GS-0801 Automatic SMT Nozzle Cleaning Machine 200W High Efficiency for 0.5-0.6MPa Industrial Gas

Name: GS-0801 Automatic SMT Nozzle Cleaning Machine 200W High Efficiency for 0.5-0.6MPa Industrial Gas
Brand: Global Soul Limited

Professional 200W automatic SMT nozzle cleaning machine designed for industrial environments. Features purified water cleaning system, operates at 0.5-0.6MPa air pressure, and maintains optimal nozzle performance. Includes safety protocols for trained personnel, working temperature range of 5°C to 45°C, and humidity tolerance from 20% to 95%.

Liquid storage 3000ml

Size(L*W*H) 505×570×500（mm）

Packaging Details 520*580*520mm

Air consumption Below 280NL/min

Power supply 3P2W，220VAC，50/60Hz，10A

Injection pressure 0.3—0.4 MPa

swimsuit high waist bikini bottom high waist reflow oven smt

Product Description

Automatic SMT Nozzle Cleaning Machine Overview

The GS-0801 Automatic SMT Nozzle Cleaning Machine delivers high-efficiency cleaning with 200W power output, specifically designed for maintaining SMT production equipment nozzles in optimal condition.

Key Specifications

Power Rating	200W
Working Temperature Range	5°C to 45°C
Humidity Range	20% to 95%
Air Pressure Requirement	0.5 to 0.6MPa
Cleaning Fluid	Purified Water (HP value 5-7 soft water)

Safety & Operation Requirements

Critical Safety Warnings

Operation restricted to trained professional maintenance personnel only
Verify external power supply matches equipment rated voltage before powering on
Contains high-voltage devices and mechanical transmission - observe personal safety protocols
Use only purified water (HP value 5-7 soft water) - solvents strictly prohibited
Requires filtered compressed air - unfiltered gas strictly prohibited
Avoid striking touch screen with sharp objects

Installation & Environment

Place on level ground or flat desktop in dry, ventilated facility
Maintain ambient temperature between 5°C and 45°C
Operate within 20% to 95% humidity range
Follow factory voltage specifications for power connection
Use purified 0.5-0.6MPa industrial gas source during operation

Water Filling Procedure

Use only purified water (HP value 5-7 soft water)
Stop equipment before opening water injection port
Monitor display prompts and audible warnings during filling
Buzzer sounds three times when water level is adequate - stop filling immediately
Prevent overflow to avoid electrical component damage

Product Visualization