OEM Dacromet Long Coil Spring Compression 36" Semicircular Wire
Compression spring·CUSTOMIZATIONEvery application requires a different spring design. Our custom made compression springs are manufactured according to customer specifications, including dimensions, materials, spring rates, and operating conditions. We provide complete customization services from design consultation and sample development to mass production. Our goal is to provide optimized spring solutions that improve equipment performance and reliability.Technical
Every application requires a different spring design. Our custom made compression springs are manufactured according to customer specifications, including dimensions, materials, spring rates, and operating conditions. We provide complete customization services from design consultation and sample development to mass production. Our goal is to provide optimized spring solutions that improve equipment performance and reliability.
Technical parameters of cylindrical spiral compression spring
| To customize the compression spring, you need to provide the following necessary parameter information: | ||
| Wire diameter d: mm | (Note: the diameter of the spring wire) |  |
| Outer diameter D2: mm | (Note: the diameter of the outer circle of the spring) | |
| Length L0: mm | (Note: the free height of the spring) | |
| Number of circles Na: circle | (Note: the total number of turns of the spring) | |
| For customized compression springs, you also need to provide the following technical requirements: | ||
| turn around: | (Description: Left-handed Right-handed) | |
| Material requirements: | (Such as: stainless steel wire SUS, carbon steel wire SWC, piano wire SWP, copper wire... etc.) | |
| Surface treatment: | (Description: blackening/galvanizing/nickel plating/chrome plating/baking paint/powder spraying/electrophoresis/shot peening/dacromet/electrolytic polishing...etc.) | |
| End form: | (Explanation: Tighten Grind Tightly polish) | |
| Strength requirements: | (Note: Elastic performance, other technical requirements, etc.) | |
Spring end characteristics
| Characteristic | Parameter |
|---|---|
| Cylindrical |
| Hourglass | |
| Shrink both ends | |
| Fixed pitch | |
| Conical | |
| Closed at both ends | |
| The ends are flat | |
| Variable pitch | |
| Barrel | |
| Two End opening | |
| The ends are not flat | |
| Blackening |
| Shot Peening | |
| Apply anti-rust oil | |
| Zinc plating | |
| Polishing | |
| Electrolytic polishing | |
| Nickel plating | |
| Dacromet | |
| Teflon spray | |
| Carbon spring steel wire SWC |
| Piano wire SWPB | |
| Stainless steel wire SUS301, SUS302, SUS304, SUS316, SUS631 | |
| 65Mn | |
| 82B | |
| 55CrSi (SWOSC-V) | |
| Nickel-plated wire, galvanized wire | |
| Copper wire, phosphor copper wire, beryllium copper wire | |
| Square wire, flat wire, semicircular wire | |
| Alloy material wire | |
| Other special specifications steel wire | |
| Wire diameter specifications | 0.1~6mm |
Recommended Products
