HGQAXCT-C2TSC
This equipment is a press-mounted machine designed for the rubber bushing of automobile shock absorber to be pressed into the lifting ring. This equipment is mainly composed of pneumatic system, press- mounted positioning system, press-mounted system and electrical system. This equipment is powered by a servo cylinder for press-fitting, using a PLC microcomputer to control each component, the components complete each action, the press-fitting positioning system accurately
This equipment is a press-mounted machine designed for the rubber bushing of automobile shock
absorber to be pressed into the lifting ring. This equipment is mainly composed of pneumatic system, press- mounted positioning system, press-mounted system and electrical system. This equipment is powered by a
servo cylinder for press-fitting, using a PLC microcomputer to control each component, the components
complete each action, the press-fitting positioning system accurately locates the workpiece ring and
bushing, and the press-fitting servo cylinder presses the bushing into the ring. The reverse-pressure servo
cylinder pushes the bushing backup, ensuring that the bushing is even at both ends of the ring and the press- fitting operation is completed simultaneously.
|
S/N |
Item |
Parameter |
Remarks |
|
1 |
Outer diameter of lifting ring φ d |
φ20 ~ φ70mm |
|
|
2 |
Ring thickness H |
≤60mm |
|
|
3 |
Rubber bushing height L |
≤150mm |
Non-core |
|
4 |
Pressure loading force of upper cylinder |
20KN |
|
|
5 |
Lower cylinder jacking force |
15KN |
|
|
6 |
Press speed |
≤166mm/S |
Recommended Products
