DL32 POLYETHER MACRO MOLECULAR COMPOUNDS | Demulsifier | Lubricant Additive
DL32 has good demulsification resistance, it is widely used in marine oil, it can expand the service life of marine oil.
DL32 POLYETHER MACRO MOLECULAR COMPOUNDS
DESCRIPTION
DL32 has good demulsification resistance, it is widely used in marine oil, it can expand the service life of marine oil, the data of demulsification could reach a high standard level, in the meantime, it has antifoam ability and it could increase other additives performance in marine oil. Its demulsification resistance ability is similar as T-1001 in lubricant oil, it is better than T-1001 in antiwear hydraulic oil, its oil solubility is better than T-1001. At ambient temperature, DL32 could be blended directly with no heat condition.
It is suitable for all oil products with high requirement of demulsfication performance, especially for the marine oil.
Reference dosage
Reference dose:0.02%-0.05%
SPECIFICATIONS
|
ITEM |
Typical data |
TEST METHOD |
|
Appearance |
Brown Transparent Liquid |
Visual |
|
Kinematic Viscosity(100°C), mm2/s |
≥10 |
GB/T265 |
|
Density(20°C), kg/m3 |
850-950 |
GB/T1884 |
|
Flash point(COC), °C |
≥70 |
GB/T3536 |
|
Moisture, m% |
≤0.50 |
GB/T260 |
|
Acid value, mgKOH/g |
50-70 |
GB/T264 |
STORAGE
This product shall be stored, loaded & unloaded and blended according to SH/T0164. The high temperature shall not exceed
80°C, and not exceed 60°C for long term storage. It is nonflammable, non-explosive and in-corrosive, and it is same as the
common petroleum products in the aspects of security, environmental protection and use etc. Special protection is not
needed.
PACKAGE
180kg per plastic drum; 900KG per IBC drum.