Glow Wire Needle Vertical Flammability Chamber Combusting Test Machine
Glow Wire Combusting Test Machine for Plastic Material Product Description Parts of electrical and electronic equipment may be exposed to overheating stress due to the action of electricity, and their deterioration may reduce the safety performance of the equipment. These parts should not be unduly affected by heat and fire generated inside the equipment. Parts of insulating materials or other solid combustible materials that are prone to flame spread inside the equipment may
Glow Wire Combusting Test Machine for Plastic Material
Parts of electrical and electronic equipment may be exposed to overheating stress due to the action of electricity, and their deterioration may reduce the safety performance of the equipment. These parts should not be unduly affected by heat and fire generated inside the equipment. Parts of insulating materials or other solid combustible materials that are prone to flame spread inside the equipment may ignite due to hot wires or hot components. Ignition occurs under certain conditions, such as fault current flowing through wires, component overload, and hot components in poor contact.
Glow-wire combustion chamber is to simulate the thermal stress caused by heat sources or ignition sources such as glow-wire components or overload resistors in a short period of time under fault or overload conditions to assess the fire risk of products.
Tset Standard:
- IEC60695-2-10/11/12/13 Fire hazard test methods for electronic and electrical products
- IEC60884-1-2002 Plug sockets for home and similar purposes
- GB2099.1-2008 Plug sockets for home and similar purposes
- IEC60335-1 Safety of household appliances and similar appliances
- GB4706.1-2005 Safety of household appliances and similar appliances
- VDE0620-2010 General requirements for household and similar plugs and sockets
- GB/T5169.10-11-2006 Glow wire device and general test method
| Product name | Glow Wire Test Apparatus |
| Control mode | Keystroke Printout |
| Outer box dimensions | 110*65*125(cm) |
| Glow wire temperature | Adjust from room temperature to 1100°C |
| Glow wire moving speed | 10mm/s-25mm/s |
| Box volume | ≥0.5m³,With glass observation door |
| Fuel | Butane |
| Thermocouple | 1.0mm nickel-chromium armored (K type) imported thermocouple |
| Temperature tolerance error | 500~750ºC±5ºC;750~960ºC±10ºC |
| Glow wire U-shaped head | 4mm imported nickel/chromium (80/20) wire |
Recommended Products
Video
Video