JUKI High Speed Compact Modular Mounter RX-8
Features: Efficient production in made possible via upstream data sharing to square bad mark propagation, component supply management while showing real-time status of the production line. Communicates and shares information with other equipment Bad mark information of the circuit detected by the inspection machine or a machine upstream of the line can be propagated to the RX-8 in order to reduce the bad mark recognition timed and imporve productivity. 01 1.High-speed
Features:
Efficient production in made possible via upstream data sharing to square bad mark propagation,
component supply management while showing real-time status of the production line.
Communicates and shares information with other equipment
Bad mark information of the circuit detected by the inspection machine or a machine upstream of the line can be
propagated to the RX-8 in order to reduce the bad mark recognition timed and imporve productivity.
01
1.High-speed placements of up to 100,000 CPH.*¹Best-in-class placement rate per square meter(sq ft).*²
New P20 placement head achievesspeeds of up to100,000CPH.
At only 998mm wide, the RX-8 provides exceptional productivity in a compact footprint.
Best in class placement per square meter(square foot)
02
Integrates seamlessly with the production enviroment
Component Management with Auto replenishment
Top production efficiency is achieved by continuous monitoring of component consumptionand communication
with the Automated Component Storage and Transport System. When the placement system detects a low-level warning,
it automatically communicates that information to the storage system, which immediately pulls an additional reel of that
component, loads it on an AIV to transport the reel to the line to arrive before the existing reel has run out.
This eliminates downtime during production due to component run out.
03
Trace Monitor tracks quality throughout the production process
Trace Monitor provides real time status of the placement head during production.
It tracks mis-picks, recognition errors and records which feeders and nozzles those
errors came from. A dashboard displays all the key performance indicators makinig
it easy to view the production efficiency and what is needed to improve the process.
04
Low impact placement for flexible circuits
Low Impact feature allows separately adjusting the down and up speed of nozzle during placement.
This minimizes the load on the part and on the board during placement.
This is optimal for placing very small parts that require a lot of accuracy.
05
The P20 high-precision planet head is ideal for high speed pocking and placing from a single reel.
The P20 is designed for placement of ultra-small chips and small IC's.
It is ideal for high-density and high-accuracy placement of LED edge lights.
06
State-of-the-art centering and inspection vision system
The vision system detects presence and absence, inverted chips, and tombstoning.
It also automatically corrects the pick position of every part, increasing the pick rate.
This system makes it ideal for placing very small parts.
Specifications:
High -Speed Compact Modular Mounter RX-8
| Board size | 50×50～510mm*¹ *²×450mm | |
| Component height | 3mm | |
| Component size | 0201*³～□5mm | |
| Placement speed (Optimum) |
Chip | 100,000CPH |
| Placement Accuracy |
±0.04mm (Cpk ≧1) | |
| Feeder capacity | Upto 56 *⁴ | |
| Power supply | 3-phase AC200V, 220V 430V *⁵ | |
| Apparent power | 2.1kVA | |
| Operating air pressure | 0.5±0.05MPa | |
| Air consumption (standard) | 20L/ min ANR (during normal operation) | |
| Machine dimensions (W x D x H)*⁶ | 998mm×1,895mm×1,530mm | |
| Mass (approximately) | 1,810 kg (with fixed bank)/ 1,760 kg (with bank changing) | |
Recommended Products
Video
Video
Video
Video
Video
Video
Video
Video