Wet Method Total Organic Carbon TOC Analyzer TOC-U200
Wet Method Total Organic Carbon TOC Analyzer TOC-U200 Applications Drinking water, surface water, rivers and lakes, tap water, industrial wastewater, domestic wastewater, chemical wastewater, pharmaceutical plant water, and water used in scientific research and experiments. Main Features Wet digestion method based on the principle of ultraviolet persulfate oxidation and non-dispersive infrared (NDIR) detection. TOC concentrations in water samples ranging from 0.001 mg/L - 100
Drinking water, surface water, rivers and lakes, tap water, industrial wastewater, domestic wastewater, chemical wastewater, pharmaceutical plant water, and water used in scientific research and experiments.
- Wet digestion method based on the principle of ultraviolet persulfate oxidation and non-dispersive infrared (NDIR) detection.
- TOC concentrations in water samples ranging from 0.001 mg/L - 100.0 g/L.
- User-Friendly 12" touchscreen LCD with visible detection curves for easy operation.
- High-reflectivity gold-plated chamber
- Highly focused NDIR infrared light source
- Highly sensitive infrared sensor
- Multiple Detection Modes: TC, TIC, TOC, NPOC can be measured within the same reactor.
- Leading Electromagnetic Metering Pump
- Three-Channel Electronic Cold Trap
- Automatic Cutoff Technology for Furnace Overheating
- Real-Time Monitoring of Temperature, Pressure, and Flow
- Optional Online Module for real-time monitoring and Auto-sampler for labor and time savings
- Convenient Data Storage, Retrieval, and Password Protection.
- Free Installation and Training,
- Cost-Effective Consumable Supplies ensure a worry-free purchase
- Lifetime free after-sales support
- Product standard: EP, USP, HJ 501-2009 national environmental protection standard, and JJG 821-2005 metrological verification regulations.
| Digestion Method | UV persulfate oxidation (Wet method) |
|---|---|
| Detection Range | 0.001-100.0mg/L |
| Accuracy | ±5% |
| Repeatability | ≤3% |
| Measurement Modes | TC,IC,TOC,NPOC |
| Maximum Salt Tolerance | 100g/L |
| Analysis Time | 3~8min |
| Detector | NDIR (Non-Dispersive Infrared Detection) |
| Operation Mode | Main Unit + PC |
| Display | 12" LCD with touch screen |
| Dimensions(LxWxH,mm) | 420x365x380 |
| Weight (Kg) | 21 |
| Power Supply | AC220V±10% / 50Hz |
In this process, water samples are fully oxidized and decomposed into CO2 through ultraviolet persulfate oxidation. CO2, under the action of a carrier gas, is dried, purified, and then enters the non-dispersive infrared detector (NDIR), yielding the total carbon concentration in the water sample.
Recommended Products
Video
Video
Video
Video
Video
Video