Programmable Salt Spray Corrosion Test Chamber 108L 35-55C PVC Construction
Durable 8mm PVC salt spray chamber with 108L capacity, 35-55C range, and transparent lid. Features tower spraying, heated humidification, and low water protection. Ideal for corrosion testing with customizable options.
Programmable White Salt Spray Corrosion Testing Environment Test Chamber
Precautions:
1,After each test, the switch of the oil-water separator should be opened, the oil and water should be released and wiped clean.
2,If the long-term test should be unsaturated water discharge, in normal use, the water in the saturator should be replaced regularly.
3, can not be used for a long time, if the test is redone, and all processed electrical supply, gas supply system for specific system checks to prevent failure after the start-up.
4, found that there is dirt blocking the nozzle, should promptly clear the nozzle, with alcohol, xylene or 1:1 hydrochloric acid cleaning or carefully removed with ultra-fine wire, do not damage the nozzle mouth wall, so as not to affect the quality of spray.
Specification
| Dimensions: | 108L, 270L, 600L, 1440L |
| External Dimension W*H*D(mm) | 2050*1250*1400mm |
| Lab Capacity(L) | 108 |
| Saline Capacity(L) | 15 |
| Temperature Range | 35°C~55°C |
| Compressed Air Pressure(kgf) | 1.0-6.0 |
| Product name: | Environmental Salt Spray Paint Corrosion Test Chambers Equipment High Quality |
| Power Source |
AC220/380V 50HZ |
Structure:
1. The Salt Spray and Salt Fog Corrosion Test Chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
Features
2. Water tank with mixing system on stand.
3. Heating system separate from the test salt chamber to ensure accurate results and protect the circuitry.
4. Exposed area lined with corrosion resistant PVC sheet.
5. Transparent lid allows visibility of the test.
6. Raised lid prevents condensation from dripping onto the sample.
7. Water seal and water level protection system.
8. Heated humidification tower with air relief valve with adjustable tip to determine the direction of salt spray.
9. Automatic filling of the humidification tower with DI water.
10. Digital temperature control.
11. Integral over-protection device on the heater.
12. Low water cut-off protection on humidification tower.
Details Images
Recommended Products
