NMEA 2000 Terminator
Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. In cases where the gender is reversed, a female terminator may be required. The inline terminator is used where the network is terminated at a product, for example a GPS or weather station at the top of a mast. ● M12 A-Coded 5Pin ● Impedance: 120Ω ● IP67 ● Anti-vibration design ●
Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. In cases where the gender is reversed, a female terminator may be required. The inline terminator is used where the network is terminated at a product, for example a GPS or weather station at the top of a mast.
● M12 A-Coded 5Pin
● Impedance: 120Ω
● IP67
● Anti-vibration design
● Screw terminal connector for positive connections
● Termination resistors are used to terminate both ends of the trunk line
Recommended Products
