Electrical Safety Test Equipment
Electrical Safety Test Equipment Condensation Tester Insulating Nylon Plate Material
Condensation Tester Brief Introduction:test defrosting time and water evaporation after refrigerator’s freezer is turned off light Meet standard:meet requirements of GB4706.13,IEC60335-2-24 Chapter 11 Technical Parameters material:insulating Nylon plate Power:max 6W； Heat conduction transfer:red copper
Red Copper Electrical Safety Test Equipment Water Evaporation Device
Water Evaporation Device Brief Introduction applied to not resulting in excessively high temperature in temperature-rise test of refrigerator and freezer during defrosting system works;also applied to condensation of refrigeration tool. Meet standard:meet requirements ofGB4706.13,IEC60335-2-24Chapter 11 appendix Technical Parameters material:insulating Nylon plate Power:0.5-12W adjustable； Heat conduction transfer:red copper
Customized Electrical Safety Test Equipment Temperature Measurement Test Corner
Electrical Temperature Measurement Test Corner IEC60335-1:2004 Electrical Appliance Tester Temperature Measurement Test Corner Product information: The temperature measurement corner conforms to the standard requirement of IEC60335-1:2004 chapter 11. It is designed and manufactured to provide the required environment for the temperature rising test of all kinds of electrical, electrical products. It can be customized according to the different testing samples. Technical
Stainless Steel Electrical Safety Test Equipment , Electrical Appliance Tester 4.5kg
Stainless Steel Electrical Appliance Tester IEC60335-2 Load For Testing Rotating Spits , Testing Rotating Spits Load Product information: The testing rotating spits load complies with IEC60335-2-9 102, GB4706-14 Figure 101, the equivalent mass is about 4.5kg.It is made of stainless steel. Size:Ф100.5*85.3mm.
IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer
Product Briefing: Electric hammer no-load service life,endurance test system suitable for durability project test of hand-held electric power tool below2.5KW; meet standard of GBB3883.1-2008,GB3881.7-2012 Term17,IEC6074-2-6:2003;professional testing equipment for professional test institution and power tool manufacturer. Electric hammer no-load service life,endurance test system meets standard of IEC6074-2-6 Fig. 103,assemble an electric hammer and electrodrill;make it
KingPo Electrical Safety Test Equipment Kettle Plug Tester Horizontal Vertical Clamp
Kettle Plug Tester / Kettle Insert-Withdraw Endurance Test Device Product information: The kettle insert-withdraw endurance test device is designed and manufactured according to the standard IEC60335 -2- 15 which is used to test the cordless kettle plug life. Test principle and product feature: Test principle:The device is driven by the motor and crank connecting link. And the kettle is pulled out for 10000 times at the rate of 10 times per minute. Then under the circumstance
PLC Control Microwave Oven Door Endurance Testing Machine With Stepper Motor
Microwave Oven Door Endurance Tester Product information: The microwave oven door endurance tester is designed and manufactured according to IEC60335-2-25. It is a dedicated tester which is used to inspect the wear resistance of the microwave door system, including the structure of the hinge, microwave seals and other related components that during the process of using. Control mode PLC control Display mode True color liquid crystal display(standard configuration of 7 inch
CK1 / CK2 / CK3 / CK4 Creepage Distance Test Cards Stainless Steel Material
CK1 / CK2 / CK3 / CK4 Stainless Creepage Distance Test Cards IEC60335 Product information: We have five kinds of Creepage Distances Test Cards, CK1/CK2/CK3/CK4/CK5.These test gauges conforms to IEC60884-1, IEC60598, and IEC60335 etc.They are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements
IEC 60227-2 / IEC 60245-2 Flexible Cable Testing Equipment For Mechanical Strength
UL 1581 / IEC 60227-2 / IEC 60245-2 Flexible Cable Testing Equipment 1.1 Main purpose This instrument is mainly used to test the mechanical strength of finished flexible cables. It is suitable for places: quality control, laboratories, etc.During the test, the flexible wire is wound on the trolley of the machine, the two ends are fixed with weights, and a certain current is passed according to the standard.During the test, the travel distance of the trolley is 1 m, and the
IEC60335-1 Clause 21.2 Electric Safety Tester For Solid Insulation Accessible Parts
IEC 60335-1 clause 21.2 Electric strength test instrument for Accessible parts of solid insulation 21.2 Accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements. Compliance is checked by subjecting the insulation to the following test, unless the thickness of supplementary insulation is at least 1 mm and that of reinforced insulation is at least 2 mm. The insulation is raised to the temperature measured during the test of
IEC 61439-7 Inrush Current Tester 230A Peak Current 100 µS Pulse Time
Inrush current Tester According to standard:IEC 61851-1:2017-clause 12.2.6, ISO 17409:2015-clause8.2.2, IEC61439-7-Annex CC Figure CC.1 – Test circuit for endurance of the individual switching device test Figure CC.2 – Informative wave shape of inrush current for tests in accordance with Annex CC Test data
IEC 60335-2-6 Figure 106 Spillage Solution Bottle Polycarbonate Material
IEC 60335-2-6 Spillage solution bottle Figure 106 – Detail of bottle cap and position of hole Figure 107 – Spillage solution bottle
IEEE Std C57.12.28 figure 4 Pushing tool for for high-force applications in electrical testing, transformer maintenance, and mechanical stress analysis
Pushing Tool | Compliance: IEEE Std C57.12.28-Figure 4 Max. Load: 1000N Resolution: 1N Error: ±0.5%F.S Dimension: 260*66*36 mm According to:IEEE Std C57.12.28-figure4 square face:12.7mm*12.7mm 1. Max Load Capacity 1000 Newtons (N) Equivalent to ~102 kg (kilogram-force) or ~225 lbs (pound-force). Ideal for high-force applications in electrical testing, transformer maintenance, and mechanical stress analysis. 2. Resolution 1 Newton (N) Precise force measurement increments for
ISO Automatic Voltage Regulator For SMT / OA / CNC Equipment
AVR APA6000 series Product parameter • Input voltage range:1Ø2W+G 110V/220V±10% 3Ø4W+G 220V/380V±10% • Load Regulation≤1% Waveform Distortion≤3% • The unbalanced three-phase load ≤30%, the unbalanced output voltage ≤ 3%. • Full load can be used for a long time, and the voltage can be regulated continuously for a short time within 30% of overload. Product details High Performance • High voltage stabilization rate, low harmonic distortion, suitable for the use of voltage
EN ISO 25649-1 Child Torso Probe 100N 285×355×200mm
EN ISO 25649-1 Child Torso Probe Product Specifications Attribute Value Place Of Origin Guangdong, China (mainland) Weight 100N Size 285 × 355 × 200mm Standard EN ISO 25649-1 Product Description EN ISO 25649-1:2024-figure7 Child torso probe conforming to international testing standards.
EN ISO 25649-1 Adult Torso Probe
EN ISO 25649-1:2024-figure 6 Adult torso probe Product Specifications Attribute Value Place Of Origin Guangdong, China (mainland) Weight 100N Size 610 × 460 × 200mm Standard EN ISO 25649-1:2024 Product Description EN ISO 25649-1:2024-figure 6 Adult torso probe is a precision testing instrument designed for compliance with international safety standards.
UL Certified 270g/m² White Duck Material Cotton Fabric 1000×1500mm Size for Electrical Safety Testing
UL Certified 270g/M² Cotton White Duck Material 1000×1500mm This UL certified white duck cotton material features a weight of 270g/m² (8 ounces per square yard) and comes in a standard size of 1000×1500mm. Product Specifications Specification Detail Place of Origin Guangdong, China (mainland) Weight 270 g/m² Size 1000 × 1500mm Standard UL, IEC Product Details The white duck cotton material conforms to UL standards with a specified mass of 8 ounces per square yard (0.27 kg/m²)
UL Certified 34g/m² Bleached Cotton Cheesecloth
34g/m² UL Certified Bleached Cotton Cheesecloth Product Specifications Place Of Origin Guangdong, China (mainland) Weight 34 g/m² Size 800 × 3000mm Standard UL Product Description This bleached cotton cheesecloth meets UL certification standards with a weight of approximately 34 g/m² (1.0 oz/yd²). The fabric features a thread count ranging from 25-32 by 23-31 threads per inch (10-13 by 9-12 threads per cm). Thread count range 26 by 24 Weight 34 g/m² Size 3000 × 800mm Standard
KP-1950U Discharge IC Tester for IEC62368-1 GB4943.1 Compliance
KP-1950U Discharge IC Tester for IEC62368-1 GB4943.1 Compliance Product Attributes Standards IEC62368-1:2018, GB4943.1-2022 Product Description The KP-1950U Discharge IC Tester is a precision instrument designed for electrical safety testing, capable of generating accurate pulse signals and high-voltage DC signals. Compliant with international standards GB4943.1 and IEC62368-1, it meets all test requirements specified in Appendix G.16.2. Key features include: Generates 1.2/50
KP-368H Telephone Ringing Signal Tester GB4943.1 IEC62368-1 200MHz
KP-368H Telephone Ringing Signal Tester GB4943.1 IEC62368-1 Product Specifications Standards GB4943.1-2022 Appendix H, IEC62368-1:2018 Sampling module bandwidth 200MHz Product Overview The KP-368H Telephone Ringing Signal Tester is a specialized test instrument designed for electrical safety testing. It accurately simulates telephone network environments to evaluate telephone ring signals, featuring two built-in test methods (Method A and Method B). Compliant with internation