three axis Gyro Accelerometer Integrated IMU complete inertial system
Product Description: The 16488H inertial measurement unit is a complete inertial system with a built-in three-axis gyroscope and a three-axis accelerometer, which is used to measure the three-axis angular rate, acceleration and other parameters of the carrier, and output the data after error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation, etc.) through SPI according to the communication protocol.
Product Description:
The 16488H inertial measurement unit is a complete inertial system with a built-in three-axis gyroscope and a three-axis accelerometer, which is used to measure the three-axis angular rate, acceleration and other parameters of the carrier, and output the data after error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation, etc.) through SPI according to the communication protocol.
Technical Parameters:
| Parameter | Specification |
| Gyro measure range | 450deg/s |
| Baud rate | 15 MHz |
| Power Consumption | 1.5 W |
| Power Supply Voltage | 3V~3.6V |
| Accelerometer zero-bias stability | 0.03 mg |
| Size | 47×44×14 |
| Accelerometer allan variance | 0.015 mg |
| Accelerometer measure range | 16 g |
| MTBF | > 20000h |
| Gyro scale factor nonlinearity | 0.01%FS |
Recommended Products
Video
Video
Video
Video
Video
Video