Multilayer Grooved Drum Electric Cable Pulling Winch Hydraulic System

Multilayer Wire Rope Winding Grooved Drum For Electric Cable Pulling Winch

Introduction to pulling winch

The pulling winch consists of several parts, which are connected in series by wire rope. The working principle is to drive the whole system by the friction between the friction wheel and the wire rope, and the friction wheel is connected with the drive device. Generally, the width of the winch is within 1.5 m, which ensures the compactness and reliability of the entire transport unit. The traction winch is provided with tensioning device

product equipment

Our factory has more than 2000 sets of advanced equipment such as casting, forging, gear processing, sheet metal stamping, riveting, heat treatment and mechanical processing. In recent years, the Germany CW1000 machining center, CNC four axis, five axis linkage machining center, CNC punch, large CNC hobbing gear grinding machine, large CNC floor boring and milling machine, Vacuum electron beam welding, CNC welding robot and 80 roll machine and other advanced processing equipment.

We also supply LBS grooved drum used in all kinds of winchs. The whole drum details as follows:

1. the groove is cut directly into the body of drum.

2. according to the customer' requirements, the flanges are either welded or screw-bolted.

3. the groove is available as either LBS-groove or helical-groove.

4. groove geometry is determined by rope construction, diameter and length ,and by application.

5. the drum is provided with the requested mounting dimensions to fit the flanges by welding or screw bolting.

Sleeves are used to prevent damage to a drum. It is usually cheaper to replace a worn out sleeve in stead of replacing or repair the complete drum assembly.

Winch Drum parameter