Detached Design Motion Sensor For Triproof Linear Light Dimming Function
Hot item Special Detached Design Suitable For Triproof Linear Light Dimming Function Features Special Detached Design For More Applications Supporting both remote & DIP Switch control AC input, 220-240V or 120-277VAC version TUV CE RED, UL FCC certificated Parameter Table Operating voltage 220-240 VAC 50/60Hz Switching capacity Max.200W Stand-by power
Hot item Special Detached Design Suitable For Triproof Linear Light Dimming Function
Features
- Special Detached Design For More Applications
- Supporting both remote & DIP Switch control
- AC input, 220-240V or 120-277VAC version
- TUV CE RED, UL FCC certificated
Parameter Table
| Operating voltage | 220-240 VAC 50/60Hz |
| Switching capacity | Max.200W |
| Stand-by power | <0.5W |
| Detection area | 50%/100% |
| Hold time | 5s/30s/1min/10min |
| Daylight threshold | 2Lux/10Lux/50Lux Disable |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | 2.5-6m /8.2-19.68ft |
| Detection range | Max.ø14m/45.93ft |
| Detection angle | 30°-150° |
| Operating temperature | -30°C~+70°C |
| IP rating | IP20 |
| Life time | 50,000 hours |
| Warranty | 5 years |
Default Program:
Detection Area - 100%
Holdtime - 5S
Daylight Threshold - disable
Standby Period - 0S
Standby Dimming Level - 10%
Wiring Diagram
Detection Range
Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains OFF.
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20% 30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.
Recommended Products
