Single-component polyurethane foam sealant
This product is an economical one-component polyurethane foam sealant. It features a high foaming ratio, small shrinkage, and uniform pores. This product is applicable for filling, bonding, sealing and insulation of building doors and windows. Product features The normal operating temperature of this product is +5℃ to +35℃, and the optimal usage temperature is +18℃ to +25℃. The temperature resistance range after curing is -30℃ to +80℃. The drying time at room temperature is
This product is an economical one-component polyurethane foam sealant. It features a high foaming ratio, small shrinkage, and uniform pores. This product is applicable for filling, bonding, sealing and insulation of building doors and windows.
Product features
The normal operating temperature of this product is +5℃ to +35℃, and the optimal usage temperature is +18℃ to +25℃. The temperature resistance range after curing is -30℃ to +80℃.
The drying time at room temperature is less than 10 minutes, and the cutting time is less than 45 minutes.
It does not contain CFC or SCCP.
Enforce standards
T/CPUIA 0001-2021
Application scope
This product is applicable for filling, bonding, sealing and insulation of building doors and windows.
Specification
| Item | Specification |
|---|---|
| Density, kg/m³ | 15–30 |
| Thermal conductivity, 35 °C, W/(m·K) | ≤0.05 |
| Shear strength, kPa | ≥80 |
| Compressive strength, 10% compression, kPa | ≥30 |
| Cutting-ready time | ≤45 min |
FAQ
A: Good adhesion to concrete, brick and wood. It does not stick well to PE, PP and Teflon.
A: Optimal can temperature: 18‑25°C, usable range: 5‑35°C. Temperature influences foaming and curing speed.
A: Trim after skin‑forming; full curing takes about 8 hours. Not UV‑resistant, cover with mortar or paint after curing.
A: Store upright in cool dry ventilated place, away from heat and open flame. Keep out of children’s reach, wear protective gloves and goggles during application.
Recommended Products
