ICM-20602 6-Axis Motion Tracking Device 3mm x 3mm LGA-16 Gyroscope Accelerometer ±1% Sensitivity Error
High-performance 6-axis MEMS motion tracker combining 3-axis gyroscope and accelerometer in a compact 3x3x0.75mm LGA package. Features ±1% gyro sensitivity, 1KB FIFO, 16-bit ADCs, I2C/SPI interface, and low 1.71V operation. Ideal for IoT, wearables, and motion control.
ICM-20602 LGA-16 3-axis gyroscope, 3-axis accelerometer 6-Axis MotionTracking device
Description
The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3 mm x 3 mm x 0.75 mm (16-pin LGA) package.
High performance specs o Gyroscope sensitivity error: ±1% o Gyroscope noise: ±4 mdps/Hz o Accelerometer noise: 100 µg/Hz
Includes 1 KB FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode
EIS FSYNC support
ICM-20602 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I2C and high speed SPI at 10 MHz
FEATURES and BENEFITS
3-Axis Gyroscope with Programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps
3-Axis Accelerometer with Programmable FSR of ±2g,±4g, ±8g, and ±16g
User-programmable interrupts
Wake-on-motion interrupt for low power operation of applications processor
1 KB FIFO buffer enables the applications processor to read the data in bursts
On-Chip 16-bit ADCs and Programmable Filters
Host interface: 10 MHz SPI or 400 kHz Fast Mode I2C
Digital-output temperature sensor
VDD operating range of 1.71V to 3.45V
MEMS structure hermetically sealed and bonded at wafer level
RoHS and Green compliant
Typical applications
Smartphones and Tablets
Wearable Sensors
IoT Applications
Motion-based game controllers
3D remote controls for Internet connected DTVs and set top boxes, 3D mice
Recommended Products
