Multi Liquid AB Resin Potting Compound Component Meter Mix Machine
hand held gun semi-automatic dispensing machine potting mixer dosing equipment Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration
Origin
China
Condition
New
Installation
Vertical
Warranty
12 Months
Customization
Available | Customized Request
HS Code
8424899990
Product Description
hand held gun semi-automatic dispensing machine potting mixer dosing equipment
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
Introduction :
1. Working Area: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Gear pump /screw pump/ cylinder pump special for transparent glue.
4. Mix glue A & B more evenly; no more or no less for agent B.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Gear pump /screw pump/ cylinder pump special for transparent glue.
4. Mix glue A & B more evenly; no more or no less for agent B.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Tank system technology:
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure . 5 5.Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.
6 Tank with artificial feeding mouth that can be added glue appropriately by hand .
7 Tank with silica-dryer which can prevent material especially PU from crystallization .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure . 5 5.Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.
6 Tank with artificial feeding mouth that can be added glue appropriately by hand .
7 Tank with silica-dryer which can prevent material especially PU from crystallization .
D&H Pump technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Valve technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Tech Data
|
Adjustable Ratio
|
1 :1 ---10:1 adjustable
|
|
Output Speed
|
0.5g/s -12g per single pump
|
|
Mixing accuracy
|
+/- 2%
|
|
Program memory
|
10pcs
|
|
Viscosity
|
50cps~35000cps
|
|
Operation mode
|
manual / automatic/ Third party signal
|
|
Ratio control
|
PLC/double cylinder plunger pump
|
|
Flow control
|
Digital input
|
|
Program mode
|
Tech program
|
|
Automatic control system
|
Touch screen and trigger
|
|
Mixed mode
|
Dynamic mixing (with self-cleaning function)
|
|
Tank
|
Stainless tank A(25L)and stainless tank B(10L)
|
|
Liquid level sensor (low liquid level /high liquid level and limit liquid level)
|
|
|
Tank stir
|
|
|
Constant heat (temperature to 80°C)
|
|
|
Y type Filter
|
|
|
Voltage
|
220V/50Hz/3500W
|
|
Input air pressure
|
0.4MPa-0.7MPa
|
|
Dimension
|
1200mm×600mm X1500mm
|
|
Machine frame
|
SPCC+Industrial aluminium +stainless +metal plate
|
|
Others
|
AB tank ,A pump,AB pipeline heating function
|
PLC Operation Controlling System
1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range .
2 Machine with detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation .
Application
1.Potting&Encapsulation &Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts.... 2.Dispensing&Dosing : LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling .... 3.Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....
1.Potting&Encapsulation &Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts.... 2.Dispensing&Dosing : LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling .... 3.Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovoltaic inverter .etc
IV:Application
| Model | PGB-700 | Voltage | 220V-380V |
| XYZ axis | 700*700*80(mm) | Application | led,electronic,filter |
| Glue support | Silicone, epoxy resin, urethane | Certification | CE, RoHS |
| Power | 3600w | Warranty | 1years |
| Item Name | mixing and dispensing | Function | DC 12V-14V |
| Ratio support | 1:1 to 10:1 | MOQ | 1 Piece |
| Gluing Speed | 5-66g/5s Adjustable | Price | depends your glue feature |
| Air Pressure: | 0.5-0.7Mpa | Port | Huangpu |
Recommended Products
Price: 10800 as per configurations
Video
Price: $9,000.00/pieces 1-1 pieces
Interested in this product?
Contact us now for more details and a custom quote.