Remote Control 20W LED Driver Sensor Two In One Isolated Solution
Remote Control 20W LED Driver Sensor Two In One Isolated Solution Remote Control Setting Two In One Isolated Solution Microwave Movement Sensor Feature:HT20V-I is detachable design.Remote control setting.Dimmable sensor and LED driver sensor.Isolated solution can protect the power supply and lamps.Easy installation, workable for tri-proof light.SpecificationInputInput voltage220~240VAC 50/60HzInput current0.12-0.11A MaxInput power25W MaxMicrowave frequency5.8GHz±75MHzMicrowav
Remote Control 20W LED Driver Sensor Two In One Isolated Solution
Remote Control Setting Two In One Isolated Solution Microwave Movement Sensor
Feature:
HT20V-I is detachable design.
Remote control setting.
Dimmable sensor and LED driver sensor.
Isolated solution can protect the power supply and lamps.
Easy installation, workable for tri-proof light.
Specification
Input | Input voltage | 220~240VAC 50/60Hz |
Input current | 0.12-0.11A Max | |
Input power | 25W Max | |
Microwave frequency | 5.8GHz±75MHz | |
Microwave power | <0.3mW | |
0utput | Output LED current | 0.40A(Max) |
Output LED voltage | 30V-50V DC | |
Output LED power | 12W-20W | |
Sensor Parameters | Detection angle | 30°-150° |
Detection area | 25%/50%/75%100% | |
Stand-by dimming level | 10%/20%/30%/50% | |
Mounting height | Max.6m | |
Detection range | Max.ø14m | |
Hold time | 5s/30s/1min/3min/5min/10min/20min/30min | |
Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/ Disable | |
Stand-by period | 0S/10s/30s/1min/5min/10min/30min/+∞ | |
0thers | EMC standard | EN55015 |
Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | |
Life time | 30,000 hours | |
Warranty | 3 years | |
Operating temperature | -20°C ~ 50°C Tc: 85°C | |
Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | |
Empty load voltage | ≤70V Max | |
Power factor | ＞0.9 | |
Efficiency | 87% (Max.) | |
Approval | CE SAA |
Recommended Products
