Endress Hauser ATEX Capacitance Level Sensor FTI55 for Bulk Solids
ATEX Endress Hauser Capacitance Point Level Detection Solicap FTI55-AAA1RG1E3A1A Product Specifications Attribute Value Supply / Communication 19 ... 253V AC 10 ... 55V DC-PNP 19...253V AC bzw 10...55V DC 8/16mA, 11 ... 36V DC PFM 3-wire Measuring principle Capacitive Solid Application Fully / partly insulated rod probe for small-grain / large-grain bulk solids; Simple calibration; Suitable for abrasive media; Very robust probe Ambient temperature -50°C ... 70°C (-58°F ...
| Attribute | Value |
|---|---|
| Supply / Communication | 19 ... 253V AC 10 ... 55V DC-PNP 19...253V AC bzw 10...55V DC 8/16mA, 11 ... 36V DC PFM 3-wire |
| Measuring principle | Capacitive Solid |
| Application | Fully / partly insulated rod probe for small-grain / large-grain bulk solids; Simple calibration; Suitable for abrasive media; Very robust probe |
| Ambient temperature | -50°C ... 70°C (-58°F ... 158°F) |
| Main wetted parts | PE, PPS, 316L, Steel |
| Communication | 2-wire 19-253 VAC DC PNP Relais DPDT PFM 3-wire 8/16 mA |
| Sensor length | 0.2m ... 4m (8" ... 157") Inactive length: 0.1m ...1m (2" ... 39") |
| Safety approvals | SIL |
- Measuring principle: Capacitive Solid
- Characteristic / Application: Fully / partly insulated rod probe for small-grain / large-grain bulk solids; Simple calibration; Suitable for abrasive media; Very robust probe
- Specialities: Inactive length; Active build-up compensation; High lateral loading; Extremely robust probe
- Process temperature: -50°C ... 180°C (-58°F ... 356°F)
- Process pressure / max. overpressure limit: Vacuum ... 25 bar (Vacuum ... 362 psi)
- Process connection: Thread R1 1/2, NPT1 1/2; Flanges from DN50.../ASME 2".../JIS...
- Certificates / Approvals: ATEX, FM, CSA, IEC Ex, JPN Ex, NEPSI
- Design approvals: EN 10204-3.1
- Application limits: DK min 2
Solicap FTI55 is a fully/partly insulated and robust rod probe for point level detection of fine-grained to coarse-grained bulk solids. It offers maximum reliability due to its active build-up compensation and is suited for a wide range of applications thanks to numerous certificates and approvals. Due to its robust construction, it can also be used to provide accurate measurements in applications with very high lateral loads up to 300Nm.
For applications with very high lateral loads up to 300Nm. Fieldgate and Solicap represent a solution for material provisioning and logistical optimization (inventory control).
- Process connections: Flanges and threads
- Measurement range: 200 to 4,000mm (4 to 157")
- Temperature: -50 to +180°C (-58 to +356°F)
- Pressure: -1 to +25bar (-14.5 to +363psi)
- International explosion protection certificates, SIL
- Highest safety and reliability due to robust design for demanding process conditions
- Cost savings thanks to easy and fast commissioning as calibration is performed at the press of a button
- Universal application thanks to wide range of certificates and approvals
- Two-stage overvoltage protection against static discharges from the silo
- Active build-up compensation for bulk solids with caking tendency (under development)
- Increased safety due to permanent automatic monitoring of electronics
- Reduction in storage costs thanks to easy-to-shorten rod model (for partial insulation) and rope model (for partial and full insulation)
Recommended Products
