Kinte Standard Rip
KINTE STANDARD RIP PRODUCT INTRODUCTION Kinte Standard RIP supplies water and air to the weld guns and grippers that are carried on Robots. It also can filter the air supply and adjust its pressure. Measurement of water flow is capable of monitoring flow and cutting off circuit. What is mentioned above offers modular solution to pneumatic and water cycle systems for welding workshop equipment of BIW. Pic1 Product Module Product Parameters Operating pressure (air) Operating
KINTE STANDARD RIP
PRODUCT INTRODUCTION
Kinte Standard RIP supplies water and air to the weld guns and grippers that are carried on Robots. It also can filter the air supply and adjust its pressure. Measurement of water flow is capable of monitoring flow and cutting off circuit. What is mentioned above offers modular solution to pneumatic and water cycle systems for welding workshop equipment of BIW.
Pic1
Product Module
Product Parameters
| Operating pressure (air) | Operating pressure (water) | Fluid | Fluid temperature | Nominal filter value | Filter accuracy | Frame material | Oil port size |
| 0.05 to 0.85Mpa | 0 to 1 Mpa | Air, Water | -5 to 60℃(with no freezing) | 5 um | 80um | Aluminum | 1/2, 3/4 |
Product Advantages
Mino Standard RIP equipped with IP67 level Bus Module communicates with PLC through Bus Protocol
Inflow circuit with secondary water quality filter, filter accuracy 80μm, filter element can be recyclable
Pressure electronic flow monitoring device presents real-time value and respond the monitoring signals to robot for subsequent processing
Inflow and return loop with automatic shutdown function
Easy to install and disassemble,free to configure according to users’ requirements
Recommended Products
Video