fire smoke exhaust valve, in the standard fire conditions to determine its fire resistance. Standard: EN13381-8 ISO834-1:1999 ISO834-5:2000 ISO834-6:2000 Technical parameters: Laboratory 4.2m (length) x3m (width) x1.5m (height) Gas tank capacity ≥50kg x 6
SGS Vertical Single Cable Burning Fire Resistance Test Equipment IEC60332-1
SGS Vertical Fire Testing Equipment , Single Cable Burning Fire Resistance Test Detailed Product Description Material: Stainless Steel Standards: IEC60332-2-1:2004, IEC60332-2-2:2004 Application: Single Wire Or Cable Or Fiber Cable Fuel: Gas Methane Scope of application: Applicable to the flame retardation test of a single wire or cable or fiber cable under the specified flame conditions. At the same time, it can be used to test the burning of drip objects under flame