IEC62368 Test Equipment
MS2520PN Program Control Ground Resistance Tester
1.1 Product introduction The MS2520PN program control ground resistance tester is a safety regulation performance tester developed by the Company. It is mainly used to measure the resistance of conductors under strong current. The current output of the tester is constant current source output, that is, within the test range of the instrument, the output current does not change with the external load resistance, and the output current is the preset current value. 1.2
Load Machine
Load machine KP-FZ012 This load machine is designed and processed in accordance with Table 17 in GB15092.1-2010 and Figure 9a in Chapter 7.1.2.3, and the peak surge current is designed and processed in accordance with Table 14 in Chapter 14.6.5 in GB8898.1-2011 and Figure 10 in GB15092.1-2010. The special load machine is mainly used for detecting resistive and capacitive load to test the switch. technical parameter: 1. Input power: AC220±10%, 50Hz 2. Voltage output: AC 0~300V
Iphone Roller Rolling Tester Instrument
HD-RC-001 roller rolling tester Instrument description: This instrument is designed and processed according to the customer's DC line test standard 080-1276- K, which is mainly used to detect the rolling ability of DC wire against seat casters. The casters of the simulated office seats are repeatedly rolled on the wires to judge the times life of the wires to resist rolling. Using motor drive, the instrument has the function of judging bad products. When the product is rolled
Iphone Cable Pinch Tester Instrument
HD-CP-001 Cable Pinch Tester ,Cable Extrusion Testing Machine Instrument description: This instrument is designed and processed according to Chapter 7.8 of the APPLE DC line test standard 080-1276- K, which is mainly used to detect the anti-clamping and crushing ability of DC wire. Simulate the damage of wires after being squeezed by sharp objects such as drawers, doors or tables. Main technical parameters: The drop height :0-200 mm adjustable, and the system can select 90 mm
Apple Iphone Cable Impact Tester Instrument
HD-CI-001 Cable Impact tester Instrument description This instrument is designed and processed according to the APPLE DC line test standard 080-1276- K, which is mainly used to detect the ability of DC wire to be impacted by sharp objects. Simulate sharp objects fall on the wire to see if the wire is damaged. Main technical parameters: Arm weight :360 g Impact unit weight: g 590 General weight of pendulum :950 g( Remove shaft) Initial impact distance :25.4 cm (10inch, subject
Iphone Charging Line Rotating Test Instrument
HD-6159E Apple Charging Line Rotating Test Instrument Product Description: HD-6159E instrument is suitable for testing the service life of wire and plane in a certain taper rotation, and simulating the service life of the tested product under certain load and load conditions. The instrument has a low voltage and high current load. External transients can be used to test the transient phenomenon of the product. Technical parameters: Control mode: servo motor PLC touch screen.
IEC61588 / 60065 Mandrel Test Equipment For Insulation Material Layer Abrasion Test
IEC61588 / 60065 Mandrel Test Device for Insulation Material Layer Abrasion Test This Mandrel Test Device according to IEC61588 Fig 6 /IEC60950 appendix and IEC60065/GB19212 standard relate clause design manufacture dedicated instrument. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the specimen and subjected to a pull
Professional IT Test Equipment Reel Test Apparatus Easy Operate
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the pole when the wire was winding. At the same time, avoid that Stretching and twisting with the wire. With 1 r/s ~ 3 r/s rotary the handwheel to winding , continuous to winding ten laps. After the winding, In accordance with the standard requirements to record and reportChange the
High Precision IT Test Equipment Curvature Radius Test Apparatus LCD Display
Curvature Radius Test Apparatus Functional description This test chamber is our company according to IEC60950-1:2005&GB4943.1-2011 standard NO.328 clause require to design manufacturer.This optical instrument test equipment is use for test of information technology equipment product’s meander & radius.The equipment is sample using that enlarge the samples may be adjusted in the computer test sample position scale with Intelligent optical measuring instrument, it can measure
KP-NH12 Av Test Equipment , Covering Scratch Tester PLC Control
Covering Scratch Tester Product details: The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests. The scratches are made by means of a hardened steel pin, the end of which has the form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0
RDL-318 Television Transmission System , Digital Tv Signal Tester
RDL-318 TV Signal Transmission System 1 General 1.1 Introduction: The product is used to test digital TV. It provides test signals for the experiment of TV test. The product can produce test signal of CVBS, YPbPr, SDI, HDMI and RF antenna interface to meet the test requirements of major TV interfaces. 1.2 Application: 1. TV energy efficiency testing； 2. TV display performance testing； 3.TV other testing； 1.3 Features: 1.3.1 Video signal: Interface Composite,Component(YPbPr)
IEC 62368-1 Annex G.8.2.2 Standard Varistor Overload Tester with 900*800*1550mm Size
IEC 62368-1 Annex G.8.2.2 Varistor Overload Tester 1. IEC 62368-1, Annex G.8.2.2 2.Voltage Vr: 240V, 2Vr:480V, resistance accuracy ±3% R1 (16*Vr) : 16*240=3840Ω, current: 2Vr/R1=0.125A; 8x resistance R2 (8*Vr) : 8*240=1920Ω, current: 2Vr/R2=0.25A; 4x resistance R3 (4*Vr) : 4*240=960Ω, current: 2Vr/R3=0.5A; 2x resistance R4 (2*Vr) : 2*240=480Ω, current: 2Vr/R4=1A; 1x resistance R5 (1*Vr) : 1*240= 240ω, current: 2Vr/R5=2A; 0.5 x resistance R6 (0.5*Vr) : 0.5*240=120Ω, current:
Three Vertical Bar Video Signal Generator IEC62368 RDL-100
IEC62368 Three Vertical Bar Signal RDL-100 video signal generator 1 Overview 1.1 Product Profile The product is used for the testing of digital TV, providing a test signal for television test experiments.The product can produce the video test signals for the CVBS, YPbPr and HDMI interfaces to meet the requirements of the TV test. 1.2 Application field: 1. TV safety test experiment; 2. TV electromagnetic compatibility test experiment; 3. Other related test experiments of TV
KINGPO Leakage Current Box 3 In 1 For DC To 1MHz & 100Hz Testing
KINGPO Leakage Current Box 3 in 1 for DC to 1MHz & 100Hz Testing Leakage Current Network Compliant To IEC 1010 Fig. A.1, A.2 And A.4. Leakage Current Box 3 In 1 (DC to 1MHz, DC to 100Hz & Wet Contact) The KINGPO Leakage Current Box 3 in 1 is a state-of-the-art testing solution designed for precise and reliable measurement of leakage current in compliance with international safety standards. Engineered for versatility, this compact device integrates three distinct leakage
IEC62368 1500A Restricted Short Circuit Tester
IEC 62368 1500A Restricted Short Circuit Tester Technical Specification In today's highly interconnected digital world, ensuring the safety of electronic devices is paramount. As a safety engineer or product manager, you understand the critical importance of conforming to international standards. Our IEC 62368 1500A Restricted Short Circuit Tester is meticulously designed to meet the rigorous requirements of the IEC 62368-1 standard, making it your ideal solution for
IEC62368-1-Annex C Standards ISO 179 Charpy Impact Tester and ISO 180 Izod Impact Tester Testing Equipment
IEC 62368-1 Annex C ISO 179 Charpy impact tester , ISO 180 Izod impact Tester Product Introduction Digital Charpy/Izod Impact Tester is used to test the impact toughness of the non-metallic materials such as rigid plastic, reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, plastic appliance and insulation materials. It is widely used in the scientific research institutes, universities and chemical industry as the common quality test equipment. Main
IEC 62368-1 Figure D.3 Electronic Pulse Generator Industrial
IEC 62368-1 Figure D.3 Electronic Pulse Generator for Industrial Use Durable Electronic Pulse Generator IEC 62368-1 Figure D.3 Compliant for Industrial Applications. This electronic pulse generator is designed for industrial applications and complies with IEC 62368-1 Figure D.3 standards, ensuring reliable performance in demanding environments. Electronic pulse generator, IEC 62368-1 Figure D.3 compliant Side view of electronic pulse generator
CS19010 Series Partial Discharge Tester IEC62368 G.5.4 Compliant High Voltage PD Testing Equipment
CS19010 Series Partial Discharge Tester | IEC62368 G.5.4 Compliant High Voltage PD Testing Equipment What is the CS19010 Partial Discharge Tester? | Comprehensive PD Measurement Tool The CS19010 Series Partial Discharge Tester is a state-of-the-art high voltage partial discharge tester designed for rigorous testing of insulation integrity in devices such as high voltage isolation ICs (e.g., optocouplers, magnetic couplers, isolation amplifiers, digital communication chips),
IEC62368 G.9/Table G.11 Integrated Circuit IC Current Limiters Tester Ensure Compliance and Safety
IC current limiter tester product introduction: high performance IC current limiter performance test equipment The IC current limiter tester launched by Kingpo Technology Development Limited is an advanced device designed for verifying the performance of IC current limiters. This IC current limiter tester is based on the latest industry standards (such as Appendix Table G.11) to achieve fully automated testing, ensuring high accuracy and efficiency of IC current limiter
UV Radiation Test Equipment , Xenon Test Chamber Long Lamp Life 1200h
UV Radiation Test Equipment , Xenon Test Chamber IEC62368-1 Standard requirement: C.2 UV light conditioning test C.2.1 Test apparatus Samples are exposed to UV light by using one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel temperature of 63 °C ± 3 °C in a relative humidity of (50 ± 5) %; or – a xenon-arc (see C.2.4) with continuous exposure for a