80A Digital Indicating Temperature Controller 200-600V with Thermistor Input cUL
Precise digital temperature control unit with 80A relay output, 200-600V supply, and PTFE-sheathed thermistor. Features dual LED display, cUL approval, and NEMA 1 enclosure. Ideal for industrial heating systems with programmable alarms and sensor protection.
Digital Temperature Controllers unit-Digital Indicating Temperature Controller, 80A, with Thermistor
The cables and sensors of the heating systems are inserted into the control cabinet via cable glands situated at its base and are tightly wired at the clamping strips. A temperature probe with a Pt 100 sensor element must be connectedfor temperature control; a MTSufloating switch or alternatively a conductive NS 2 level rod probe must be connected for fluid level measurement.
A floating switch with an integratedtemperature probe (MTSt) or a level rod probe with an integrated temperature probe (NT 2) can of course be connected in place of indi- vidual sensors. The connection of a separate temperature probe is in this case not necessary.
Unused cable seals are closed with blind plugs.
When connecting single-phase immersion heaters use safety im- mersion heaters with an anti-burn system to improve the safety of the whole system. These immersion heaters have a temperature moni- tor built-in at their heating insert, which safely disconnects them at inadmissibly high immersion pipe temperatures (e.g. complete heating liquid loss).
Specifications:
- Input Sensor: PTFE-sheathed thermistor, 10 to 50 ft lengths available
- Display: 0.56"-high LED display
- Accuracy: ±1° full span, single-digit accuracy
- Supply Voltage: 240V or 480V; contact us for more options
- Operating Temperature: 20°F to 130°F (−6°C to 54°C)
- Process Temperature: −58°F to 302°F (−50°C to 150°C)
- Output: 240V or 480V, 1 or 3 phase, 80A relay
- Weight: 25 lb (11.3 kg)
- Approvals: cUL
- Enclosure: NEMA 1, IP23
Dual Set-Point, 20 - 125 amps
Provides precise digital control for consistent plating and etch rates in most aqueous processes. Combination control features .3 inch (7.6mm), dual LED displays. Fluoropolymer (FEP) covered 10-foot 3m), 1000-ohm platinum RTD sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Dual setpoint with heating and cooling up to 30 amps. 120-240 volts. Single phase. Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C).
Recommended Products
