DJI RID Analysis Messages Module And Decoder Module DJI O3 O4 RID Messages Protocol
Supports DJI OC1/2/3 protocol drone detection and decoding, and can obtain drone GPS coordinates, pilot GPS coordinates, return point GPS coordinates, drone model and unique serial number and other parameters.
DJI RID Analysis Messages Module & Decoder Module DJI O3/O4 RID Messages Protocol
This DJI & RID module is a high-performance drone signal decoder for real-time identification and tracking. It supports DJI O3 decoding and O4 encrypted data output with server-side decryption. With FPGA-based processing, it delivers strong detection performance up to 20 km. All processing is done on-device for fast and reliable results. Its compact design allows easy integration into security and Counter-UAS systems.
Main Feature
· For DJI O3, output drone/pilot/home location, serial, drone model etc.
· For DJI O4, output 176 encrypt bytes, use our server interface to decrypt to drone/pilot/home location, serial etc.
· DJI Detect Range with LNA: 2km-20km
· RID: Support GB42590-2023 / ASTM F3411-22a
· RID Detect Range: 1km-5km
· All processing on device and output the decoder result.
· UDP/TCP/ ttl 3.3v with 115200
· 5V, 3.3W.
· 89mm * 55mm * 18mm
Common commands
|
start |
Default |
|
-gain xx -longi xxxx, -lati xxxx, -freq 2.4 -freq 5.8 |
Set gain [10 70] Set local longtitue Set local latitutude Scan 2.4G only Scann 5.8G only |
|
example |
start -gain 60 -longi 121.498,-lati 31.33, |
|
Change ip |
-setip xx.xx.xx.xx |
Case 1: Mavic 3 T (no encryption)
Case 2: Mini 4 Pro (Encrypted)
Our module output 176byte encrypted bytes, use our O4 decrypted server, output as following
Case 3: Mini4 RID broadcasting, received by type-c serial port
Recommended Products
