50Hz/60Hz Highly Dynamic Temperature Control System PID Control

-50℃~250℃, -60℃~200℃,-70℃~250℃,-80℃~250℃ Dynamic Temperature Control System

1. Control mode: Feedforward PID + Our special dynamic control calculation, PLC controller.

2. Temp. control: Option: process temperature control or jacket oil temperature control.

3. Temp. feedback: Heat-conducting medium: PT100, Raw material process: PT100.

4. Temp. accuracy +-1℃.

5. 7-inch color touch screen controller, temperature curve record, data export to excel format.

6. The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature,pressure do not rise up when system is running. The system will supplement oil automatically at low temperature.

Technical parameters of -50℃~250℃ highly dynamic temperature control system:

• Structure design

1. Only the heat conduction medium in the expansion container touches the oxygen in the air. ( The container temperature is limited to 60℃ ).

2. No volatilization of the heat conducting medium at high temperature.

3. No need to change the heat conducting medium,

4. Continuous control of the temperature of the below range, can be done without rising the pressure : -90℃ ~ 195℃, -70℃ ~ 220℃, -55℃ ~ 250℃, -25℃ ~ 300℃.

• Display function

• Process Control

Change the control settings of the method, the response as soon as possible in the process of the system lags behind, be the smallest system overshoot.

• High repeatability of results control

• Circulation pump

High temperature resistant low temperature magnetic drive pump or a leak-free high and low temperature shield-driven pump, reduce the risk of system leakage. At the same time the system has the advantages of low noise and big traffic flow.

• Electronic expansion valve

• Data interface and software standard configuration:

-PT100 temperature sensor input interface.

-USB export data interface.

-RS485 communication interface ( MODBUS protocol).

-Alarm output.

• Security

Phase sequence, leakage protection, refrigeration system high and low voltage protection, overload the pump, compressor overload, high and low level, two independent over-temperature protection, water protection, protection of the circulation line shut.

• Connecting Pipe

Learn more detail information welcome contact [email protected]  24h/7days online service.

-90℃~250℃, -100℃~100℃, -25℃~200℃, -40℃~200℃ heating and cooling circulators

Technical parameters of -90℃~250℃ heating & cooling circulators: