IP Testing Equipment
CEN/TR 14920 Figure 1 Moving Jet Test Ceramic Nozzle for Testing Jetting Resistance Of Drain And Sewer Pipes
Jetting resistance of drain and sewer pipes - Moving jet test method CEN/TR 14920:2005 Figure 1 Ceramic Nozzle CEN/TR 14920:2005 Pressure: 12±0.2 Mpa Flow 46±0.5L/min Gauge 10[-2,0]mm Angle 30±1° Speed 1m±0.1m/min Nozzle diameter φ2.8±0.02mm
DIN 19523 Figure 1 Ceramic Nozzle For Determination Of Jetting Resistance Of Components Of Drains and Sewers
Requirements and test methods for determination of the jetting resistance of components of drains and sewers Ceramic Nozzle-DIN 19523:2008 Figure 1 DIN 19523:2008 Pressure: 15 Mpa Flow 35.7 L/min Gauge 10[-2,0]mm Angle 30±1° Speed 0.2m±0.02m/min Nozzle diameter φ2.5±0.02mm
IEC60529 IPX6K IP Test Equipment with Adjustable Drip Height and Stainless Steel Construction for Ingress Protection Testing
IEC60529 IP Test Equipment Complete IPX1 to IPX8 waterproof testing system designed for electrical equipment ingress protection certification according to IEC60529 standards. System Overview This comprehensive waterproof testing equipment is manufactured in strict compliance with IEC60529 standards for IPX1 to IPX8 testing. The system includes pre-programmed standard test protocols and customizable user-defined programs to accommodate various testing requirements. The loading
Kingpo Splash Test Apparatus Iec 60335-2-49 Figure 101 Long Using Life
Kingpo Splash Test Apparatus Iec 60335-2-49 Figure 101 Long Using Life Splash test apparatus IEC 60335-2-49 figure 101 The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes up 150 mm above the bottom of the bowl. The bowl is placed on the floor for appliances normally used on the floor. For all other appliances, on a horizontal support 50 mm below the lowest edge of the appliance, the bowl is so moved around as
Automatic IP Testing Equipment Water Spray Tester With Calibration Certificate
Water Spray Tester-IP3/4 Function Description The chamber is applicable to check whether the device and components are ensured good performance when electrical product and its outer case are sealed in a raining environment,which is of scientific design and vividly simulate various environment like water spraying and splashing.Comprehensive stepping control system and stepping technique make swivel angle of rainfall sample rack,sway angle of spray pendulum and its frequency
ISO20653 Ingress Protection Test Equipment ISO 20653 IP Testing Equipment
Ingress Protection (IP) Testing Performance Testing against Water and Dust Ingress Ingress Protection (IP) testing to IEC standard 60529, NEMA 250 testing, and UL 50E testing. Both UL testing and IP testing are typically performed on enclosures to determine the level of protection they provide against water, dust, ice, etc. Ingress Protection (IP) Testing IP testing rates and classifies the degree of protection the product provides against the intrusion of solid objects (i.e.
IEC 60529 IPX5/IPX6 Tester , IP Testing Equipment
IEC 60529 IPX5/IPX6 Tester , IP Testing Equipment Technical Parameters: 1 Control system: PLC controlled 3 IPX5 nozzle diameter: φ6.3 mm 4 IPX6 nozzle diameter: φ12.5 mm 5 IPX5 water flow: 12.5±5% L/min 6 IPX6 water flow: 100±5% L/min 7 Water pressure: adjustment 8 Water flow : adjustable 9 Jet nozzle fixed type: hand-held/ Have a support 10. Core of the substantial stream: IPX5: 40 mm diameter at 2.5 m distance from nozzle,IPX6 :120 mm diameter at 2.5 m distance from nozzle
ISO20653 IPX4K Rain Test Chamber with PLC Program Control Adjustable Drip Height and Stainless Steel Construction
ISO20653 IPX4K Rain Test Chamber Professional IPX4K waterproof testing equipment designed for road vehicle electronic and electrical components, compliant with international standards including GB 4208-2017, GB T2423.38-2008, ISO20653, and DIN_40050-9. Key Features & Specifications Main Test Chamber Inner Box Size: 1 cubic meter Pendulum Radius: R400mm Nozzle Aperture: φ0.8mm Spacing Between Holes: 50mm Number of Nozzles: 25 Swing Angle: ±180°, ±60° or customizable Pendulum
IPx1x2 Professional IP Testing Equipment Drip Test Chamber 600*600mm
IPx1x2 Drip Test Chamber Description: This test chamber is use to verify protection against drip water; second characteristic numeral 1 and 2(drip test) accord to IEC60529. Specifications: Product: IPx1x2 drip test chamber Model: KP-IPx102 Internal size: 800*800*800mm Outer size: 1000*1200*1700mm Drip area: 600*600mm Distance from drip box to test sample: 200mm Drip hole aperture: 0.4mm Distance from each hole: 20mm Drip rate: 1mm/min or 3mm/min adjustable Test time: 1
IP Testing Equipment IEC 60529 Test Rod 2.5mm With Calibration Certificate
IEC 60529 Test Rod 2.5mm, IP3X Production info: Ø2.5mm, 100mm long It conforms to IEC60065, IEC60529, IEC61032 This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Professional IP Testing Equipment IEC 60529 Test Sphere With Handle 50mm
IEC 60529 Test Sphere 50mm, IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand.
Kingpo 4 Ways Smart Control Waterproof Test Machine 1100*1200*1500mm
Waterproof Test Water Supply System The device is used to supply water for waterproof test IPX1 to IPX6. Specifications: Volume: 100L Flow control: smart control, select and preset on control cabinet Big flow pump: 0-7cbm/h (manual control regulator) Small flow pump: 0-3cbm/h (preset on control cabinet, digital controller adjust) Flow control: digital flow meter real-time monitor, frequency convertor control water pump speed (from IPX1 to IPX6) IPX6 flow control: manual
Dielectric Strength Tester
Dielectric Strength Tester Items Model Description Standard Dielectric strength tester KP-DST pole diameter: 5 ± 0.1mm Metal club weight: 100 ± 2g Max measure rang: 20mm Max strength: 35mm Standard: IEC60065, GB8898, UL1310 IEC60065
IEC 60529 Water Spray Nozzle , Spray Jet Nozzles Aluminium Moving Shield
IEC 60529 Spray Nozzle , IPX3/IPX4 Technical Parameter: 121 holes of 0.5mm; 1 hole at the center 1 inner circles of 12 holes at 30°pitch 4 outer circles of 24 holes at 15°pitch Moving shield - Aluminium Spray nozzle - Brass Hand-held device to verify pretection against spraying and splashing water; second characteristic numeral 3 and 4(spray nozzle)
IP Testing Equipment with Oscillating Tube for IPX3 IPX4
IP Testing Equipment with Oscillating Tube for IPX3 IPX4 Tests Product Attributes Attribute Value Warranty 1 Year Interface Type Ethernet Product Name IP Testing Equipment Power Supply AC/DC Dimensions 200 X 200 X 100 Mm Manufacturer ABC Company Weight 2 Kg Product Type Testing Equipment Product Description The IP Testing Equipment is designed to evaluate the performance of electrical and electronic products according to IPX1-8 standards. Equipped with an oscillating tube
Aluminum Shelf UL Rain Test Apparatus with 1 Hour Test Time
UL Rain Test Apparatus Test Equipment: UL Rain Spray Test Apparatus for Outdoor electrical enclosure waterproof test Applicable Standards: UL1598 / CSA250, UL50E / CSA 94.2, UL 8750 / CSA 250.13, etc. and IEC/EN standard requirements. Applications: For test laboratory, manufacturer or product designing use, to check the enclosure waterproof of Outdoor installed equipment, such as Street Lighting fixtures and Control panels etc, similar to IEC 60529 IP Code testing. Specificat
IPX9K Water Spray Test Chamber，8Mpa-10Mpa IPX9K Test Equipment
IPX9K Water Spray Test Chamber 1.This tester is for Waterproof Ingress protection grade testing. 2. Technical Parameters Item Parameters Working Volume 1000*1000*1000mm Test Water Temperature 80±5 ℃ Spray Pressure 8Mpa～10Mpa (adjustable) Spray Flow 14L/min～16L/min (change according to pressure) Nozzle Number 4 (0°,30°,60°,90°) Nozzle Size According to standard graphics, meet standards Spray Distance 100～150mm (adjustable) Nozzle Spay Time 0-99,9s(can be set) Spray Sequence
IPX9K Water Spray Test Chamber , 8Mpa-10Mpa IPX9K Test Equipment
IPX9K Water Spray Test Chamber 1.This tester is for Waterproof Ingress protection grade testing. 2. Technical Parameters Item Parameters Working Volume 1000*1000*1000mm Test Water Temperature 80±5 ℃ Spray Pressure 8Mpa～10Mpa (adjustable) Spray Flow 14L/min～16L/min (change according to pressure) Nozzle Number 4 (0°,30°,60°,90°) Nozzle Size According to standard graphics, meet standards Spray Distance 100～150mm (adjustable) Nozzle Spay Time 0-99,9s(can be set) Spray Sequence
UL Rain Test Water Spray Nozzle.UL60507-ENGL 1999 ANSI Z21.58 CSA4.3-2004 Water Spray Nozzle For Rain Test Apparatus
UL Rain Test Water Spray Nozzle The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, cabinets, electrical components and other products under simulated rainy weather conditions. After testing, the performance of the product can be judged by verification, so as to facilitate the design, improvement, verification and factory inspection of the product. UL Water Spray Test Device is designed
UL 1598 Sprinkler Test Apparatus with Aluminum Shelf
UL 1598 Sprinkler test apparatus spray head