China EV Battery Case Pressure Testing System 2.5MPa 100ml Gas Filling Capacity for sale

Video

EV Battery Case Pressure Testing System 2.5MPa 100ml Gas Filling Capacity

Name: EV Battery Case Pressure Testing System 2.5MPa 100ml Gas Filling Capacity
Brand: Sinuo Testing Equipment Co. , Limited

This EV battery case pressure testing system evaluates casing strength under venting conditions. It features a booster pump, pressure sensor monitoring, and adjustable gas filling from 10-100ml. Fully automatic test cycle with manual loading. Ideal for quality control in battery manufacturing.

Place of Origin China

Sealing Joint Φ2.85±0.05mm

Gas Capacity 10-100ml

Packaging Details Plywood Case

Control Method Manually control

Model Number SN1123B

battery pack for speedlite heavy duty gym equipment bike washing equipment

Product Description

Battery Case Pressure Testing System EV Battery Testing Equipment

Equipment Overview

Samples and Limits: This device can test monolithic batteries containing chemistry using metal ions of electric vehicles.

A monolithic battery with metal ion chemistry is used in the test to measure the pressure that is applied to the appliance's shell when the battery vents as a result of a problem. to assess the battery's case's casing strength.

Test Principle: Increase the pressure using a booster pump, watch the pipeline-connected pressure sensor, and immediately report the pressure measurement. To make the sample's initial pressure approach 2070 kPa 10%, the control system regulates elements like electric valves and pressure-regulating valves. Then use an aperture with a diameter of 2.85±0.05mm to push the standard amount of air through the mechanism. Within 30 seconds, it falls to 70 kPa.

Technical Parameters

Use environment	Atmospheric pressure 80~106kpa; ambient temperature 5~40°C; relative humidity (20~80)%RH; place of use: no violent shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gases, good heat dissipation
Station	Single station
Device dimensions and weight	LWH=700×500×500 (mm), weight about: 100kg
Test pressure	0.01-2.5MPa, pressure sensor monitoring
Test medium	Gas
Test time	0-999999s, Can be set
Gas filling capacity	10-100ml adjustable, achievable (20, 30, 50, 100ml)
Sealing joint	One set as standard, orifice Φ2.85±0.05mm
Test procedure	Manual loading and unloading test, fully automatic testing process
Drive mode	Manual booster pump drive
Electrical control method	Manually control