Vertical Planetary Cycloidal Gear Motor Reducer Flange Mounted
Vertical Planetary Cycloidal Gear Motor Reducer Flange Mounted Product Specifications Attribute Value Gearing Arrangement Planetary motor Output Torque 48.3-11920N.M Input Speed 750-1500rpm Output Speed 17-136rpm Weight 40kg Material Steel or cast iron Port Shanghai, Ningbo Mounting Foot mounted, flange mounted Structures Bearing + Gear + Box Cycloidal Gear Reducer Advanced Transmission Technology The cycloid reducer is a novel transmission device that adopts the K-H-V
| Attribute | Value |
|---|---|
| Gearing Arrangement | Planetary motor |
| Output Torque | 48.3-11920N.M |
| Input Speed | 750-1500rpm |
| Output Speed | 17-136rpm |
| Weight | 40kg |
| Material | Steel or cast iron |
| Port | Shanghai, Ningbo |
| Mounting | Foot mounted, flange mounted |
| Structures | Bearing + Gear + Box |
The cycloid reducer is a novel transmission device that adopts the K-H-V planetary transmission principle with small tooth difference. This precision-engineered system features a double eccentric sleeve with 180-degree dislocation on the input shaft, creating an efficient H mechanism through roller bearings. The cycloidal wheels mesh with needle gears to form a high-performance internal meshing deceleration mechanism.
This reducer is widely used in demanding industrial environments including metallurgy, mining, lifting, transportation, cement production, construction, chemical processing, textile manufacturing, pharmaceuticals, food production, and environmental protection systems. It operates reliably in temperatures ranging from -40℃ to 40℃, with oil temperatures not exceeding 80℃ under normal load conditions.
- Stable operation: Multiple tooth pair contact ensures large coincidence, strong overload capacity, and minimal vibration
- High efficiency: Primary reduction efficiency reaches 94% with reduction ratios from 9-87 (single-stage) up to 5133 (two-stage)
- Durable construction: High-carbon alloy steel components (HRC58-62) with precision grinding ensure long service life
- Low maintenance: Rolling friction design minimizes wear in the meshing area
| Model | Power (KW) | Shaft Diameter (mm) | Center Height (mm) | Mounting Pitch (mm) | Key Size (mm) | Shaft Length (mm) | Shaft to Hole (mm) |
|---|---|---|---|---|---|---|---|
| BWD-B0-0.75 | 0.75 | 30 | 100 | 90*150 | 8 | 35 | 93 |
| BWD-B1-1.1 | 1.1 | 35 | 120 | 110*240 | 10 | 56 | 125 |
| BWD-B1-1.5 | 1.5 | 35 | 120 | 110*240 | 10 | 56 | 125 |
| BWD-B2-2.2 | 2.2 | 45 | 140 | 150*280 | 14 | 68 | 144 |
| BWD-B2-3.0 | 3.0 | 45 | 140 | 150*280 | 14 | 68 | 144 |
| BWD-B3-5.5 | 5.5 | 55 | 160 | 200*340 | 16 | 80 | 149 |
| BWD-B3-7.5 | 7.5 | 55 | 160 | 200*340 | 16 | 80 | 149 |
Important: The horizontal cycloid reducer is normally lubricated by oil pool, with oil level maintained at the middle of the oil window. For harsh conditions or high ambient temperatures, use circulating lubrication.
The reducer ships without lubricating oil. Initial operation requires oil change after 100 hours, followed by regular changes every six months (8-hour work system). More frequent changes may be needed for severe operating conditions.
Recommended Products
Video
Video
Video
Video
Video
Video
Video