Electrical Equipment & Supplies Industrial Controls Other Electrical Equipment

China Analog ADM2483 ADM2483 Chips New Original Microcontroller Electronic Components Microchip for sale

Analog ADM2483 ADM2483 Chips New Original Microcontroller Electronic Components Microchip

Name: Analog ADM2483 ADM2483 Chips New Original Microcontroller Electronic Components Microchip
Brand: ShenZhen QingFengYuan Technology Co.,Ltd.

Product Paramenters ADM2483The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using Analog Devices’ iCoupler technology, the ADM2483 combines a 3-channel isolator, a three-state differential line driver, and a differential input receiver into a single package. The logic side of the

Serial Interfaces standard

Port shenzhen

Memory Type standard

Current - Output (Max) 3.6V

Voltage - Off State standard

Current Transfer Ratio (Min) 114 Input

electronic repair microscope smallest gps tracking chip rapier loom with electronic jacquard

Product Description

Product Paramenters

ADM2483

The ADM2483 differential bus transceiver is an integrated, galvanically isolated component designed for bidirectional data communication on balanced, multipoint bus transmission lines. It complies with ANSI EIA/TIA-485-A and ISO 8482: 1987(E). Using Analog Devices’ iCoupler technology, the ADM2483 combines a 3-channel isolator, a three-state differential line driver, and a differential input receiver into a single package. The logic side of the device is powered with either a 5 V or 3 V supply, and the bus side uses a 5 V supply only. The ADM2483 is slew-limited to reduce reflections with improperly terminated transmission lines. The controlled slew rate limits the data rate to 500 kbps. The device’s input impedance is 96 kΩ, allowing up to 256 transceivers on the bus. Its driver has an active-high enable feature. The driver differential outputs and receiver differential inputs are connected internally to form a differential I/O port. When the driver is disabled or when VDD1 or VDD2 = 0 V, this imposes minimal loading on the bus. An active-high receiver disable feature, which causes the receive output to enter a high impedance state, is provided as well. The receiver inputs have a true fail-safe feature that ensures a logic-high receiver output level when the inputs are open or shorted. This guarantees that the receiver outputs are in a known state before communication begins and at the point when communication ends.

RS-485 transceiver with electrical data isolation
Complies with ANSI TIA/EIA RS-485-A and ISO 8482: 1987(E)
500 kbps data rate
Slew rate-limited driver outputs
Low power operation: 2.5 mA max
Suitable for 5 V or 3 V operations (VDD1)
High common-mode transient immunity: >25 kV/μs
True fail-safe receiver inputs
Chatter-free power-up/power-down protection
256 nodes on bus
Thermal shutdown protection
Safety and regulatory approvals
UL recognition: 2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A IEC 609501 800 V rms (basic), 400 V rms (reinforced)
VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak
CQC certification per GB4943.1-2011
UL recognition: 2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A
IEC 609501 800 V rms (basic), 400 V rms (reinforced)
IEC 609501 800 V rms (basic), 400 V rms (reinforced)
VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12
VIORM = 560 V peak
DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12
VIORM = 560 V peak
CQC certification per GB4943.1-2011
Operating temperature range: −40°C to +85°C

Our Advantages

Company Profile

Recommend Products

Manufacturing Technique

FAQ

Q1:About the quotation of IC BOM?

A1:The company has the procurement channels of original integrated circuit manufacturers at home and abroad and a professional product solution analysis team to select high-quality, low-cost electronic components for customers. Q2:Quotation for PCB and PCBA solutions?

A2: The company's professional team will analyze the application range of the PCB and PCBA solutions provided by the customer and the parameter requirements of each electronic component, and ultimately provide customers with high-quality and low-cost quotation solutions.

Q3:About chip design to finished product?

A3: We have a complete set of wafer design, wafer production, wafer testing, IC packaging and integration,and IC product inspection services.

Q4:Does our company have a minimum order quantity (MOQ) requirement?

A4: No, we do not have MOQ requirement, we can support your projects starting from prototypes to mass productions.

Q5:How to ensure that customer information is not leaked?

A5: We are willing to sign NDA effect by customer side local law and promising to keep customers data in high confidential level.