Fluorescence Dissolved Oxygen Sensor Probe 12V Titanium 0-20mg/L IP68

Name: Fluorescence Dissolved Oxygen Sensor Probe 12V Titanium 0-20mg/L IP68
Brand: Xi'an Desun Uniwill Electronic Technology Co., Ltd.

Fluorescence analysis DO sensor with 0-20mg/L range, IP68 protection, and built-in temperature compensation. No membrane or electrolyte needed. Supports RS-485 MODBUS. Custom cable lengths available. Durable titanium alloy construction.

Place of Origin China

Maximum working pressure 6bar

Packaging Details Carton packaging

Measuring range 0~20mg/L

Calibration method One or Two-point calibration

Power supply DC 6~12V

swimsuit high waist bikini bottom high waist high speed micro centrifuge

Product Description

Fluorescence Analysis Dissolved Oxygen Sensor Probe 12V Titanium
Features
* 0-20mg/L or 0-200% saturation * 0~50 °C;

*IP68 protection level * No film, no electrolyte, no polarization

* No need to consume oxygen, no flow rate

* Built-in temperature sensor, automatic temperature compensation
Technical Parameters

			Item
			Parameters
		
			Model
			DS380
		
			Principle
			Fluorescence analysis method
		
			Measuring range
			0~20mg/L or 0-200% saturation
		
			Response time
			3 sec
		
			Accuracy
			1%
		
			Protection level
			IP68
		
			Installation
			Submersible
		
			Temperature sensor
			NTC
		
			Temperature range
			0~50°C
		
			Temperature accuracy
			±0.2°C
		
			Output
			Support RS-485, MODBUS protocol
		
			Power supply
			DC 6~12V, current <50mA
		
			Size
			Φ26*155 mm
		
			Probe cable length
			Default 5 m, customized 10m, 15 m and 30 m cable
		
			Fluorescent cap life
			1 year
		
			Maximum working pressure
			6bar
		
			product material
			POM/SS316/Titanium alloy
		
			Calibration method
			One or Two-point calibration
		
			Power consumption
			< 0.5 W
		
Fluorescent cap daily storage
Put it in a protective cover with a moist sponge when not in use, so that the sensor stays wet for a long time.

If the head of the sensor's fluorescent cap is dry for a long time, it will cause drift of the measurement result, so it needs to be immersed in water for 48 hours before continuing to work.